Owner's Manual

Navigation Setup
You can set Navigation parameters.
D Display the Navigation Setup screen
Touch [ttl> [,.., 1> [Navigation]. (page 63)
II Set each item
[NAV Interrupt Speaker] Selects speakers
used for voice guidance
of the navigation
system.
([2) "Front All")
"Front
L": Uses the front left side speaker for
voice guidance.
"Front
R": Uses the front right side speaker for
voice guidance.
"Front All":
Uses both front speakers for voice
guidance
[NAV Voice Volume] Adjusts the volume for
voice guidance
of the navigation system.
(f2] DNX models: "25", DDX models: "21 ")
[Line Mute] Mutes the volume during voice
guidance
of the navigation system.
([2] "ON")
When turned
"ON", the volume level drops for
voice guidance.
[Navigation Input] Selects a navigation
system connection.
([2] "RGB") (DDX models
only)
"RGB": Allows the Kenwood's Navigation
System
to connect via its interface
cable.
"AV-IN": Allows a third-party navigation system
to connect via the AV INPUT1 port
"OFF": Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
sWitched.)
[On Screen Navigation] Sets an on-screen
display
of the navigation screen. ((~J "OFF")
(DDX models only)
"Auto": Information
is displayed for 5 seconds
when updated.
"OFF": Information is not displayed.
English 77