DNX9280BT GPS NAVIGATION SYSTEM INSTRUCTION MANUAL Before reading this manual, click the button below to check the latest edition and the modified pages. Check the latest edition © 2010 Kenwood Corporation All Rights Reserved.
Contents Precautions Notes How to read this manual Functions of the buttons on the front panel 4 5 10 12 Basic Operation 14 How to Display Top Menu Screen 14 Customization of Top Menu Screen 15 15 How to play media Detaching the monitor panel 16 Attaching the monitor panel 16 How to Display the Source Control Screen 17 Operation on the Playback Screen of 18 Visual Sources How to Display the Navigation Screen 20 Picture in Picture function 20 Secondary window function 21 Initial Setup 90
Hands Free Unit Control Before Use Downloading the Phonebook Receiving a Call During a Call Call Waiting Making a Call Calling by Phonebook Calling by Entering a Phone Number Making a Call Using Call Records Controlling Tone-based Services Setting Up the Hands-Free Phone Phone Number Preset SMS (Short Message Service) 48 48 48 48 48 49 49 50 50 51 51 52 53 54 Bluetooth Setup Registering Bluetooth Unit Registering Bluetooth Unit PIN Code Bluetooth Unit Connection Bluetooth Hands-Free/Aud
Precautions 2WARNING To prevent injury or fire, take the following precautions: • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. How to reset your unit • If the unit or the connected unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Notes List of playable discs • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Select a language used to display menus, audio file tags, etc. See (page 70). • The Radio Data System feature won’t work where the service is not supported by any broadcasting station.
Notes About Audio files • Playable Audio file AAC-LC (.m4a) MP3 (.mp3) WMA (.wma) Linear PCM (WAVE) (.wav) *1 ⁄ *1 Mass-storage-class USB device only • If music of normal CD and other playback systems are recorded in the same disc, only the playback system recorded at the first setout is played. • A cceptable media CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB device, iPod with KCA-iP302/ KCA-iP102 • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
iPod/iPhone that can be connected to this unit Made for • iPod touch (4th generation) • iPod touch (3rd generation) • iPod touch (2nd generation) • iPod touch (1st generation) • iPod classic • iPod with video • iPod nano (6th generation) • iPod nano (5th generation) • iPod nano (4th generation) • iPod nano (3rd generation) • iPod nano (2nd generation) • iPod nano (1st generation) • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone (As of January 2011) • Latest compatible list of iPod/iPhone.
Notes About the Cell-Phone This unit conforms to the following Bluetooth specifications: Version Bluetooth Standard Ver. 2.1 + EDR Profile HFP (Hands Free Profile) OPP (Object Push Profile) PBAP (Phonebook Access Profile) SYNC (Synchronization Profile) For the cell-phones verified for compatibility, access the following URL: http://www.kenwood.
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks Symbol With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
How to read this manual This manual uses illustrations to explain its operations. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Source Control Screen Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 27).
Drag or Flick operation Press the button, denoted by . It indicates that you scroll icons or list items left and right by flicking or dragging them and touch to select the desired one. The right mark indicates that they can be scrolled up and down. Function Icon Icons representing available functions are shown below. DVD-VIDEO : Function of DVD-VIDEO playback. Video CD : Function of Video CD playback. CD : Function of CD (CD-DA) playback. Audio File : Function of Audio File playback.
Functions of the buttons on the front panel A B C D E F G Reset button (page 4) Remote control sensor 1 sec. : Press for longer than 1 second A Attenuation of the volume On/Off. 1 sec. Switches the source that is output at the AV OUTPUT terminal. B Volume adjustment. Holding down a key turns up the volume in series up to 25. For more than 25, pressing the key turns up the volume one by one. C Displays Graphic Equalizer screen. *1 (page 61) 1 sec. Turns the display Off.
Functions of the buttons on the front panel G 1 sec. O pens the panel and ejects the disc. 1 sec. Closes the panel. 3 sec. Opens the panel fully. Detaching the front panel Security indicator (page 72) ⁄ • You can adjust the sensitivity of the buttons (touch sensors) on the front panel. See (page 70). *1 The display may not switch to Graphic Equalizer screen in some conditions. *2 The function of the [AUD] button can be changed to camera view function.
Basic Operation How to Display Top Menu Screen Top Menu Screen is the entrance to all the functions. You can select sources and various setup menus from this screen. Top Menu screen How to display the Top Menu screen When a video screen is displayed Buttons on the Top Menu screen For how to operate each source or setup, see the following pages.
Basic Operation Customization of Top Menu Screen 7 iPod Up to 3 sources or setups frequently used on the Top Menu screen can be registered. 1 Display the icon you want to register To disconnect the iPod, stop the playback by touching the [0] button on the source control screen, and then disconnect the iPod. See
Basic Operation Removing the SD card Push the SD card until it clicks and then remove your finger from the card. The card pops up so that you can pull it out with your fingers. Press the [0] button for longer than 1 second to close the front panel. ⁄ • The attaching plate closes automatically about 10 seconds after the monitor panel is released. Remove the monitor panel before this happens.
Basic Operation How to Display the Source Control Screen On the Source Control screen you can find all the control buttons for the selected source. While watching the navigation screen with secondary window Source Control Screen • For how to use each button, see the operation pages of each source. How to display the Source Control screen The Source Control Screen appears.
Basic Operation Operation on the Playback Screen of Visual Sources While watching visual sources, basic operation is possible by touching the screen. The screen has 4 function areas. The function of each area is different depending on the sources. (Some areas are unavailable for some sources.) Playback screen of a visual source While watching the Source Control Screen The Playback screen of a visual source appears.
Basic Operation Next page 3 English 19
Basic Operation How to Display the Navigation Screen Picture in Picture function Two screens, the navigation screen and source screen, are displayed. When Picture in Picture function is on, touching the source screen switches between the camera image and source image. The navigation screen appears. • For how to set up and use the navigation function, see the Navigation Instruction Manual. 1 sec.
Basic Operation Secondary window function You can control audio sources while the navigation screen is displayed, and view the navigation information while the source control screen is displayed. Navigation screen with Easy Control window 1 sec. Pressing the button for longer than 1 second while the source control screen is displayed switches the secondary window function on/off.
Watching DVD/Video CD You can play DVD/Video CD using various functions. • Set the remote controller mode switch to "DVD" mode before starting operation, see (page 84). Playback Screen Easy Control Screen Basic functions are available even when the playback screen is displayed. Displays the basic operation buttons on the screen. 1 Display the Easy Control Screen 1 Display the Playback Screen See (page 18).
Source Control Screen Multi Function Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 17). 2 Operation on the Source Control Screen DVD-VIDEO 2 1 ] Closes the multi function bar. DVD-VIDEO [TREP] Switches the Repeat Play operations in the following sequence. Title Repeat, Repeat Off [CREP] Switches the Repeat Play operations in the following sequence.
Watching DVD/VCD DVD-VIDEO Disc Menu ⁄ Selects an option from the DVD-VIDEO Disc Menu. • To cancel Highlight Control, press the [TEL] button for longer than 1 second. • The Highlight Control is cleared automatically after approximately 10 seconds. 1 Display the Playback Screen See (page 18). 2 Display the Menu Control 1 screen 5 Operation on the Menu Control 2 screen 3 Operation on the Menu Control 1 screen [Menu] Calls the Menu.
Video CD Zoom Control Displays an enlarged VCD screen. 1 Display the playback screen See (page 18). 2 Display the Zoom Control screen 3 Operation on the Zoom Control screen [Zoom] Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. [2], [3], [5], [∞] Scrolls the screen in the direction you touch. [Exit] Exits the Zoom Control screen.
Music CD/ Audio File Listening & Video File/ Picture File Watching You can recall various control screens during playback of CD, audio file, video file and picture file. • See (page 5) for playable discs. • See (page 6), (page 6) or (page 6) for playable files. • USB source cannot be used when connecting two iPods. Source Control Screen Switches to the source control screen to use various playback functions.
Link search (Audio File in USB) Multi Function Searches for another song of the currently selected artist. 1 Display the Source Control Screen See
Music CD/ Audio File Listening & Video File/ Picture File Watching List Search Folder list: Searches folders and Audio/ Video/ Picture files stored in media and devices according to hierarchy. Play list: Lists and searches music contained in the USB device. [ [ UP] Moves up a hierarchy level. CUR] Displays the currently playing category/ folder. Music or video list USB 2 1 Display the Source Control Screen See
Album Favorite List (USB) 5 Play the album in the Playlist You can create an original playlist of your favorite 10 albums by selecting album artworks. 1 Display the Source Control Screen See
Music CD/ Audio File Listening & Video File/ Picture File Watching Playback Screen (Video file, Picture file) Basic functions are available even when the playback screen is displayed. 1 Display the Playback Screen See (page 18). Easy Control Screen (Video file, Picture file) Displays the basic operation buttons on the screen.
Picture Control (USB) Movie Menu Control (Disc) Adjusting the picture display. Selects an option from the Movie Menu. 1 Display the Playback Screen See (page 18). 1 Display the playback screen See (page 18).
iPod Control You can control and listen to Music(s)/Video(s) in your iPod by connecting an iPod to this unit with KCA-iP302 (optional accessory). To connect the second iPod, use a KCA-iP102 (optional accessory). When Connecting One iPod 1A 5V 1A ⁄ 5V iPod1/USB iPod2 Connect the iPod to the iPod2 terminal with a KCA-iP302. When Connecting Two iPods 1A 5V 1A • Remove all accessories such as headphone before connecting an iPod.
Source Control Screen Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 17). [3] Plays. Dragging [3] left or right changes the playing position. Multi Function 2 Operation on the Source Control Screen 3 4 1 2 [38] Plays or pauses. [1], [¡] Fast Forwards or Fast Backwards. [4], [¢] Selects Next or Previous Music/ Video.
iPod Control iPod List Link search (Music file) Lists and searches music/video contained in the iPod. Searches for another song of the currently selected artist. 1 Display the Source Control Screen See
Album Favorite List You can create an original playlist of your favorite 10 albums by selecting album artworks. • You can change the playing order of the favorite list by dragging the artwork in the list. 5 Play the album in the Playlist 1 Display the Source Control Screen See (page 33). 2 Display the iPod artwork Screen The favorite list is played to the right starting with the selected album. ⁄ 3 Select an album artwork Touch desired artwork in the lower line.
Radio Listening Various control screens appear in the Tuner Source mode. • Set the remote controller mode switch to "AUD" mode before starting operation, see (page 84). Source Control Screen Multi Function Switches to the source control screen to use various functions. 1 Display the Source Control Screen See (page 17). 2 Operation on the Source Control screen 1 2 [FM] Switches to the FM1/2/3 band.
Preset Select Auto Memory Lists and selects memorized station. Stores stations with good reception in memory automatically. 1 Display the Source Control Screen See (page 36). 2 Display the Tuner Preset List Screen 1 Display the Source Control Screen See (page 36). 2 Select a band you wish to store in memory 3 Select a station 3 Select the Auto Memory mode 2 1 1 Memorized stations are displayed. Touch to tune in.
Radio Listening Manual Memory Radio Text Stores the current receiving station in memory. You can display the radio text. (Only when receiving the FM broadcast) 1 Display the Source Control Screen See (page 36). 2 Select a station you wish to store in memory 1 Select a station See (page 36). 2 Display the radio text 3 Store in memory 2 sec. Continue to touch until the memory number appears.
Traffic Information Search by Program Type When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. A program is tuned when you set its program type. (Only when receiving the FM broadcast) 1 Display the Source Control Screen See (page 36). 1 Display the Source Control Screen See (page 36).
TV Watching Various control screens appear in the TV source mode. You can only operate TV with the optional accessory TV Tuner connected. Function During TV Screen Easy Control Screen Basic functions are available even when the TV screen is displayed. Displays the basic operation buttons on the screen. 1 Display the Easy Control Screen 1 Display the TV screen See (page 18).
Source Control Screen Switches to source control screen to use various functions. 1 Display the Source Control Screen See (page 17). 2 Operation on the Source Control Screen 3 1 2 [SEEK]*1 Switches the Seek mode. The mode is switched in the following order each time you touch the button. Display Setting "AUTO1" Tunes in a station with good reception automatically. "AUTO2" Tunes in stations in memory one after another.
TV Watching TV Menu (only with KTC-D600E/D500E (optional accessory) connected) Menu Control screen appears by touching the area shown below. 1 Display the TV screen See (page 18). Auto Memory Stores stations with good reception in memory automatically. 1 Display the Source Control Screen See (page 41).
Manual Memory Preset Select Stores the current receiving channel in memory. Lists and selects memorized station. 1 Display the Source Control Screen See (page 41). 1 Display the Source Control Screen See (page 41). 2 Select a station you wish to store in memory 2 Start Preset Select 3 Store in memory 3 Select a station 2 3 1 2 sec. Continue to touch until the memory number appears. 1 Memorized stations are displayed. Touch to tune in.
Bluetooth Audio Control You can listen to audio files stored in a Bluetooth audio player or cell-phone. Before Use Source Control Screen • For details on the Bluetooth Audio player which can be connected, see (page 8). • You need to register your audio player and cell-phone before using it with this unit. For more details, see (page 56). • If you have registered two or more audio players or cell-phones, you need to select one of them.
Voice Control The unit is equipped with Advanced Speech Recognition function which allows you to operate it with your voice. The supported languages are US English, UK English, French, German, Dutch, Italian, and Spanish. For information on the voice commands, refer to (separate volume). • ASR on the Language Setting screen should be set to "Enabled". See (page 70). Voice Control 1 Enter into the Voice control mode Press the Push-To-Talk switch.
Other Functions External Device Power Supply Control Controlling the external device power supply. 1 Display the Source Select Screen Muting Audio Volume upon Reception of Phone Call When a telephone call is made or received... The Phone Call ("Call Interrupt") screen appears, and system is paused. Phone Call ("Call Interrupt") screen 2 Display the EXT SW Control screen When the call ends... Hang up the phone. The system resumes playing automatically.
Screen Control Setting the monitor screen. Screen Control 1 Display the Easy Control Screen See (page 18). 2 Display the Screen Control screen [Dyn.Brightness] (Dynamic Brightness) The function compensates for Over Exposure and Under Exposure creating a clearer picture. ( "OFF") "OFF"/ "1"/ "2" [Mode] Selects a screen mode. You can select any of the following screen mode.
Hands Free Unit Control Various functions can be used in the Hands Free control mode. Before Use • For details on the Bluetooth cell-phone with the handsfree function, see (page 8). • You need to register your cell-phone before using it with this unit. For more details, see (page 56). • If you have registered two or more cell-phones, you need to select one of them. For more details, see (page 58).
Call Waiting [ [ [ ] • Answers another incoming call with the current call suspended. • Switching between the current call and waiting call Each touch of this button switches the calling party. ] Terminates the current call. Making a Call Displaying the control screen and using various functions. 1 Display the Hands-Free Control screen 2 Select a dialing method 1 1 Calls the displayed phone number. If you have registered a phone number in the Phonebook, the person's name is displayed.
Hands Free Unit Control Calling by Phonebook You can call a person using his/her phone number that you have registered in the Phonebook. 1 Display the Hands-Free Control screen See (page 49). 2 Display the Phonebook screen • During search, a non-accent character such as "u" is searched for instead of an accent character such as "ü". Calling by Entering a Phone Number Makes a call by entering a phone number. 1 Display the Hands-Free Control screen See (page 49).
Making a Call Using Call Records Controlling Tone-based Services Calls by selecting a phone number from the outgoing, incoming, or missed calls list. Uses tone base service using DTMF (Dual Tone Multi Frequency). 1 Display the Hands-Free Control screen See (page 49). 2 Display the Outgoing Calls, Incoming Calls, or Missed Calls screen 3 Select from calls list 1 Display the Talking screen See (page 50).
Hands Free Unit Control Setting Up the Hands-Free Phone The Hands-Free system can be set as follows. 1 Display the Hands-Free Control screen See (page 49). 2 Display the Hands Free Setup screen 3 Set each item [SMS Use] Sets the SMS function. ( "ON") "ON": Use SMS function. "OFF": SMS not available. [Sort Order] Sorts the names in the phonebook. ( "Last") [Echo Cancel Level] Adjust the level of echo cancellation.
Phone Number Preset 5 Register phone number Registers frequently used phone number to Hands Free control screen preset button. 1 Display the Hands-Free Control screen See (page 49). 2 Select the Preset number to register 2 sec. ⁄ • If no Preset number is registered, pressing this button momentarily moves to the step 3. 3 Select the search destination of the number to register [ ] Registers from SMS received message list. [ ] Registers from SMS sent message list.
Hands Free Unit Control SMS (Short Message Service) 5 SMS Message screen Uses SMS function. 1 Display the Hands-Free Control screen See (page 49). 2 Display the SMS Select screen [ SMS] Creates a new message for the selected message. Create a message 1 Input the destination 3 Select a function [ ] Displays the SMS Create Menu screen. See . [ ] Displays received message list. [ ] Displays sent message list. [ ] Displays the SMS Create Menu screen.
3 Create a message 1 1 Enters characters. [2], [3] Moves the cursor. [5], [∞] Switches between key layouts. [Shift] Toggles between uppercase and lowercase. [qwe]/ [abc]/ [ALT] Sets the key layout of the character buttons. abc : Alphabetical key layout. qwe : Qwerty key layout. ALT : Alternate key [Clear] Erases the entered character. If touched more than 2 seconds, all the input characters are erased. [Space] Enters a space. [SET] Determines the message and returns to the SMS Create Menu screen.
Bluetooth Setup Registering Bluetooth Unit 5 Enter PIN code Registers the Bluetooth unit to be connected. 1 Display the Hands-Free Control screen 1 2 Display the Bluetooth Setup screen 1 Enters a code number. [Enter] Enter the PIN code specified for the Bluetooth unit to register. This button will not be active until at least four PIN code digits have been entered. [Cancel] Cancels registration of PIN code. [Clear] Clears the code number.
Registering Special Bluetooth Unit Registers Special Bluetooth unit that results in error by normal operation by selecting from model name. 1 Display the Special Device List screen Registering Bluetooth Unit PIN Code Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. 1 Display the Bluetooth Setup screen 2 Select a model name 2 Display the Receiver PIN Code screen Displays the Bluetooth unit name that can be registered.
Bluetooth Setup Bluetooth Unit Connection Bluetooth Hands-Free/Audio Output Setup Selects the Bluetooth unit to connect. Selects speakers to output the sound of hands-free phoning (such as phone call voice and ringing tone) and Bluetooth audio. 1 Display the Bluetooth Setup screen 1 Display the Bluetooth Setup screen 2 Display the Connect Device List screen 3 Select a registered Bluetooth unit [Bluetooth HF/Audio] Sets the output speakers.
English 59
Audio Control Audio Control Menu Audio Control Displays the Audio Control menu to set the sound effect function of this unit. You can adjust the front/rear and right/left audio balance. 1 Display the Source Control Screen 1 Display the Audio Control screen Touch [ ]>[ ] > [Audio Control]. (page 60) 2 Set each item When a video screen is displayed, press the [SRC] button. 1 2 Display the Audio Control menu In this manual, the above selection is indicated as: Touch [ ]>[ ].
Equalizer Control 3 Select the channel to be adjusted You can set up the equalizer. 1 Display the Equalizer screen Touch [ ]>[ ] > [Equalizer]. (page 60) 2 Select EQ curves [F] Front speaker [R] Rear speaker [C] Center speaker 4 Set the Graphic Equalizer [Natural], [Rock], [Pops], [Easy], [Top40], [Jazz], [Game], [iPod], [User] Selects an equalizer curve type. You can select any of the following equalizer curves. 1 ⁄ • [iPod] During iPod source only.
Audio Control Zone Control Listening Position You can set the front and rear audio source. You can adjust the sound effects according to your listening position. 1 Display the Zone Control screen Touch [ ]>[ ] > [Zone Control]. (page 60) 2 Set the Zone Control 1 Display the Position screen Touch [ ]>[ ] > [Position]. (page 60) 2 Set the Position Control [Single Zone] Sets the unit to single zone. [Dual Zone] Sets the unit to dual zone. [Front Source] Sets the front audio source.
Position DTA Control You can fine-adjust your listening position. 1 Display the Position DTA screen SRS WOW Control You can set up the SRS WOW effect. 1 Display the SRS WOW Control screen Touch [ ]>[ ] > [SRS WOW]. (page 60) 2 Set the SRS WOW Control 2 Select a speaker you wish to adjust 1 1 3 2 4 5 6 1 Selects SRS WOW setting.
Audio Control Surround Control Dolby Pro Logic II Music Adjustment You can set up the sound field. 1 Display the Dolby Pro Logic II Music Adjust screen 1 Display the Surround Control screen Touch [ ]>[ ] > [Surround Control]. (page 60) 2 Set the Surround Control 1 1 Sets a sound field. You can select any of the following sound fields.
Speaker Setup ⁄ You can select a speaker type and its size to get the best sound effects. • Select "None" if you have no speakers. • If you set the center speaker to "None" even in a short time when you are setting the Surround Control to "Bypass+Center", the Surround Control is set to "Bypass" automatically. See (page 64).
Audio Control Car Type (DTA) Setup Speaker Location setup You can setup the car type and speaker network, etc. 1 Display the Speaker Location Setup screen 1 Display the Car Type Setup screen Touch [ ]>[ ] > [Audio SETUP] > [Car Type]. (page 60) 2 Set the speaker locations 2 Setup the Car Type If your car type is selected, the Digital Time Alignment and Equalizer is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects.
3 Set a delay time Channel Level You can set the volume at each setup position. 1 Display the Car Type Setup screen Touch [ ]>[ ] > [Audio SETUP] > [Channel Level]. (page 60) 2 Select a speaker you wish to adjust Make fine adjustment of the delay time of the speaker output specified at to have a more suitable environment for your vehicle.
Setup Menu You can set up various receiver parameters. How to Display SETUP Menu Screen Displays the Setup menu to set various functions. 1 Display the Source Control Screen When a video screen is displayed, press the [SRC] button. 2 Display the Setup Menu Screen In this manual, the above selection is indicated as: Touch [ ]>[ ]. 3 Select the setup item ⁄ • [AV-IN SETUP] and [Navigation] options can be locked. See (page 74).
DivX Setup Deactivating DivX Code Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management). 1 Display the DivX Deactivation Confirm screen 1 Display the DivX Setup screen Touch [ ]>[ ] > [DivX(R) SETUP]. (page 68) 2 Cancel the registration Touching the screen displays a confirmation message. Touch [OK]. To cancel clearing, touch [Cancel]. Software Information Displays the registration code. ⁄ • Disabled when a DVD is being played.
Setup Menu User Interface Language Setting You can setup user interface parameters. You can select the display language for the control screen and audio file tags. 1 Display the User Interface screen Touch [ ]>[ ] > [System] > [User Interface]. (page 68) 2 Set each item 1 Display the User Interface screen Touch [ ]>[ ] > [System] > [User Interface]. (page 68) 2 Display the Language Setting screen 3 Select a language [Beep] Turns the key touch tone On or Off.
Touch Panel Adjustment Clock and Date Setup You can adjust the touch panel operations. You can adjust the clock time. 1 Display the Touch panel Adjustment screen Touch [ ]>[ ] > [System] > [Touch]. (page 68) 1 Display the Clock Setup screen Touch [ ]>[ ] > [System] > [Clock]. (page 68) 2 Adjust the Touch panel 2 Setup the Clock 1 Follow the instruction on the screen and touch the center of . [Cancel] Cancels the Touch Panel Adjust. [Reset] Resets to the initial status.
Setup Menu Security Setup 4 Enter a security Code You can set a security code to protect your receiver system against theft. ⁄ • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Display the Security screen Touch [ ]>[ ] > [System] > [Security]. (page 68) Input four-digit number.
Monitor Angle Control You can adjust the position of the monitor. 1 Display the Angle Setup screen Touch [ ]>[ ] > [Display] > [Angle]. (page 68) 2 Set the Monitor Angle [SW1 Name]/ [SW2 Name] Sets the name of the external device. See (page 73) for information on how to enter a name. [Output Pattern] Sets the power signal output mode. ( EXT SW1: Pulse, EXT SW2: Level) "Pulse": Generates a single power signal pulse.
Setup Menu Setup Memory Audio Control, AV-IN SETUP, Navigation, and Audio SETUP settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the SETUP Memory screen Touch [ ]>[ ] > [System] > [SETUP Memory].
Changing Background image 6 Load the image Loads an image from the connected USB device and sets it for the background image. 1 Connect the device which has the image to load 2 Display the Background screen Touch [ ]>[ ] > [Display] > [Background]. (page 68) 3 Change Standby [ [ ] Rotates counter clockwise. ] Rotates clockwise. 7 Select Background Change screen 8 Select an image for background 4 Display the Background Memory screen 1 1 Returns to the initial background.
Setup Menu Panel Color Coordinate To register your original color Sets the button illumination color. 1 Start the RGB coordinate 1 Display the Color screen Touch [ ]>[ ] > [Display] > [Color]. (page 68) 2 Display the Panel Color Coordinate screen 2 Adjust each color value 1 [Initialize] Initialization resets the settings made using the Panel Color SET process to the default settings set at the factory.
Screen Control AV Input Setup You can adjust the screen mode of the monitor. You can set AV input parameters. 1 Display the Screen Control screen Touch [ ]>[ ] > [Display] > [Screen Adjust]. (page 68) 1 Display the AV-IN Setup screen Touch [ ]>[ ] > [AV-IN SETUP]. (page 68) 2 Set each item 2 Set each item [Bright] Brightness Control [Contrast] Contrast Control [Black] Black Level Adjustment [Dimmer] Dimmer Mode Setup ( "SYNC") "ON": The display dims. "OFF": The display doesn’t dim.
Setup Menu AV Output Interface Setup Camera Setup You can set AV output parameters. You can set Camera parameters. 1 Display the AV-OUT Interface screen Touch [ ]>[ ] > [AV-OUT Interface]. (page 68) 1 Display the Camera Setup screen Touch [ ]>[ ] > [Camera SETUP]. (page 68) 2 Set each item 2 Set each item [AV-OUT] Selects an AV source to be output at the AV OUTPUT port. ( "VIDEO1") ⁄ • USB source cannot be selected when two iPods are connected.
Navigation Setup You can set Navigation parameters. 1 Display the Navigation Setup screen Touch [ ]>[ ] > [Navigation]. (page 68) 2 Set each item [NAV Interrupt Speaker] Selects speakers used for voice guidance of the navigation system. ( "Front All") "Front L": Uses the front left side speaker for voice guidance. "Front R": Uses the front right side speaker for voice guidance. "Front All": Uses both front speakers for voice guidance.
Setup Menu DVD Language Setup DVD Parental Level Setup Selects a language you use for the speech and menus. Sets a parental level. 1 Display the DVD Setup screen Touch [ ]>[ ] > [DVD SETUP]. (page 68) 2 Select the language item to set 3 Enter a language code See (page 92) and select the desired language. 1 Display the DVD Setup screen Touch [ ]>[ ] > [DVD SETUP].
5 Select a parental level and complete the setup Disc Setup Performs setup when using disc media. 1 Display the DVD Setup screen Touch [ ]>[ ] > [DVD SETUP]. (page 68) 2 Display the Disc Setup screen Selects a parental level. ⁄ • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc. • If a disc has no parental lock, anybody can play it back even when you have set the parental lock.
Setup Menu USB Setup iPod Setup Performs setup when using USB. Performs setup when using iPod. 1 Display the USB Setup screen Touch [ ]>[ ] > [USB SETUP]. (page 68) 1 Display the iPod Setup screen Touch [ ]>[ ] > [iPod SETUP]. (page 68) 2 Set each item 2 Set each item Example : USB Setup screen [Picture Display Time] Selects a picture display time. ( "Long") The Display of a JPEG picture is changed.
Tuner Setup TV Setup You can set Tuner related parameters. The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only) 1 Display the Tuner Setup screen ]>[ ] > [TUNER SETUP]. (page Touch [ 68) 2 Set each item [NEWS] Sets a news bulletin interrupt time. ( "OFF") [AF]*1 When station reception is poor, automatically switches to the station that is broadcasting the same program over the same Radio Data System network.
Remote Controller This unit can be operated using the Remote Controller supplied with this unit. ¤ CAUTION • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result.
Common operations (AUD mode) Source switching Switches to the source to be played. Volume control Adjusts the volume. Volume attenuator Press the key once to lower the volume. Press again to restore the previous volume. Hands-free communication When a call comes in, it answers the call. Function Switches the function screen. MODE Switches the screen mode. Screen mode changes each time you press this key. AV Output Selects an AV source to be output. Dual Zone Switches the Dual Zone function ON and OFF.
Remote Controller DVD/VCD (DVD mode) Chapter/ Scene/ Track search Selects the chapter, scene or track to be played. Play/Pause Pauses the chapter, scene or track. Press again to resume playing. Once you have switched to the direct search feature, specify the search number from the numeric keypad, and then press [ENTER] key. Numeric keypad • Specify the number to search in direct search. • Press 1 to fast forward/backward. 2 Switches the fast forward/backward speed each time you press this key.
Picture Angle Switches the picture angle each time you press this key. Music CD Track number Play time Cancel Audio/ Video files in DVD/CD disc AUDIO Switches the voice language each time you press this key. Folder number File number Cancel Once you have switched to the direct search feature, specify the search number from the numeric keypad, and then press [38] key. Numeric keypad Music CD/Audio file/Video file/ Picture file (AUD mode) Folder search Selects the folder to be played.
Remote Controller Radio (AUD mode) Numeric keypad FM band switching Switches to bands received by the unit. • To use preset tuning, press the number of a programmed broadcast station. ( 1 – 6 ) • Press the direct tuning key first, then specify the frequency of the station to receive. MNO AM band Navigation (NAV mode) Station selection Switches to broadcast stations received by the unit. Seek mode switching Switches the Seek mode (AUTO1, AUTO2, MANU).
POSITION Displays the current position. TV (TV mode) Switching Band It switches between the station of the TV band to receive and video input. ROUTE M Displays Route Option menu. Channel Selection The TV channel to receive is selected. VIEW Switches between 2D and 3D map displays. Numeric keypad VOICE Plays Voice guidance. • The number of the memorized station is selected. (1 – 6 ) • Press the direct tuning key first, then specify the channel of the station to receive.
Initial Setup When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is displayed. Initial Setup 1 Turns the power On 2 Set each item [Language] Select the language used for the control screen and setting items. (page 70) [Angle] You can adjust the position of the monitor. (page 73) [iPod AV Interface Use] You can determine the use of iPod/AV-IN3 input terminal. ( "iPod") "iPod": Select when connecting the iPod using the KCA-iP302 for iPod.
Status bar Indicator items Shown below is a list of indicators displayed on the Status bar. Source Tuner Display Overview "AF" "AUTO1" "AUTO2" "EON" "LO.
DVD Language Codes Code Language Code Language Code Language aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gl gn gu ha he hi hr hu hy ia ie ik id is it ja jv ka Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter. • Cannot set up the high pass filter. ▲ Subwoofer is not set to On. (page 65) ▲ The Dual zone function is enabled. (page 62) ! • Cannot select the output destination of the subsource in the Dual zone.
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. "Protect" : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. ➡ Wire or insulate the speaker cord as appropriate and then push the Reset button. "Hot Error" : When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit.
English 95
Specifications Monitor section Picture Size : 6.95 inches (diagonal) wide : 156.6 mm (W) x 81.6 mm (H) Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 1,152,000 (800H x 480V x RGB) Effective Pixels : 99.
LW tuner section Frequency Range (9 kHz space) : 153 kHz – 279 kHz Usable Sensitivity : 45 μV MW tuner section Frequency Range (9 kHz space) : 531 kHz – 1611 kHz Usable Sensitivity : 25 μV Audio section Maximum Power (Front & Rear) : 50 W x 4 Full Bandwidth Power (Front & Rear) (PWR DIN 45324, +B=14.4V) : 30 W x 4 Preout Level (V) : 5 V/ 10 kΩ Preout Impedance : 80 Ω Speaker Impedance :4–8Ω DSP Section Graphics equalizer Band: 13 Band Frequency (BAND1 – 13) : 62.5/ 100/ 160/ 250/ 400/ 630/ 1k/ 1.6k/ 2.
Specifications Navigation section Receiver : High-sensitivity GPS receiver Reception Frequency : 1575.42 MHz (C/A code) Acquisition Times Cold : < 38 seconds Factory Reset : < 45 seconds (On average for a stationary receiver with a clear view of the sky) Accuracy Position : < 10 meters typical Velocity : 0.05 m/sec. RMS Position Method : GPS Antenna : External GPS antenna External SW Maximum Power Supply Current : 500 mA General Operating voltage : 14.4 V (10.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.
Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English Hereby, Kenwood declares that this unit DNX9280BT is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.