Instruction Manual

16 DNX9280BT
Basic Operation
Removing the SD card
Push the SD card until it clicks and then remove
your finger from the card. The card pops up so
that you can pull it out with your fingers.
Press the [0] button for longer than 1 second to
close the front panel.
⁄
• The playback starts automatically after loading the
media or connecting the device.
Detaching the monitor panel
1 Open the front panel
0
3 sec.
Press the [0] button for longer than 3 seconds to
open the front panel before turning the ignition
off.
⁄
• You can set the front panel to open automatically
when the ignition is turned off. Refer to <Monitor
Angle Control> (page 73).
2 Detach the monitor panel
2
3
1
4
⁄
• The attaching plate closes automatically about 10
seconds after the monitor panel is released. Remove
the monitor panel before this happens.
3 Put the monitor panel in the protective bag
Attaching the monitor panel
Hold the monitor panel securely so as not to
drop it accidentally.
Fit the monitor panel onto the attaching plate
until it is firmly locked.
1
1
2
3