Instruction Manual
36 DNX9280BT
Radio Listening
Source Control Screen
Switches to the source control screen to use various
functions.
1 Display the Source Control Screen
See <How to Display the Source Control Screen>
(page 17).
2 Operation on the Source Control screen
1
2
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[TI] Turns the Traffic Information function On or
Off.
See <Traffic Information> (page 39).
[4],[¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
2 Display the Tuner Preset List Screen. See
<Preset Select> (page 37).
1 Information display
FMFM
Selects the Program Service Name, Title
& Artist name, Station name, Radio Text plus, or
Radio Text.
"FM"/ "MW"/ "LW" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
[
] When the text is longer, the text display is
scrolled by touching it.
Various control screens appear in the Tuner Source mode.
• Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode
switch> (page 84).
Multi Function
[1/3] Switches the multi function display.
[
] Closes the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons appear, you
can recall the stations on memory.
For memory of broadcasting stations, see <Auto
Memory> (page 37) or <Manual Memory> (page
38).
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception
automatically.
"AUTO2" Tunes in stations in memory one after
another.
"MANU" Switches to the next frequency manually.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 37).
[PTY]
FMFM
Searches station by program type.
See <Search by Program Type> (page 39).
[MONO]
FMFM
Select the Monaural reception.
[4Line]/[2Line]
FMFM
Switches the number of
lines displayed in the Information Display.
[LO.S]
FMFM
Turns the Local Seek function ON
or Off.
[INFO]
FMFM
Displays Radio Text screen. See
<Radio Text> (page 38).