Instruction Manual

52 DNX9280BT
Hands Free Unit Control
Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows.
1 Display the Hands-Free Control screen
See <Making a Call> (page 49).
2 Display the Hands Free Setup screen
3 Set each item
[Auto Response] Sets an automatic response
time to pick-up an incoming call. ( "OFF")
"OFF": This function can not use.
"0-99": Sets to calling ring time (second).
[Call Beep] Sets the beep of the incoming call.
(
"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[SMS Receive Beep] Sets the beep of the
incoming SMS. (
"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[Phone Information Use] Sets whether to
use cell-phone phonebook, outgoing calls list,
incoming calls list and missed calls list. (
"ON")
"ON": Yes.
"OFF": No.
[SMS Use] Sets the SMS function.
(
"ON")
"ON": Use SMS function.
"OFF": SMS not available.
[Sort Order] Sorts the names in the phonebook.
(
"Last")
[Echo Cancel Level] Adjust the level of echo
cancellation. (
"15")
[Microphone Level] Adjusts the sensitivity of the
microphone for a telephone call. (
"2")
[Noise Reduction Level] Reduce the noises
generated by surrounding environment without
changing the microphone volume. Adjust the
voice of caller when it is not clear. (
"15")
[Restore] Restores the Hands Free SETUP value
to the initial value.
⁄
• Either the time interval for automatic answer set on
this unit or the time interval set on the cell-phone,
whichever is shorter, takes effect.