Instruction Manual

56 DNX9280BT

Registering Bluetooth Unit

Registers the Bluetooth unit to be connected.

1 Display the Hands-Free Control screen

2 Display the Bluetooth Setup screen

3 Search for a Bluetooth unit

4 Display the PIN Code Set screen

1 Display the PIN Code.

[

] When the text is longer, the text display is

scrolled by touching it.

[Search] Searches for a Bluetooth unit.

[Cancel] Cancels searching of Bluetooth unit.

[SP DEV] Registers a Bluetooth unit that cannot

be registered by normal register (pairing)

operation.

[PIN Code Set] Display the PIN Code Set screen.

⁄

• A new device cannot be registered if there are 5

registered Bluetooth units. Delete unnecessary

registration. See <Bluetooth Unit Connection> (page

58).

Bluetooth Setup

5 Enter PIN code

1 Enters a code number.

[Enter] Enter the PIN code specified for the

Bluetooth unit to register.

This button will not be active until at least four

PIN code digits have been entered.

[Cancel] Cancels registration of PIN code.

[Clear] Clears the code number.

6 Select the Bluetooth unit to register

1 Displays the searched Bluetooth unit.

Returns to the Connect Device List screen.

⁄

• You can also register from the Bluetooth unit side.

For the PIN code necessary for registration, see

<Registering Bluetooth Unit PIN Code> (page 57).

• If pairing cannot be done even when the PIN code is

correct, try <Registering Special Bluetooth Unit>.