Instruction Manual

64 DNX9280BT
Audio Control
Surround Control
You can set up the sound field.
1 Display the Surround Control screen
Touch [
] > [ ] > [Surround Control].
(page 60)
2 Set the Surround Control
1
1 Sets a sound field.
You can select any of the following sound fields.
"Bypass"/ "Bypass+Center"/ "Dolby Pro Logic II
Movie"/ "Dolby Pro Logic II Music"/ "Dolby Pro
Logic II Matrix"
[Stream Information] Displays the present
source information.
The stream (Dolby Digital, dts, Linear PCM, MPEG,
SDDS, AAC or MP3/WMA), input channels (front
or rear channels), and sampling frequency are
displayed.
⁄
• When you have selected the TV or TUNER source
and when you set the Dolby PL, we recommend you
to select the "Dolby PLII Matrix" mode. If you select
another Dolby PLII mode, the sound is NOT output
from rear speakers when you receive monaural
broadcasting sounds.
• Surround control can be set for each source.
• You can set the sound field when playback of a 2
channel (2/0) source.
Dolby Pro Logic II Music Adjustment
1 Display the Dolby Pro Logic II Music Adjust
screen
2 Adjust the sound field
[Dimension Control] Sets the surround position
by adjusting the front and rear volume balance.
[Center Width Control] Sets the vocal image
position by adjusting the right and left vocal
volume level.
[Panorama Mode] Turns the Panorama mode
On or Off.
⁄
• You cannot use the <Surround Control Adjustment>
during playback of a Multi-channel source.