Instruction Manual
72 DNX9280BT
Setup Menu
Security Setup
You can set a security code to protect your receiver
system against theft.
⁄
• When the Security Code function is activated, the
code cannot be changed and the function cannot be
released. Note the Security Code can be set as the 4
digit number of your choice.
1 Display the Security screen
Touch [
] > [ ] > [System] > [Security].
(page 68)
2 Setup the SI (Security Indicator)
[Security Code Set] Displays the Security code
input screen.
[SI] Turns the SI function on or off.
If turned "ON", the security indicator on the front
panel flashes when the vehicle ignition is off.
(
"ON")
3 Start Security Code setup
⁄
• If you have already completed the code registration,
[CLR] is displayed.
4 Enter a security Code
Input four-digit number.
5 Register your security code
6 Reenter the security code
Reenter the same security code as that you have
entered in Step 4 for confirmation.
⁄
• If you enter a different security code, the screen
returns to Step 4 (for the first code entry).
7 Register the security code again
Now, your security code is registered.
If you have pressed the Reset button or if you
have disconnected the Receiver from battery...
1 Enter the correct security code
You must enter the same security code as that
you have entered in Step 4.
2 Register your security code
Now, you can use your Receiver.