Instruction Manual

76 DNX9280BT

Setup Menu

Panel Color Coordinate

Sets the button illumination color.

1 Display the Color screen

Touch [

] > [ ] > [Display] > [Color].

(page 68)

2 Display the Panel Color Coordinate screen

[Initialize] Initialization resets the settings made

using the Panel Color SET process to the default

settings set at the factory.

[Panel Color Scan] When set to "ON", the

illumination color of the buttons changes one

after another.

⁄

• When touching [SET] or [Initialize], make sure [Panel

Color Scan] is set to "OFF".

3 Select a color

1 Sets to the touched color.

[Adjust] Sets and registers favorite color to the

preset buttons ([Preset1] – [Preset3]).

To register your original color

1 Start the RGB coordinate

2 Adjust each color value

1 Selects a preset number to register.

[Red Value] Adjusts the Red value.

[Green Value] Adjusts the Green value.

[Blue Value] Adjusts the Blue value.

3 Select a Preset number to register

2 sec.

Adjusted color is registered to the selected Preset

button.

4 Complete the color coordination