Instruction Manual

English
77
Next page 3
Screen Control
You can adjust the screen mode of the monitor.
1 Display the Screen Control screen
Touch [
] > [ ] > [Display] > [Screen
Adjust]. (page 68)
2 Set each item
[Bright] Brightness Control
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Dimmer] Dimmer Mode Setup
(
"SYNC")
"ON": The display dims.
"OFF": The display doesn’t dim.
"SYNC": Turning the Dimmer function On or Off
when the vehicle light control switch is turned
On or Off.
"NAV-SYNC": Turning the Dimmer function On
or Off according to the Navigation Day/Night
display setting.
⁄
• In this Screen Control screen, you can perform setups
for the menu screen. Setups for videos such as DVD can
be performed on the <Screen Control> (page 47).
AV Input Setup
You can set AV input parameters.
1 Display the AV-IN Setup screen
Touch [
] > [ ] > [AV-IN SETUP]. (page 68)
2 Set each item
[AV-IN Interruption] Sets an image display of
the system that is connected via the AV INPUT
port. ( "OFF")
"OFF": When the image source is switched,
an image entered via the AV INPUT port is
displayed.
"ON": When an image signal is entered via the
AV INPUT port, this image is displayed.
[iPod AV Interface Use] You can determine the
use of iPod/AV-IN3 input terminal. (
"iPod")
"iPod": Select when connecting the iPod using
the KCA-iP302 for iPod.
"AV-IN3": Select to play an AV component
connected to the iPod/AV-IN3 input terminal.
[AV-IN1 Name], [AV-IN2 Name], [AV-IN3 Name]
Sets a name to be displayed when you select a
system that is connected via the AV INPUT port.
(
"VIDEO")
⁄
• [iPod AV Interface Use]
This item can be set when in STANDBY source and also
the iPod is disconnected.
• [AV-IN Name]
Two AV-IN names are displayed when "iPod" is selected in
[iPod AV Interface Use] and three are displayed when not
selected.