GPS Navigation System Instruction Manual

42 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160
HD Radio™ Control
Direct Search
Tuning in by entering the desired frequency or
channel number.
KTC-HR300 (optional accessory) connected only.
Display the Source 1 Control Screen
See <Source Control Screen> (page 40).
Start Direct Search2
Enter the frequency or channel number3
1
1
1
1 Enters the frequency or channel number.
[Mode] Switches the search mode to
Frequency or Channel.
[Cancel] Cancels the direct search.
[Clear] Clears the frequency or channel
number.
Tune in the frequency or channel4
Receive mode
Sets the radio broadcasts receive mode.
Display the Source 1 Control Screen
See <Source Control Screen> (page 40).
Display the Receive mode screen2
Select the receive mode3
[Receive Mode] The Receive mode switches in
the following order.
"Auto": Automatically tunes to analog
broadcast when there is no digital
broadcast.
"Digital": Digital broadcasts only.
"Analog": Analog broadcasts only.
B64-4602-00_02_K_En.indd 42B64-4602-00_02_K_En.indd 42 10.2.18 2:50:48 PM10.2.18 2:50:48 PM