GPS NAVIGATION SYSTEM DNX SERIES DNX7360BT DNX7360BTM MONITOR WITH DVD RECEIVER DDX SERIES DDX8036BT DDX7036BT DDX8036BTM DDX7036BTM INSTRUCTION MANUAL This instruction manual is used to describe models listed below. Model availability and features (functions) may differ depending on the country and sales area.
Contents Before Use 4 Notes 5 How to read this manual 10 Functions of the buttons on the front panel 12 Initial Setup Basic Operation 100 14 How to Display Top Menu Screen 14 Customization of Top Menu Screen 15 How to play media 16 Detaching the monitor panel 17 Attaching the monitor panel 17 How to Display the Source Control Screen 18 Operation on the Playback Screen of Visual Sources 19 How to Display the Navigation Screen 20 Picture in Picture function 20 Secondary window function 21 Radio Listening
Hands Free Unit Control Before Use Downloading the Phonebook Receiving a Call During a Call Call Waiting Making a Call Calling by Phonebook Calling by Entering a Phone Number Making a Call Using Call Records Calling by Voice Recognition Controlling Tone-based Services Setting Up the Hands-Free Phone Voice Registration Key Word Voice Registration Phone Number Preset SMS (Short Message Service) Audio Control Audio Control Menu Audio Control Equalizer Control Graphic Equalizer Setup Zone Control Space Enhance
Before Use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. How to reset your unit • If the unit or the connected unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Notes Discs that cannot be used List of playable discs • Discs that are not round cannot be used. Disc types Support Standard DVD Video DVD Audio DVD-VR DVD-R CD . This unit may not correctly play discs which do not have the mark. • You cannot play a disc that has not been finalized. (For the finalization process refer to your writing software, and your recorder instruction manual.
Notes Use of "DualDisc" Root (1) When playing a "DualDisc" on this unit, the surface of the disc that is not played may be scratched while the disc is inserted or ejected. Since the music CD surface does not conform to the CD standard, playback may be impossible. (A "DualDisc" is a disc with one surface containing DVD standard signals and the other surface containing music CD signals.) About Audio files • Playable Audio file AAC-LC (.m4a) MP3 (.mp3) WMA (.wma) Linear PCM (WAVE) (.
• Acceptable media Mass-storage-class USB device, SD/SDHC card Acceptable discs, disc formats, USB device or SD card file system, file and folder names and playing order are the same as those for audio files. See .
Notes About SD card (DDX series only) About the Cell-Phone • This unit is capable of playback of SD/SDHC memory cards complying with the SD or SDHC standard. • A special adapter is required to use a miniSD card, miniSDHC card, microSD card or microSDHC card. • The MultiMedia Card (MMC) cannot be used. This unit conforms to the following Bluetooth specifications: Version Bluetooth Standard Ver. 2.
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks Symbol With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
How to read this manual This manual uses illustrations to explain its operations. Source Control Screen The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 27).
Drag or Flick operation Press the button, denoted by It indicates that you scroll icons or list items left and right by flicking or dragging them and touch to select the desired one. The right mark indicates that they can be scrolled up and down. About the model groups If different functions are used in different model groups, the model groups are described as shown below.
Functions of the buttons on the front panel For DDX series A B C D E F G Reset button (page 4) Remote control sensor 1 sec. : Press for longer than 1 second A Attenuation of the volume On/Off. 1 sec. Switches the source that is output at the AV OUTPUT terminal. B Volume adjustment. C Displays Graphic Equalizer screen. *1 (page 62) 1 sec. Camera view display On/Off. *2 D DNX series and DDX series with navigation unit Displays the navigation screen.
Functions of the buttons on the front panel E Turns the power On. *5 Displays the Source Control screen. (page 18) In case of visual sources, the playback screen is first displayed and changed to the source control screen by pressing the button again. 1 sec. Turns the power Off. F Displays the Hands Free Control screen. 1 sec. While watching the Source Control screen Secondary window function On/Off. *4 (page 21) 1 sec. While watching the navigation screen Displays the Screen Control screen.
Basic Operation How to Display Top Menu Screen Top Menu Screen is the entrance to all the functions. You can select sources and various setup menus from this screen. Top Menu screen Touch the [MENU] button on any screen. The Top Menu Screen appears. How to display the Top Menu screen DNX series and DDX series with navigation unit DDX series without navigation unit The Top Menu Screen appears.
Basic Operation 1 [ ]* Displays Tools screen of navigation. [ ]*1 Displays Where To ? screen of navigation. [ ] Switches to the navigation screen. [ ] Switches to the Hands Free Main screen. [ ]*1 Displays Navigation Settings screen. [ ] Displays SETUP Menu screen. (page 67) [ ] Displays Hands Free SETUP screen. (page 76) [ ] Displays Audio Control Menu screen. (page 61) [ ] Displays the EXT SW (External Switch) Control screen.
Basic Operation How to play media 7 Disc media 7 SD card For DNX series: Update the navigation software. For DDX series: Audio File Listening & Video File/ Picture File Watching 0 Press the [0] button to open/close the front panel. If a disc is already inserted, it is ejected by pressing the [0] button. 7 iPod 0 1 sec. Press the [0] button for longer than 1 second to open the front panel.
Basic Operation Detaching the monitor panel 1 Open the front panel • It closes automatically when no operation is done for about a minute. 3 Put the monitor panel in the protective bag 0 1 sec. Press the [0] button for longer than 1 second to open the front panel before turning the ignition off. ⁄ • You can set the front panel to open automatically when the ignition is turned off. Refer to (page 71).
Basic Operation How to Display the Source Control Screen While watching the navigation screen with secondary window On the Source Control screen you can find all the control buttons for the selected source. Source Control Screen • For how to use each button, see the operation pages of each source. How to display the Source Control screen The Source Control Screen appears. ⁄ • The screen will return to the navigation screen by touching the same part of the Source Control screen.
Basic Operation Operation on the Playback Screen of Visual Sources While watching visual sources, basic operation is possible by touching the screen. The screen has 4 function areas. The function of each area is different depending on the sources. (Some areas are unavailable for some sources.) The Playback screen of a visual source appears. While watching the Source Control Screen Playback screen of a visual source The Playback screen of a visual source appears.
Basic Operation How to Display the Navigation Screen DNX series The navigation screen appears. DDX series with navigation unit Picture in Picture function Two screens, the navigation screen and source screen, are displayed. When Picture in Picture function is on, touching the source screen switches between the camera image and source image. 1 sec. Pressing the button for longer than 1 second while the navigation screen is displayed switches the Picture in Picture function on/off.
Basic Operation Secondary window function You can control audio sources while the navigation screen is displayed, and view the navigation information while the source control screen is displayed. Navigation screen with Easy Control window 1 sec. Pressing the button for longer than 1 second while the source control screen is displayed switches the secondary window function on/off.
Watching DVD/Video CD You can play DVD/Video CD using various functions. • Set the remote controller mode switch to "DVD" mode before starting operation, see (page 92). Playback Screen Easy Control Screen Basic functions are available even when the playback screen is displayed. Displays the basic operation buttons on the screen. 1 Display the Playback Screen See (page 19).
Source Control Screen Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 18). 2 Operation on the Source Control Screen DVD-VIDEO 1 Video CD [4], [¢] DVD-VIDEO Searches for a chapter. Video CD Selects a scene (when PBC is On) or a track (when PBC is Off ). [ ], [ ] DVD-VIDEO Slow Forwards or Backwards. [ ] Switches to the playback screen. 1 Information display Volume Label.
Watching DVD/VCD Video CD [REP] Switches the Repeat Play operations in the following sequence. Track Repeat, Repeat Off (Available when the PBC is off ) [TIME] Switches the play time display in the following sequence. Track ("P"), remaining discs ("R") (Effective only when the PBC function is off ) [PBC] Turns the PBC On or Off. (only when VCD Ver 2.0 is in use) [2], [3], [5], [∞] Selects a menu option. [Enter] Enters your menu selection. [Return] Returns to the previous menu screen.
[Previous] Displays the Menu Control 1 screen. [Angle] Switches the picture angle. [SUB] Switches the subtitle language. [Audio] Switches the voice language. [Zoom] Displays the Zoom Control screen. [Exit] Exits the Menu Control 2 screen. Video CD Zoom Control Displays an enlarged VCD screen. 1 Display the playback screen See (page 19).
Music CD/ Audio File Listening & Video File/ Picture File Watching You can recall various control screens during playback of CD, audio file, video file and picture file. • See (page 5) for playable discs. • See (page 6), (page 6) or (page 6) for playable files. [0] Source Control Screen Switches to the source control screen to use various playback functions.
the folder and the file number display "3" Play Mode Display "P"/ "R" Play Time Display Use the [TIME] to change play time display. [ ] When appears, the text display is scrolled by touching it. USB/SD Slider control Use the [CTRL]/ [Slider] to change the control mode. [3] Plays. Dragging [3] left or right changes the playing position. Multi Function [INFO] Displays music information of CD-TEXT being played.
Music CD/ Audio File Listening & Video File/ Picture File Watching List Search Folder list: Searches folders and Audio/ Video/ Picture files stored in media and devices according to hierarchy. Play list: Lists and searches music contained in the USB device or SD card. 1 Display the Source Control Screen See
Thumbnail Viewer 2 USB/SD 1 Album artwork (USB/SD) Searches for songs in an album artwork in USB/SD. 1 Display the Source Control Screen See
Music CD/ Audio File Listening & Video File/ Picture File Watching Link search (Audio File in USB/SD) Searches for another song of the currently selected artist. 1 Display the Source Control Screen See
Easy Control Screen (Video file, Picture file) Displays the basic operation buttons on the screen. 1 Display the Easy Control Screen Picture Control (USB/SD) Adjusting the picture display. 1 Display the Playback Screen See (page 19). 2 Display the Picture Control Screen 2 Operation on the Easy Control Screen 3 Adjust the picture display 1 2 3 1, 2 Switches to the Playback Screen.
Music CD/ Audio File Listening & Video File/ Picture File Watching Movie Menu Control (Disc) Selects an option from the Movie Menu. 1 Display the playback screen See (page 19). 2 Display the Menu Control screen 3 Operation on the Menu Control screen [SUB] Switches the subtitle language. [Audio] Switches the voice language. [Exit] Exits the Menu Control screen. 32 DNX series DNX7360BT/ DNX7360BTM B64-4697-10_01_M_English.
iPod Control You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Playback Screen Easy Control Screen Basic functions are available even when the playback screen is displayed. Displays the basic operation buttons on the screen. 1 Display the Playback Screen See (page 19).
iPod Control Source Control Screen Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 18). 2 Operation on the Source Control Screen 3 1 2 [3] Plays. Dragging [3] left or right changes the playing position. Multi Function [38] Plays or pauses. [1], [¡] Fast Forwards or Fast Backwards. [4], [¢] Selects Next or Previous Music/Video. 2 Displays the iPod list. See (page 35).
⁄ [ *1 Disabled when VIDEO is being played. • [Hand] – In the iPod Control by Hand Mode, iPod cannot be operated using this unit. – This mode is not compatible with music information display. – iPod can be operated when it conforms to the iPod control function. iPod List Lists and searches music/video contained in the iPod. [ [ [ [ ] When appears, the text display is scrolled by touching it. ALL] Lists all the music in the selected category. TOP] Moves to the top category.
iPod Control iPod Album Artwork Link search (Music file) Searches for songs in an album artwork in iPod. Searches for another song of the currently selected artist. 1 Display the Source Control Screen See
Radio Listening Various control screens appear in the Tuner Source mode. • Set the remote controller mode switch to "AUD" mode before starting operation, see (page 92). Multi Function Source Control Screen Switches to the source control screen to use various functions. 1 Display the Source Control Screen See (page 18). 2 Operation on the Source Control screen 1 2 [FM] Switches to the FM1/2/3 band. [AM] Switches to the AM band.
Radio Listening [4Line]/ [2Line] FM Switches the number of lines displayed in the Information Display. [CRSC]*1 FM Switches to Monaural to decrease noise when reception is poor. [LO.S]*2 FM Turns the Local Seek function ON or Off. [INFO]*2 FM Displays Radio Text screen. See (page 39). Auto Memory Stores stations with good reception in memory automatically. 1 Display the Source Control Screen See (page 37).
Manual Memory Radio Text (Region 2/ 3 models) Stores the current receiving station in memory. You can display the radio text. (Only when receiving the FM broadcast) 1 Display the Source Control Screen See (page 37). 1 Select a station See (page 37). 2 Select a station you wish to store in memory 2 Display the radio text 3 Store in memory 2 sec. Continue to touch until the memory number appears.
Radio Listening Traffic Information (Region 2/ 3 models) Search by Program Type (Region 2/ 3 models) When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. A program is tuned when you set its program type. (Only when receiving the FM broadcast) 1 Display the Source Control Screen See (page 37). 1 Display the Source Control Screen See (page 37).
Frequency Step Setting (Region 4/ 6 models) Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 Switch the frequency step While pressing [NAV] (DNX series)/ [TOP] (DDX series) button and [0] button, press the Reset button. Release your fingers from the buttons after the display appears. The frequency step changes to FM band 200 kHz, and AM band 10 kHz. DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM B64-4697-10_01_M_English.
TV Watching Various control screens appear in the TV source mode. You can only operate TV with the optional accessory TV Tuner connected. Function During TV Screen Easy Control Screen Basic functions are available even when the TV screen is displayed. Displays the basic operation buttons on the screen. 1 Display the TV screen See (page 19). 1 Display the Easy Control Screen 2 Operation on the TV screen 1 3 4 2 1 Switches to TV1 or TV2.
Source Control Screen Switches to source control screen to use various functions. 1 Display the Source Control Screen See (page 18). 2 Operation on the Source Control Screen 1 2 [BAND] Switches to TV1 or TV2. [4], [¢] Select a channel. Use the [SEEK] to change the channel tuning sequence. 2 Display the TV Preset List Screen. See (page 45). [ ] Switches to the TV screen.
TV Watching Auto Memory Manual Memory Stores stations with good reception in memory automatically. Stores the current receiving channel in memory. 1 Display the Source Control Screen See (page 43). 1 Display the Source Control Screen See (page 43). 2 Select a band you wish to store in memory 2 Select a station you wish to store in memory 3 Select the Auto Memory mode 3 Store in memory 4 Start Auto Memory 2 sec.
Preset Select Lists and selects memorized station. 1 Display the Source Control Screen See (page 43). 2 Start Preset Select 3 Select a station 2 1 1 Memorized stations are displayed. Touch to tune in. 2 Returns to the Source Control screen. [ ] Switches to the TV screen. DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM B64-4697-10_01_M_English.
Bluetooth Audio Control You can listen to audio files stored in a Bluetooth audio player or cell-phone. Before Use Source Control Screen • For details on the Bluetooth Audio player which can be connected, see (page 8). • You need to register your audio player and cellphone before using it with this unit. For more details, see (page 76). • If you have registered two or more audio players or cell-phones, you need to select one of them.
Other Functions External Device Power Supply Control Controlling the external device power supply. 1 Display the Source Select Screen Muting Audio Volume upon Reception of Phone Call When a telephone call is mode or received... The Phone Call ("Call Interrupt") screen appears, and system is paused. Phone Call ("Call Interrupt") screen 2 Display the EXT SW Control screen When the call ends... Hang up the phone. The system resumes playing automatically.
Screen Control Setting the monitor screen. Screen Control 1 Display the Easy Control Screen See (page 19). 2 Display the Screen Control screen When the navigation screen is displayed, press the [TEL] button for 1 second or more. 3 Adjust the picture quality [Dimmer] Dimmer Mode Setup "ON": The display dims. "OFF": The display doesn’t dim. "SYNC": Turning the Dimmer function On or Off when the vehicle light control switch is turned On or Off.
Hands Free Unit Control Various functions can be used in the Hands Free control mode. Before Use • For details on the Bluetooth cell-phone with the hands-free function, see (page 8). • You need to register your cell-phone before using it with this unit. For more details, see (page 76). • If you have registered two or more cell-phones, you need to select one of them. For more details, see (page 79).
Hands Free Unit Control During a Call Making a Call Displaying the control screen and using various functions. 1 Display the Hands-Free Control screen [ ] Switches the voice output between phone and speaker. [DTMF] Outputs dial tone. See (page 54). [ ] Disconnecting a call Adjusting the Voice Volume during a Call Call Waiting [ [ 50 ] • Answers another incoming call with the current call suspended.
Call Using Call Records> (page 52). Missed Calls] Displays the Missed Calls screen. See (page 52). [Direct Number] Displays the Dialing Display screen. See (page 52). [Voice] Starts voice recognition. See (page 53). [BT SETUP] Displays the Bluetooth SETUP screen. See (page 76). [TEL SETUP] Displays the Hands Free Setup screen. See (page 55).
Hands Free Unit Control ⁄ 4 Make a call • To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your cellphone. • Characters with no corresponding name will not be displayed. • During search, a non-accent character such as "u" is searched for instead of an accent character such as "ü". You can start talking when the recipient responds. ⁄ • You can input up to 32 digits. • This function is unavailable while driving.
4 Make a call ■ If there is only one phone number assigned under the registered name 3 Say the name registered in the Phonebook ⁄ • The Outgoing Calls list screen, Incoming Calls list, or Missed Calls list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the cell-phone memory. Calling by Voice Recognition Calls by recognizing the registered voice. ⁄ When a beep is heard, say the name within 2 seconds.
Hands Free Unit Control 6 Make a call Controlling Tone-based Services Uses tone base service using DTMF (Dual Tone Multi Frequency). 1 Display the Talking screen See (page 52). 2 Display the DTMF input screen ■ If there are more than one phone numbers registered under the same name, go to step 7. 7 Select a Phone number category 3 You can send tones during a call Selects the Phone number category.
Setting Up the Hands-Free Phone The Hands-Free system can be set as follows. 1 Display the Hands-Free Control screen See (page 50). 2 Display the Hands Free Setup screen 3 Set each item [Call Beep] Sets the beep of the incoming call. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. [SMS Receive Beep] Sets the beep of the incoming SMS. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled.
Hands Free Unit Control Voice Registration Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one cell-phone. 4 Say the name to register (2nd try) Say within 2 seconds after the Beep. 5 End voice registration 1 Display the Phonebook Detail screen Go through the procedure of (page 51). 2 Display the voice registration screen ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation.
Key Word Voice Registration 4 Display voice registration screen Registers the voice to select the Phone number category by Voice Recognition. 1 Display the Hands Free Setup screen See (page 55). 5 Say the phone category to register (1st try) 2 Display the Key Word List screen Say within 2 seconds after the Beep. 3 Select the Phone number category to register 6 Say the phone category to register (2nd try) Say within 2 seconds after the Beep.
Hands Free Unit Control Phone Number Preset Registers frequently used phone number to Hands Free control screen preset button. 1 Display the Hands-Free Control screen See (page 50). 2 Select the Preset number to register [Voice] Registers voice for voice recognition to preset number. [Memory] Registers the currently displayed phone number. [Delete] Deletes the currently displayed phone number. Touch to display the confirmation screen. Touch [Yes] to delete or [No] to cancel.
3 Select a function [ ] Displays the SMS Create Menu screen. See . [ ] Displays received message list. [ ] Displays sent message list. [ ] Displays the SMS Create Menu screen. See . The button will be active when any message has been created after poweron. [Download] Retrieves SMS messages from the cell-phone. 5 SMS Message screen [ SMS] Creates a new message for the selected message.
Hands Free Unit Control 2 Display the Create SMS Message screen 3 Create a message 1 1 Enters characters. [2], [3] Moves the cursor. [5], [∞] Scrolls up or down the character button display. [Shift] Toggles between uppercase and lowercase. [qwe]/ [abc]/ [ALT] Sets the key layout of the character buttons. abc : Alphabetical key layout. qwe : Qwerty key layout. ALT : Alternate key [Clear] Erases the entered character. If touched more than 2 seconds, all the input characters are erased.
Audio Control Audio Control Menu Displays the Audio Control menu to set the sound effect function of this unit. Item [Position] [Surround Control] Page 64 66 1 Display the Source Control Screen Audio Control You can adjust the front/rear and right/left audio balance. When a video screen is displayed, press the [SRC] button. 2 Display the Audio Control menu 1 Display the Audio Control screen ]>[ ] > [Audio Touch [ Control].
Audio Control ⁄ ⁄ • If you have increased the volume first, then reduced the volume using the "Volume Offset", the sound generated if you suddenly switch to another source may be extremely loud. • [iPod] During iPod source only. [Subwoofer Level] Adjusts the subwoofer volume. The setting is available when subwoofer is set to any item other than "None". See (page 83). [Bass Boost] Sets the amount of bass boost.
4 Set the Graphic Equalizer DDX8 series 1 Zone Control You can set the front and rear audio source. 1 Display the Zone Control screen ]>[ ] > [Zone Touch [ Control]. (page 61) 2 Set the Zone Control DNX7/ DDX7 series 1 1 Gain level can be adjusted by touching the each frequency bar. [2], [3] Sets a frequency. [5], [∞] Sets a gain level. [EQ Init] Returns to the previous level which the gain level is adjusted. [Flat] Tone curve becomes flat. [Bass EXT] Bass Extend settings.
Audio Control ⁄ Listening Position • There are following limitations when zone function is set to "ON". - There is no output from the subwoofer or center speaker. - "Subwoofer Level", "Bass Boost", and "Supreme" of
• Only the adjusted distance of position setup (Position and Position DTA values) is stored in memory. Therefore, the final adjustment distance changes if you change the Car Type Set Up value (page 84). Finely adjust the value set with the Position function. SRS WOW Control (DDX8 series) You can set up the SRS WOW effect. Position DTA Control You can fine-adjust your listening position. 1 Display the Position DTA screen 1 Display the SRS WOW Control screen ]>[ ] > [SRS WOW].
Audio Control ⁄ • FOCUS: Adjusts the vertical position of the speaker and sound image by virtual adjustment. • TruBass: Assists the playback for the super bass sound. • SRS 3D: Makes a natural 3D sound field. • Some items cannot be adjusted depending on the selected speaker. • SRS WOW control is not available in tuner source and TV source. • When Surround Control is Dolby Pro Logic II, SRS WOW control is not available.
Setup Menu You can set up various receiver parameters. How to Display SETUP Menu Screen Displays the Setup menu to set various functions. 1 Display the Source Control Screen When a video screen is displayed, press the [SRC] button. 2 Display the Setup Menu Screen In this manual, the above selection is indicated as: Touch [ ]>[ ]. 3 Select the setup item ⁄ • [AV-IN SETUP], [Navigation] and [Audio SETUP] options can be locked. The key mark ( ) is displayed in reverse video for the locked option.
Setup Menu DivX Setup 2 Cancel the registration Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management). 1 Display the DivX Setup screen ]>[ ] > [DivX(R) Touch [ SETUP]. (page 67) Touching the screen displays a confirmation message. Touch [OK]. To cancel clearing, touch [Cancel]. Software Information Checks the software version of this unit. 1 Display the Software Information screen ]>[ ] > [Software].
User Interface You can setup user interface parameters. 1 Display the User Interface screen ]>[ ] > [System] > Touch [ [User Interface]. (page 67) 2 Set each item longer than 1 second to turn the display off. "CAM": Press the [AUD] button for longer than 1 second to switch to camera view. [Animation] Sets whether to display animation. ( "ON") Language Setting You can select the display language for the control screen and audio file tags.
Setup Menu When [Select Mode] is set to "Advanced" Touch Panel Adjustment You can adjust the touch panel operations. 1 Display the Touch panel Adjustment screen ]>[ ] > [System] > Touch [ [Touch]. (page 67) 2 Adjust the Touch panel [GUI Language Select] Selects the display language used for the control screen and so forth. ( Region 2/ 3/ 4 models: "British English (en)", Region 6 models: "中文 (zh)") [Navigation Language Select] Selects the language used for navigation.
[Synchronize] Sets the clock time in synchronization with the time data sent from the navigation system or the RDS station. ( DNX series: "Navigation", DDX series: "RDS") "OFF"/ "RDS"*1/ "Navigation" When the synchronized mode is set, the clock cannot be adjusted manually. (*1 Region 2/ 3 models only) Monitor Angle Control You can adjust the position of the monitor. 1 Display the Angle Setup screen ]>[ ] > [System] > Touch [ [Angle].
Setup Menu EXT SW Setup Sets up the exteral switch power mode. 1 Display the EXT SW screen ]>[ ] > [System] > Touch [ [EXT SW]. (page 67) 2 Perform EXT SW Setup [Pulse Set] Sets the Pulse signal output time. Outputs 500ms when "1" is set. Increases by 200ms with each step. Up to 100 steps can be set. How To Use the Character Entry Screen 1 [SW1 Name]/ [SW2 Name] Sets the name of the external device. See (page 72) for information on how to enter a name.
Setup Memory Audio Control, AV-IN SETUP, AV Interface, Navigation, and Audio SETUP settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the SETUP Memory screen ]>[ ] > [System] > Touch [ [SETUP Memory]. (page 67) 2 Start Setup Memory [Clear] Clears the currently memorized settings.
Setup Menu Changing Background image 5 Select the image to load Loads an image from the connected SD/ USB device and sets it for the background image. 1 Connect the device which has the image to load 2 Display the Background screen ]>[ ] > [Display] > Touch [ [Background]. (page 67) 6 Load the image 3 Change Standby 4 Display the Background Memory screen [ [ ] Rotates counter clockwise. ] Rotates clockwise.
⁄ 3 Select a color • See (page 6) for readable image specifications. • The [Memory] button on the “Background” screen becomes active only in STANDBY source mode. • Pressing the [Memory] button on the “Background” screen switches the AV OUT source to OFF. For resetting the AV OUT source, refer to (page 80). Panel Color Coordinate DDX8 series : Sets the button illumination color. DNX7/ DDX7 series : Sets the screen and button illumination color.
Setup Menu 3 Select a Preset number to register control switch is turned On or Off. "NAV-SYNC": Turning the Dimmer function On or Off according to the Navigation Day/Night display setting. (DNX series and DDX series with navigation unit only) ⁄ 2 sec. Adjusted color is registered to the selected Preset button. • In this Screen Control screen, you can perform setups for the menu screen. Setups for videos such as DVD can be performed on the (page 48).
[Search] Searches for a Bluetooth unit. [SP DEV] Registers a Bluetooth unit that cannot be registered by normal register (pairing) operation. [Clear] Clears the code number. 6 Select the Bluetooth unit to register 1 ⁄ • A new device cannot be registered if there are 5 registered Bluetooth units. Delete unnecessary registration. See (page 79). 4 Display the PIN Code Set screen 1 Displays the searched Bluetooth unit. Returns to the Connect Device List screen.
Setup Menu 3 Confirm whether to register Registering Bluetooth Unit PIN Code Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. 1 Display the Bluetooth Setup screen ]>[ ] > [Bluetooth Touch [ SETUP]. (page 67) ⁄ 2 Display the Receiver PIN Code screen • Only models in Bluetooth unit name list can be registered.
Bluetooth Unit Connection Selects the Bluetooth unit to connect. 1 Display the Bluetooth Setup screen ]>[ ] > [Bluetooth Touch [ SETUP]. (page 67) 2 Display the Connect Device List screen Bluetooth Hands-Free/Audio Output Setup Selects speakers to output the sound of hands-free phoning (such as phone call voice and ringing tone) and Bluetooth audio. 1 Display the Bluetooth Setup screen ]>[ ] > [Bluetooth Touch [ SETUP].
Setup Menu AV Input Setup AV Output Interface Setup You can set AV input parameters. You can set AV output parameters. 1 Display the AV-IN Setup screen ]>[ ] > [AV-IN SETUP]. Touch [ (page 67) 1 Display the AV-OUT Interface screen ]>[ ] > [AV-OUT Touch [ Interface]. (page 67) 2 Set each item 2 Set each item [AV-IN Interruption] Sets an image display of the system that is connected via the AV INPUT port.
Camera Setup You can set Camera parameters. 1 Display the Camera Setup screen ]>[ ] > [Camera Touch [ SETUP]. (page 67) [Front Camera] Turn this setting on when the CMOS-300 with ID2 set is connected. ( "OFF") [F-CAM Settings] Adjusts the CMOS300 with ID 2 set. For details, see the option manual. 2 Set each item [Rear Camera] Selects the type of rear camera to use. ( "Other") "CMOS-300": When the CMOS-300 with ID 1 set is connected. "Other": When the other camera is connected.
Setup Menu Navigation Setup You can set Navigation parameters. 1 Display the Navigation Setup screen ]>[ ] > [Navigation]. Touch [ (page 67) 2 Set each item "AV-IN": Allows a third-party navigation system to connect via the AV INPUT1 port. "OFF": Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched.) [On Screen Navigation] Sets an on-screen display of the navigation screen.
Speaker Setup You can select a speaker type and its size to get the best sound effects. 1 Display the Speaker Select screen ]>[ ] > [Audio SETUP] Touch [ > [Speaker Select]. (page 67) 2 Select a speaker you wish to adjust When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically. 1 2 3 4 1 Center speaker (DDX8 series) 2 Front speaker 3 Rear speaker 4 Subwoofer [Tweeter] You can set the tweeter when you are selecting front speakers.
Setup Menu 2 Display the Crossover setup screen Car Type (DTA) Setup You can setup the car type and speaker network, etc. 3 Set the crossover 1 Display the Car Type Setup screen ]>[ ] > [Audio SETUP] Touch [ > [Car Type]. (page 67) 2 Setup the Car Type If your car type is selected, the Digital Time Alignment and Equalizer is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. [Phase] Sets the phase of subwoofer output.
2 Set the speaker locations [Front Speaker] Sets the location of the front speaker. "Door", "On Dash", "Under Dash" [Rear Speaker] Sets the location of the rear speaker. "Door", "Rear Deck" "2nd Row", "3rd Row" (Minivan, Minivan (Long)) Car Type Adjust You can manually set the sound output timing of each channel.
Setup Menu Channel Level (DDX8 series) DVD Setup You can set the volume at each setup position. You can set up the DVD play. 1 Display the Car Type Setup screen ]>[ ] > [Audio SETUP] Touch [ > [Channel Level]. (page 67) 1 Display the DVD Setup screen ]>[ ] > [DVD SETUP].
a Dolby Digital software. The operation is available during the play stop mode. [Angle Mark] Sets an angle mark display. ( "ON") [Screen Ratio]*1 Selects the screen display mode. ( "16:9") "16:9": Displays wide pictures. "4:3 LB": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen). "4:3 PS": Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends). [Parental Level]*1 Displays the Parental Lock screen.
Setup Menu DVD Parental Level Setup Sets a parental level. 4 Display the Parental Level SETUP screen 1 Display the DVD Setup screen ]>[ ] > [DVD SETUP]. Touch [ (page 67) 2 Display the Parental Level code number screen 5 Select a parental level and complete the setup Selects a parental level. 3 Enter the code number 1 ⁄ • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc.
Disc Setup Performs setup when using disc media. 1 Display the DVD Setup screen ]>[ ] > [DVD SETUP]. Touch [ (page 67) ⁄ • [CD Read] Disabled when a disc is in the unit. You cannot play an Audio file/VCD disc in the "2" position. Also, you may not play some music CDs in the "2" position. 2 Display the Disc Setup screen 3 Set each item [CD Read] Sets a music CD playback. ( "1") "1": Automatically recognizes and plays back an Audio file disc, a DVD or a music CD.
Setup Menu USB/ SD Setup iPod Setup Performs setup when using USB or SD. Performs setup when using iPod. 1 Display the USB/ SD Setup screen ]>[ ] > [USB SETUP] Touch [ or [SD SETUP]. (page 67) 1 Display the iPod Setup screen ]>[ ] > [iPod SETUP]. Touch [ (page 67) 2 Set each item 2 Set each item Example : USB Setup screen [Picture Display Time] Selects a picture display time. ( "Long") The Display of a JPEG picture is changed.
Tuner Setup TV Setup You can set Tuner related parameters. The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only) 1 Display the Tuner Setup screen Touch [ ]>[ ] > [TUNER SETUP]. (page 67) 2 Set each item 1 Display the TV SETUP screen ]>[ ] > [TV SETUP]. Touch [ (page 67) 2 Set each item [NEWS] Sets a news bulletin interrupt time.
Remote Controller This unit can be operated using the Remote Controller supplied with this unit. RC-DV331 : Accessory of DNX7/ DDX8 series RC-DV340 : Accessory of DDX7 series ¤ CAUTION • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not leave the battery near fire or under direct sunlight.
TV mode This is switched when controlling TV. Rear volume control Adjusts volume at rear when the Dual Zone function is ON. NAV mode (RC-DV331 only) This is switched when controlling Navigation unit. 1 2ABC 3 DEF 1 5JKL 6MNO R.VOL 7PQRS 8TUV 9WXYZ ⁄ CLEAR • The position of the remote control mode switch is indicated in the title of each mode, e.g., "(AUD mode)". • When controlling a player that is not integrated in the unit, select "AUD" mode. DIRECT ATT DISP SRC V.
Remote Controller VCD 1.X, VCD 2.X (PBC OFF) DVD/VCD (DVD mode) [RC-DV331] Track number Cancel [RC-DV340] Track search and file search Selects the track or file to be played. VCD 2.X (PBC ON) O O AM− FM+ D Y OPEN VOL 1 O 2ABC 3 DEF 1 2 ZONE 4 5 6 Play/Pause Pauses the track. Press again to resume playing.
DVD Menu Displays the DVD menu. Turns the playback control on or off while playing VCD. DISP SRC MODE V.SEL FNC/PBC TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM SUBTITLE Switches the subtitle language. DISP SRC V.SEL MODE FNC/PBC TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM ZOOM Switches the zoom ratio each time you press this key. DISP SRC V.
Remote Controller Once you have switched to the direct search feature, specify the search number from the numeric keypad, and then press [38] key. Music CD/Audio file/Video file/ Picture file (AUD mode) [RC-DV331] [RC-DV340] Folder search Selects the folder to be played. Numeric keypad 1 2ABC 3 DEF 1 FM+ D 7PQRS 8TUV 9WXYZ OPEN VOL 5JKL 6MNO R.VOL O AM− 2 ZONE 4GHI O CLEAR 0 DIRECT ATT O Y 1 2ABC 3 DEF 1 2 ZONE • Specify the number to search in direct search.
Example: 810kHz (AM) Radio (AUD mode) [RC-DV331] 8TUV [RC-DV340] 1 0 1 8TUV « FM band switching Switches to bands received by the unit. 0 « or or O O AM− FM+ D Numeric keypad OPEN VOL 1 O 2ABC 3 DEF 1 2ABC 3 DEF 1 Y 1 2 ZONE 4GHI 2 ZONE 5JKL 6MNO R.VOL 7PQRS 8TUV 9WXYZ AM band CLEAR 0 DIRECT ATT O O AM− FM+ D Y OPEN VOL 1 O 2ABC 3 DEF 1 2 ZONE • To use preset tuning, press the number of a programmed broadcast station.
Remote Controller Navigation (NAV mode) [RC-DV331] [—] ROUTE M Displays Route Option menu. Cursor key Scrolls the map, or moves the cursor. VIEW Switches between 2D and 3D map displays. ENTER Performs the selected function. VOICE Plays Voice guidance. ZOOM Zooms in or out the navigation map. MAP DIR Switches between the heading up navigation and north up navigation map displays. MENU Displays Main menu. CANCEL Displays previous screen. POSITION Displays the current position.
TV (TV mode) [RC-DV331] [RC-DV340] Switching Band/Video It switches between the station of the TV band to receive and video input. O O AM− FM+ D Y OPEN VOL 1 1 O 2ABC 3 DEF 2 ZONE Channel Selection The TV channel to receive is selected. O O AM− FM+ D Y OPEN VOL 1 1 O 2ABC 3 DEF 2 ZONE 4 5 6 4GHI 5JKL 6MNO Direct tuning (NTSC TV type only) R.
Initial Setup When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is displayed. Initial Setup 3 End initial setup 1 Turns the power On 2 Set each item ⁄ • The settings above can be changed in (page 67). [Language] Select the language used for the control screen and setting items. (page 69) [Angle] You can adjust the position of the monitor. (page 71) [iPod AV Interface Use] Sets the terminal which the iPod is connected to.
Status bar Indicator items Source Display Overview iPod Shown below is a list of indicators displayed on the Status bar. Tuner Source Display Overview General "ATT" "DUAL" "TEL" DVD/CD "FO-REP" "IN" USB/ SD "1chRR" "1chST" "LL" "LR" "RR" "ST" "PBC" "SVCD" "VER1" "VER2" "REP" "FO-REP" "VIDEO" "MUSIC" "PICTURE" "RDM" "REP" "PLST" TV DVD- VCD Video "VIDEO" "MUSIC" "RDM" "REP" "C-REP" "T-REP" "1chLL" "1chLR" Indicates that the attenuator is active. Turns on the Dual zone function.
DVD Language Codes Code Language Code Language Code Language aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gli gn gu ha he hi hr hu hy ia Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Ga
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter. • Cannot set up the high pass filter. ▲ Subwoofer is not set to On. ☞ (page 83) ▲ The Dual zone function is enabled. ☞ (page 63) ! ! • Cannot select the output destination of the subsource in the Dual zone.
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. "Protect" : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. ➡ Wire or insulate the speaker cord as appropriate and then push the Reset button. "Hot Error" : When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit.
"Authorization Error" : Connection to the iPod has failed. ➡ Remove the iPod and then reconnect it. The unit does not support the iPod. ➡ Refer to (page 7). "Update your iPod" : The iPod's software is an older version which the unit can not support. ➡ Confirm that the software for the iPod is the latest version. Refer to (page 7). "You only can connect one iPod." : More than one iPod are connected to this unit.
Specifications Monitor section Picture Size : 6.95 inches (diagonal) wide : 156.6 mm (W) x 81.6 mm (H) Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 1,152,000 (800H x 480V x RGB) Effective Pixels : 99.
Bluetooth section Technology : Bluetooth Ver.2.1 + EDR Certified Frequency : 2.402 – 2.480 GHz Output Power : +4dBm (MAX), 0dBm (AVE), Power Class2 Maximum Communication range : Line of sight approx. 10m (32.
Specifications DSP Section Graphics equalizer DDX8 series Band : 13 Band Frequency (BAND1 – 13) : 62.5/ 100/ 160/ 250/ 400/ 630/ 1k/ 1.6k/ 2.5k/ 4k/ 6.3k/ 10k/ 16k Hz Channel : Front/ Rear/ Center DNX7/ DDX7 series Band : 5 Band Frequency (BAND1 – 5) : 62.
External SW Maximum Power Supply Current : 500 mA General Operating voltage : 14.4 V (10.5 – 16 V allowable) Maximum Current Consumption : 15 A Dimensions (W × H × D) : 182.7 × 100.0 × 180 mm Operational Temperature Range : -10 °C – +60 °C Storage Temperature Range : -20 °C – +85 °C Weight DNX series : 2.65 kg DDX series : 2.61 kg Specifications subject to change without notice. Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.
The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
DNX7360BTM/ DDX8036BTM/ DDX7036BTM: Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English Turkish Hereby, Kenwood declares that this unit DNX7360BTM/ DDX8036BTM/ DDX7036BTM is in compliance with the essential requir