GPS NAVIGATION SYSTEM DNX SERIES DNX6960 DNX6460BT DNX6160 DNX5160 DNX6020EX MONITOR WITH DVD RECEIVER DDX SERIES DDX616 DDX6046BT DDX516 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System/DVD Receiver.
Contents Before Use Notes How to read this manual 4 5 8 Initial Setup 90 Radio Listening 32 Functions of the buttons on the front panel 10 Getting Started 12 How to Display the Navigation Screen How to Select the Source How to Set a Medium / a Device Basic Operation How to Display the Source Control Screen How to Display Top Menu Screen Operation on the Playback Screen of Visual Sources How to Display the Easy Control Screen 12 12 13 14 14 15 16 17 Source Control Screen Preset Select Auto Memory
Hands-Free Phoning Before Use Downloading the Phonebook Receiving a Call During a Call Call Waiting Making a Call Calling by Phonebook Calling by Entering a Phone Number Making a Call Using Call Records Calling by Voice Recognition Controlling Tone-based Services Setting Up the Hands-Free Phone Voice Registration Key Word Voice Registration Phone Number Preset SMS (Short Message Service) Audio Control Audio Control Menu Audio Control Equalizer Control Tone Setup Zone Control Remote Controller Battery inst
Before Use Handling discs 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. How to reset your unit • If the unit or the connected unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Notes About Audio files List of playable discs Disc types DVD CD Standard Support DVD Video DVD Audio DVD-VR DVD-R ‡ × ‡ ‡ DVD-RW ‡ DVD+R ‡ DVD+RW ‡ DVD-R DL (Dual layer) DVD+R DL (Double layer) DVD-RAM Music CD ‡ ‡ × ‡ CD-ROM ‡ CD-R ‡ CD-RW ‡ DTS-CD Video CD (VCD) Super video CD Photo CD CD-EXTRA ‡ ‡ × × % HDCD % CCCD Dualdisc Super audio CD × × % Others Remark Not compatible with CPRM.
Notes About Picture files About USB device • Acceptable picture files JPEG • Extensions jpg, jpeg • Acceptable media CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB device Acceptable discs, disc formats, USB device file system, file and folder names and playing order are the same as those for audio files. See . • In this manual, the word "USB device" is used for flash memories and digital audio players which have USB terminals.
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks Symbol With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
How to read this manual This manual uses illustrations to explain its operations. Source Control Screen The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Switches to the source control screen to use various functions. 1 Display the Source Control Screen See .
About the model groups If different functions are used in different model groups, the model groups are described as shown below. Names of models included in each model group are as follows: DNX series DNX6960, DNX6160, DNX6020EX, DNX6460BT, T DNX5160 DDX series DDX616, DDX6046BT, T DDX516 Function Icon Icons representing available functions are shown below. : Function of DVD-VIDEO playback. : Function of DVD-VR playback. : Function of Video CD playback. : Function of CD (CD-DA) playback.
Functions of the buttons on the front panel Security indicator (page 66) Remote control sensor Reset button (page 4) B Disc slot (page 13) A TEL TAG For DDX series NAV VOL ATT AUD C TOP ATT VOL AUD D SRC R-CAM FNC For DNX series microSD card slot for upgrading the navigation system (page 13) NAV MAP AV-IN E F Input jack for external device 1 sec. : Press for more than 1 second A B Ejects the disc. DNX series Displays the navigation screen.
Functions of the buttons on the front panel E DNX series DDX series with navigation unit 7 While watching the playback screen of a visual source Displays the Easy Control screen. & 7 While watching the navigation screen Displays the Screen Control screen. y 7 While watching the screen other than the above Screen Switching function On/Off. ! 1 sec. Rear view display On/Off.*2 DDX series without navigation unit ⁄ *2 The function of the [FNC] button can be changed to the display off function.
Getting Started How to Display the Navigation Screen How to Select the Source DNX series Sources can be selected from the Source Select screen. Source Select screen NAV VOL ATT AUD The navigation screen appears. DDX series TOP VOL ATT SRC AUD The Source Select screen appears. Touch the icon of the source. Use or to turn the page. For how to operate each source, see the following pages. The navigation screen appears.
Getting Started How to Set a Medium / a Device 7 Disc media DNX series 7 microSD card This microSD card slot is used to upgrade the Navigation System. For how to upgrade the Navigation System, refer to the instruction manual of the navigation system. If a disc is already inserted, it is ejected by pressing the [0] button. 7 iPod To disconnect the iPod, stop the playback by touching the [38] button on the source control screen, and then disconnect the iPod. See (page 30).
Basic Operation How to Display the Source Control Screen On the Source Control screen you can find all the control buttons for the selected source. DDX series Source Control screen TOP VOL ATT AUD • For how to use each button, see the operation pages of each source. How to display the Source Control screen DNX series DDX series with navigation unit The Source Control screen appears. 7 While watching the Easy Control screen 7 While watching the navigation screen The Source Control screen appears.
Basic Operation How to Display Top Menu Screen Top Menu screen is the entrance to all the functions. You can enter source operation screen as well as various setup menu from this screen. Top Menu screen How to display the Top Menu screen Buttons on the Top Menu screen V ] Switches to the navigation screen. [NAV [SRC] Switches to the source control screen of the selected source. The icon of this button changes according to the selected source. [TEL ] Switches to the Hands Free Main screen.
Basic Operation Operation on the Playback Screen of Visual Sources How to display the playback screen While watching visual sources, basic operation is possible by touching the screen. SRC The screen has 4 function areas. The function of each area is different depending on the sources. (Some areas are unavailable for some sources.) Playback screen of a visual source The Source Select screen appears. Touch the icon of the source. 2 1 3 4 Basic operation of each area 1 Reverse search.
Basic Operation How to Display the Easy Control Screen Basic operation buttons of the selected source can be displayed on the playback screen of visual sources so that you can control the source without switching the screen. Easy Control screen Buttons on the Easy Control screen [∞] Changes the function as follows by touching the [∞] button. [SCRN] Displays Screen Control screen (page 46). [TEL] Switches to the Hands Free Main screen (page 49). [1], [¡], [4], [¢], [7], [£8] Buttons for source control.
Watching DVD/Video CD You can play DVD/Video CD using various functions. • Set the remote controller mode switch to "DVD" mode before starting operation, see (page 84). Playback Screen Easy Control Screen Basic functions are available even when the playback screen is displayed. Displays the basic operation buttons on the screen. 1 Display the Playback Screen 1 Display the Easy Control Screen See (page 16).
Source Control Screen Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen "3" Play Mode Display "T"/ "C"/ "R"/ "P" Play Time Display Use the [TIME] to change play time display. [ ] When appears, the text display is scrolled by touching it. Multi Function DVD-VIDEO/DVD-VR 1 [ [ ] Closes the multi function bar. ] Opens the multi function bar.
Watching DVD/Video CD DVD-VIDEO Disc Menu Selects an option from the DVD-VIDEO Disc Menu. 1 Display the Playback Screen See (page 16). 2 Display the Menu Control 1 screen ⁄ • Touching the central part of the monitor also turns on the Highlight Control. • To cancel Highlight Control, press the [FNC] button. • The Highlight Control is cleared automatically after approximately 10 seconds.
[Zoom] Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off ) each time you touch. [2], [3], [5], [∞] Scrolls the screen in the direction you touch. [Return] Returns to the Menu Control 2 screen. [Exit] Exits the Zoom Control screen. DVD-VR Menu Control Selects an option from the DVD-VR Disc Menu. 1 Display the playback screen See (page 16).
Watching DVD/Video CD Video CD Zoom Control Displays an enlarged VCD screen. 1 Display the playback screen See (page 16). 2 Display the Zoom Control screen 3 Operation on the Zoom Control screen [Zoom] Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. [2], [3], [5], [∞] Scrolls the screen in the direction you touch. [Exit] Exits the Zoom Control screen.
Music Disc/ Audio File Listening & Video File/ Picture File Watching You can recall various control screens during playback of CD, audio file, video file and picture file. • See (page 5) for playable discs. • See (page 5), (page 5) or (page 6) for playable files. Source Control Screen Switches to the source control screen to use various playback functions.
Music Disc/ Audio File Listening & Video File/ Picture File Watching Audio File Au MPEG/DivX® JPEG [REP] Repeats the present file or data. [FREP] Repeats the music or data of the present folder. [RDM] Starts or stops Random Play (to play files of the present folder in random order). Not available if there are only picture files. [4Line]/ [2Line] Switches the number of lines displayed in the Information Display. [FOLD]/ [FLIST] Displays the folder list. [PLIST] Audio File in USB Displays the play list.
Play list Audio File in Au USB USB Device Select Selects the connected USB device (or a partition). 1 1 Display the Source Control Screen See (page 23). 2 Display the USB Device Select Screen 1 Switches to the lower level of the category. [ ] When appears, the text display is scrolled by touching it. [ ALL] Lists all the music in the selected category. [ UP] Moves to the upper level of the category. [ TOP] Moves to the top category.
Music Disc/ Audio File Listening & Video File/ Picture File Watching Link Search (Audio file in USB) Playback Screen (Video file, Picture file) Searches for another song of the currently selected artist. Basic functions are available even when the playback screen is displayed. 1 Display the Source Control Screen 1 Display the Playback Screen See (page 23). 2 Start Link search See (page 16).
Easy Control Screen (Video file, Picture file) Displays the basic operation buttons on the screen. 1 Display the Easy Control Screen See (page 17). Picture Control Adjusting the picture display. 1 Display the Playback Screen See (page 16). 2 Display the Picture Control Screen 2 Operation on the Easy Control Screen 1 2 3 1, 2 Switches to the Playback screen. 3 Displays the Source Control screen.
Music Disc/ Audio File Listening & Video File/ Picture File Watching Movie Menu Control Selects an option from the Movie Menu. 1 Display the playback screen See (page 16). 2 Display the Menu Control screen 3 Operation on the Menu Control screen [SUB] Switches the subtitle language. [Audio] Switches the voice language. [Exit] Exits the Menu Control screen. 28 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160 B64-4602-00_02_K_En.indd 28 10.2.
iPod Control You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Playback Screen Easy Control Screen Basic functions are available even when the playback screen is displayed. Displays the basic operation buttons on the screen.
iPod Control Source Control Screen Multi Function Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen 1 [38] Plays or pauses. [1], [¡] Fast Forwards or Fast Backwards. [4], [¢] Selects Music/Video. [List] Displays the iPod list. (page 31) [ ] Switches to the playback screen.
iPod List Link Search (Music file) Lists and searches music/video contained in the iPod. Searches for another song of the currently selected artist. 1 Display the Source Control Screen 1 Display the Source Control Screen See (page 30). See (page 30). 2 Display the iPod List 2 Start Link search 3 Select music/video 3 Select a song 1 1 Categories and music are listed. Touch a category name to move to its lower level.
Radio Listening Various control screens appear in the Tuner Source mode. • Set the remote controller mode switch to "AUD" mode before starting operation, see (page 84). Source Control Screen Multi Function Switches to the source control screen to use various functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen 1 [FM] Switches to the FM1/2/3 band. [AM] Switches to the AM band.
Preset Select Auto Memory Lists and selects memorized station. Stores stations with good reception in memory automatically. 1 Display the Source Control Screen See (page 32). 2 Display the Tuner Preset List Screen 1 Display the Source Control Screen See (page 32). 2 Select a band you wish to store in memory 3 Select a station 3 Select the Auto Memory mode 1 1 Memorized stations are displayed. Touch to tune in.
Radio Listening Manual Memory Radio Text Stores the current receiving station in memory. You can display the radio text. (Only when receiving the FM broadcast) 1 Display the Source Control Screen See (page 32). 2 Select a station you wish to store in memory 1 Select a station See (page 32). 2 Display the radio text 3 Store in memory 1 2 sec. Continue to touch until the memory number appears.
Set Station Name Assigns a name to a station. 1 Tune in to the station to name See (page 32). 2 Start Name set Traffic Information (North American sales area only) When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. 1 Display the Source Control Screen See (page 32). 2 Set the Traffic information mode 3 Enter the name See (page 45) for information on how to enter a name.
Radio Listening Search by Program Type (North American sales area only) A program is tuned when you set its program type. (Only when receiving the FM broadcast) 1 Display the Source Control Screen See (page 32). 2 Enter Program Type Search mode 3 Select a Program Type 1 1 Program Type is displayed. Touch to select a Program Type. [Search] Searches for the program type. It is displayed when the Program type is selected.
SIRIUS/XM Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (only with the optional accessory Satellite radio connected. To connect the SIRIUS tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.) • This document uses the SIRIUS display as an example.
SIRIUS/XM Control (North American sales area only) Channel Search Channel Memory Specifying the desired category and selecting a channel. Stores the current receiving channel in memory. 1 Display the Source Control Screen See (page 37). 2 Display the Category List Screen 1 Display the Source Control Screen See (page 37). 2 Select a channel you wish to store in memory 3 Select a category 1 1 Selects a category.
Direct Channel Search Tuning in by entering the desired channel number. 1 Display the Source Control Screen See (page 37). 2 Start Direct Channel Search 3 Enter the channel number 1 1 Enters the channel number. [Cancel] Cancels the direct channel search. [Clear] Clears the channel number. 4 Tune in the channel DDX SERIES DDX616/DDX6046BT/DDX516 B64-4602-00_02_K_En.indd 39 English 39 10.2.
HD Radio™ Control Various control screens appear in the HD Radio Source mode. (only with the optional accessory HD Radio tuner connected) Source Control Screen Multi Function Switches to the source control screen to use various functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen 1 [HD FM] Switches to the HD FM1/2/3 band. [HD AM] Switches to the HD AM band. [4], [¢] Tunes in a station.
Auto Memory Manual Memory Stores stations with good reception in memory automatically. Stores the current receiving station in memory. 1 Display the Source Control Screen See (page 40). 1 Display the Source Control Screen See (page 40). 2 Select a band you wish to store in memory 2 Select a station you wish to store in memory 3 Select the Auto Memory mode 3 Store in memory 2 sec. Continue to touch until the memory number appears.
HD Radio™ Control Receive mode Direct Search Sets the radio broadcasts receive mode. Tuning in by entering the desired frequency or channel number. 1 Display the Source Control Screen See (page 40). 2 Display the Receive mode screen KTC-HR300 (optional accessory) connected only. 1 Display the Source Control Screen See (page 40).
iTunes Tagging (HD Radio™ Tagging) Using an iTunes Tagging enabled HD Radio you can tag your music. When you hear a song you enjoy on your local HD Radio station, you only have to press the [TAG] button for at least 1 second. The song’s information will then be saved on this unit. The saved songs will then show up in a playlist called “Purchased” in iTunes the very next time you sync your iPod to your computer.
Bluetooth Audio Control (DNX5160/DDX516) You can listen to audio files stored in Bluetooth audio player and cell-phone. It is necessary to connect the optional Bluetooth unit KCA-BT200. • You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well. Before Use Source Control Screen • You need to register your audio player and cell-phone before using it with this unit.
Other Functions Muting Audio Volume upon Reception of Phone Call Character Entry Character Entry screen 1 When a telephone call is received... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen 1 Enters characters. [2], [3] Shifts the cursor. [5], [∞] Scrolls up or down the character button display. [QWE]/ [ABC] Sets the key layout of the character buttons. ABC : Alphabetical key layout. QWE : Qwerty key layout. [Clear] Clears the character.
Screen Control Setting the monitor screen. Screen Control 1 Display the Easy Control Screen See (page 17). 2 Display the Screen Control Screen "NAV-SYNC": Turning the Dimmer function On or Off according to the Navigation Day/Night display setting. (DNX series and DDX series with navigation unit only) [Mode] Selects a screen mode. You can select any of the following screen mode.
Hands-Free Phoning Various functions can be used in the Hands Free control mode. The following models need to connect the optional Bluetooth unit KCA-BT200: DNX5160 and DDX516 • You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well. • To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your Bluetooth Unit and your cell-phone.
Hands-Free Phoning Receiving a Call [ [ ] Answering a Phone Call ] Rejecting an Incoming Call Call Waiting [ ⁄ • While monitoring the rear view camera, this screen is not displayed even a call comes in. To display this screen, press the [TEL] button or return the shift knob of car to the drive position. During a Call [ ] • Answering another incoming call with the current call suspended • Switching between the current call and waiting call Each touch of this button switches the calling party.
Making a Call Displaying the control screen and using various functions. 1 Display the Hands-Free Control screen TEL TAG [Voice] Starts voice recognition. See (page 51). [BT SETUP] Displays the Bluetooth SETUP screen. See (page 70). [TEL SETUP] Displays the Hands Free Setup screen. See (page 53). ⁄ 2 Select a dialing method 1 • While your car is moving, some functions are disabled due to safety reasons.
Hands-Free Phoning Calling by Phonebook Calling by Entering a Phone Number You can call a person using his/her phone number that you have registered in the Phonebook. Makes a call by entering a phone number. 1 Display the Hands-Free Control screen See (page 49). 1 Display the Hands-Free Control screen See (page 49).
Making a Call Using Call Records Calling by Voice Recognition Calls by selecting a phone number from the outgoing, incoming, or missed calls list. Calls by recognizing the registered voice. 1 Display the Hands-Free Control screen • In order to perform voice recognition, voice must be registered in the Phonebook data. See (page 54). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc.) of Phonebook data, a key word voice must be registered.
Hands-Free Phoning 7 If there are more than one phone numbers assigned under the registered name 5 Say the key word registered for the category Controlling Tone-based Services Uses tone base service using DTMF (Dual Tone Multi Frequency). 1 Display the Talking screen See (page 50). 2 Display the DTMF input screen When a beep is heard, say the key word within 2 seconds.
Setting Up the Hands-Free Phone The Hands-Free system can be set as follows. 1 Display the Hands-Free Control screen See (page 49). 2 Display the Hands Free Setup screen 3 Set each item [SMS Receive Beep] Sets the beep of the incoming SMS. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. [Phone Information Use] Sets whether to use cell-phone phonebook, outgoing calls list, incoming calls list and missed calls list. ( "ON") "ON": Yes. "OFF": No. [SMS Use] Sets the SMS function.
Hands-Free Phoning Voice Registration 6 End voice registration Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one cell-phone. 1 Display the Phonebook Detail screen Go through the procedure of (page 50). 2 Select the name to register 1 ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation. • Repeat from 1st try if the voice is different from the 1st try. 1 Selects a name.
Key Word Voice Registration 5 Say the phone category to register (1st try) Registers the voice to select the Phone number category by Voice Recognition. 1 Display the Hands Free Setup screen See (page 53). 2 Display the Key Word List screen Say within 2 seconds after the Beep. 6 Say the phone category to register (2nd try) Say within 2 seconds after the Beep.
Hands-Free Phoning Phone Number Preset 5 Register phone number Registers frequently used phone number to Hands Free control screen preset button. 1 Display the Hands-Free Control screen See (page 49). 2 Select the Preset number to register 1 sec. ⁄ • If no Preset number is registered, pressing this button momentarily moves to the step 3. 3 Select the search destination of the number to register [ ] Registers from SMS received message list. [ ] Registers from SMS sent message list.
SMS (Short Message Service) Uses SMS function. SMS Message screen 1 Display the Hands-Free Control screen See (page 49). 2 Display the SMS Select screen [ SMS] Creates a new message for the selected message. 3 Select a function [ ] Displays the SMS create menu screen. See . [ ] Displays received message list. [ ] Displays sent message list. [ ] Displays the SMS Create Menu screen. See .
Hands-Free Phoning Create a message 1 Enter phone number / Select contact [SET] Saves the message and returns to the Create SMS Menu screen. Only one draft message can be saved / retained in memory at any one time. 4 Send the message [ ] Select a contact from the phonebook. [Direct Number] Enter the phone number. [SET] Display the Create SMS Message screen. [Send] Sends the message. [Delete] Deletes the Draft message. Touching the screen displays a confirmation message. Touch [Yes].
Audio Control Audio Control Menu Audio Control Displays the Audio Control menu to set the sound effect function of this unit. You can adjust the front/rear and right/left audio balance. 1 Display the Source Select Screen 1 Display the Audio Control screen Touch [ ]>[ ] > [Audio Control]. (page 59) 2 Set each item SRC 1 2 Display the Audio Control menu 1 Adjusts the front/back and left/right balance of the volume by touching the Adjust screen. [2], [3] Adjusts the right and left volume balance.
Audio Control Equalizer Control Tone Setup You can set up the equalizer. You can set a Tone curve. 1 Display the Equalizer screen 1 Display the Equalizer screen Touch [ ]>[ ] > [Equalizer]. (page 59) 2 Set each item Touch [ ]>[ ] > [Equalizer]. (page 59) 2 Display the Tone Control screen 3 Set the Tone [SystemQ] Selects an equalizer curve type. You can select any of the following equalizer curves.
Zone Control You can set the front and rear audio source. 1 Display the Zone Control screen Touch [ ]>[ ] > [Zone Control]. (page 59) 2 Set the Zone Control [Single Zone] Sets the unit to single zone. [Dual Zone] Sets the unit to dual zone. [Front Source] Sets the front audio source. [Rear Source] Sets the rear audio source. ⁄ • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. [Rear VOL.
Setup Menu You can set up various receiver parameters. How to Display SETUP Menu Screen Displays the Setup menu to set various functions.
DivX Setup (DNX6460BT/DDX6046BT) Software Information Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management). Checks the software version of this unit. 1 Display the DivX Setup screen Touch [ ]>[ (page 62) 1 Display the Software Information screen Touch [ ]>[ ] > [Information] > [Software]. (page 62) ] > [Information] > [DivX]. Displays the software version. Displays the registration code.
Setup Menu User Interface Language Setting You can setup user interface parameters. You can select the display language for the control screen and audio file tags. 1 Display the User Interface screen Touch [ ]>[ ] > [System] > [User Interface]. (page 62) 2 Set each item 1 Display the User Interface screen Touch [ ]>[ ] > [System] > [User Interface]. (page 62) 2 Display the Language Setting screen 3 Select a language [Beep] Turns the key touch tone On or Off.
When [Select Mode] is set to "Advanced" (DNX series only) Clock Setup You can adjust the clock time. 1 Display the Clock Setup screen [Navigation Language Select] Selects the language used for navigation. ( "American English") Touch [ ]>[ (page 62) ] > [System] > [Clock]. 2 Setup the Clock 1 2 Touch Panel Adjustment You can adjust the touch panel operations. 1 Display the Touch panel Adjustment screen Touch [ ]>[ (page 62) ] > [System] > [Touch].
Setup Menu Security Indicator Setup Setup Memory Setting the security indicator to ON helps to protect your receiver system against theft. Audio Control, AV-IN SETUP, AV Interface, Navigation, and Audio SETUP settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the Security screen Touch [ ]>[ (page 62) ] > [System] > [Security].
4 Memorize or recall the settings When memorizing the Audio Setup and AV Interface settings: Entering Background Loads a image from the connected USB device and sets it for the background image. 1 Connect the device which has the image to load If settings have already been memorized, a confirmation message appears. Touch [Yes]. To cancel memorization, touch [No]. When recalling the memorized settings: 2 Display the Background screen Touch [ ]>[ ] > [Display] > [Background].
Setup Menu 6 Load the image Panel Color Coordinate Sets the button illumination color. 1 Display the Color screen 1 Touch [ ]>[ (page 62) ] > [Display] > [Color]. 2 Display the Panel Color Coordinate screen 1 Rotates the image. ⁄ • See (page 6) for readable image specifications. • The [Memory] button on the “Background” screen becomes active only in STANDBY source mode. • Pressing the [Memory] button on the “Background” screen switches the AV OUT source to OFF.
To register your original color Screen Adjustment 1 Start the RGB coordinate You can adjust the screen mode of the monitor. 1 Display the Screen Adjust screen 2 Adjust each color value Touch [ ]>[ Adjust]. (page 62) ] > [Display] > [Screen 2 Set each item 1 1 Selects a preset number to register. [Red Value] Adjusts the Red value. [Green Value] Adjusts the Green value. [Blue Value] Adjusts the Blue value. 3 Select a Preset number to register 2 sec.
Setup Menu Registering Bluetooth Unit 4 Select the Bluetooth unit to register Registers the Bluetooth unit to be connected. 1 1 Display the Bluetooth Setup screen Touch [ ]>[ (page 62) ] > [Bluetooth SETUP]. 2 Display the Connect Device List screen 1 Displays the searched Bluetooth unit. [Search] Searches for a Bluetooth unit. [Cancel] Cancels searching of Bluetooth unit. 5 Enter PIN code ⁄ 1 • [A2DP Connect Device] Only for DNX5160 and DDX516 with optional Bluetooth unit KCA-BT200 connected.
Registering Special Bluetooth Unit Registers Special Bluetooth unit, that resulted in error by normal registration method, by selecting from the listed models. Registering Bluetooth Unit PIN Code Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. 1 Display the Special Device List screen 1 Display the Bluetooth Setup screen Touch [ ]>[ (page 62) 2 Select a model name Displays the Bluetooth unit name that can be registered.
Setup Menu Bluetooth Unit Connection Selects the Bluetooth unit to connect. 1 Display the Bluetooth Setup screen Touch [ ]>[ (page 62) ] > [Bluetooth SETUP]. 2 Display the Connect Device List screen Bluetooth Hands-Free/Audio Output Setup Selects speakers to output the sound of handsfree phoning (such as phone call voice and ringing tone) and Bluetooth audio. 1 Display the Bluetooth Setup screen ]>[ Touch [ (page 62) ] > [Bluetooth SETUP].
AV Input Setup AV Interface Setup You can set AV input parameters. You can set audio and visual (AV) interface parameters. 1 Display the AV-IN Setup screen Touch [ ]>[ ] > [AV-IN SETUP]. (page 62) 2 Set each item 1 Display the AV Interface screen Touch [ ]>[ ] > [AV Interface]. (page 62) 2 Set each item [On Screen AV-IN] Sets an on-screen display of the AV-IN playback screen. ( "Auto") "Auto": Information is displayed for 5 seconds when updated.
Setup Menu Navigation Setup You can set Navigation parameters. 1 Display the Navigation Setup screen Touch [ ]>[ ] > [Navigation]. (page 62) [On Screen Navigation] Sets an on-screen display of the navigation screen. ( "OFF") (DDX series only) "Auto": Information is displayed for 5 seconds when updated. "OFF": Information is not displayed. 2 Set each item ⁄ • [On Screen Navigation] It can be set only when [Navigation Input] is set to "AVIN".
Speaker Setup You can select a speaker type and its size to get the best sound effects. Crossover Network Setup You can set a crossover frequency of speakers. 1 Select the speaker to set the crossover 1 Display the Speaker Select screen Touch [ ]>[ ] > [Audio SETUP] > [Speaker Select]. (page 62) 2 Select a speaker you wish to adjust When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically. 1 1 2 3 1 Sets the High Pass Filter of the front speaker.
Setup Menu DVD Setup You can set up the DVD play. 1 Display the DVD Setup screen Touch [ ]>[ ] > [DVD SETUP]. (page 62) 2 Set each item "4:3 PS": Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends). [Parental Level]* Displays the Parental Lock screen. ( "OFF") (See , page 77) [Disc SETUP] Makes the settings related to the disc media. (See , page 78) ⁄ • * Disabled when a DVD is being played.
DVD Language Setup DVD Parental Level Setup Selects a language you use for the speech and menus. Sets a parental level. 1 Display the DVD Setup screen Touch [ ]>[ ] > [DVD SETUP]. (page 62) 2 Select the language item to set 1 Display the DVD Setup screen ]>[ Touch [ ] > [DVD SETUP]. (page 62) 2 Display the Parental Level code number screen 3 Enter a language code See (page 92) and select the desired language. 3 Enter the code number 1 1 1 Enters a language code.
Setup Menu 5 Select a parental level and complete the setup Disc Setup Performs setup when using disc media. 1 Display the DVD Setup screen Touch [ ]>[ ] > [DVD SETUP]. (page 62) 2 Display the Disc Setup screen Selects a parental level. ⁄ • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc. • If a disc has no parental lock, anybody can play it back even when you have set the parental lock.
USB Setup iPod Setup Performs setup when using USB. Performs setup when using iPod. 1 Display the USB Setup screen 1 Display the iPod Setup screen Touch [ ]>[ ] > [USB SETUP]. (page 62) 2 Set each item [Picture Display Time] Selects a picture display time. ( "Long") The Display of a JPEG picture is changed. ("Short", "Middle", "Long") [On Screen USB] Sets an on-screen display of the USB Playback screen. ( "Auto") "Auto": Information is displayed for 5 seconds when updated.
Setup Menu SIRIUS Parental Code Setup 4 Enter the new code number Sets a SIRIUS Parental code. 1 Display the SIRIUS Setup screen ]>[ Touch [ 62) ] > [SIRIUS SETUP]. (page 2 Display the Parental Code screen 5 Confirm the code number Enter the same code number as you input in step 4. ⁄ • If you have already completed the code registration, [Change] is displayed. • If you want to clear the code which has already been registered, touch [Clear]. • Pressing [Clear] for 5 seconds or longer deletes the code.
SIRIUS Parental Lock Setup SIRIUS Parental Lock Channel Select Sets a SIRIUS Parental Lock function on or off. Selects the channel to enable SIRIUS Parental lock function. 1 Display the SIRIUS Setup screen Touch [ 62) ]>[ ] > [SIRIUS SETUP]. (page 2 Display the Parental Code screen 1 Display the SIRIUS Setup screen Touch [ 62) ]>[ ] > [SIRIUS SETUP]. (page 2 Display the Parental Code screen ⁄ • You need to complete beforehand.
Setup Menu 5 Set the parental lock for each channel 1 2 3 1 Channel list 2 Sets the Parental lock function on or off for each channel. You need to input the Parental code to switch the Parental lock function on or off. 3 Displays the sort sequence. [Info Change] Switch the sort sequence of the channel list. ("Channel", "Song title", "Artist", "Composer" and "Category") [ UP] Moves to SIRIUS Category Select Setup screen. 82 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160 B64-4602-00_02_K_En.
Remote Controller For DNX6960/ DNX6460BT : This unit can be operated using the Remote Controller (RC-DV331) supplied with this unit. For DDX6046BT : This unit can be operated using the Remote Controller (RC-DV340) supplied with this unit. For DNX6160/ DNX6020EX/ DNX5160/ DDX616/ DDX516 : Optional Remote Controller KNA-RCDV331/ KNA-RCDV340 is designed for controlling this unit. Refer to the instruction manual that comes with the remote controller.
Remote Controller Remote Controller mode switch Common operations (AUD mode) The functions operated from the remote controller differ depending on the position of the mode switch. [RC-DV331] [RC-DV331] [RC-DV340] Source switching Switches to the source to be played. [RC-DV340] DISP DISP V.
DVD/VCD (DVD mode) Cursor key Moves the cursor when displaying menu. [RC-DV331] O AUD• DVD• O O ENTER T V• O [RC-DV340] Track search and file search Selects the track or file to be played. O AM− FM+ OPEN O O AM− FM+ D Y OPEN VOL ENTER Enters options. 1 1 O AUD• DVD• O O ENTER T V• O FM+ Play/Pause Pauses the track. Press again to resume playing. OPEN Hands-free communication When a call comes in, it answers the call.
Remote Controller VCD 1.X, VCD 2.X (PBC OFF) SUBTITLE Switches the subtitle language. Track number Cancel DISP SRC VCD 2.X (PBC ON) Scene number Number Cancel V.SEL MODE FNC/PBC TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM ZOOM Switches the zoom ratio each time you press this key. Once you have switched to the direct search feature, specify the search number from the numeric keypad, and then press [ENTER] key.
Music CD/Audio file/Video file/ Picture file (AUD mode) Numeric keypad Y 1 2ABC 3 DEF 1 [RC-DV331] [RC-DV340] 2 ZONE 4 GHI 5JKL 6MNO R.VOL 7PQRS 8TUV 9WXYZ Folder search Selects the folder to be played. CLEAR 0 DIRECT ATT • Specify the number to search in direct search. O O AM− FM+ OPEN VOL D O Y 1 2ABC 3 DEF 1 2 ZONE Track search and file search Selects the track or file to be played.
Remote Controller iPod (AUD mode) Example: 92.1MHz (FM) 9WXYZ 2ABC 1 2ABC 9WXYZ « 1 [RC-DV331] « or [RC-DV340] Music/Video search Selects the music/video to be played. or Example: 810kHz (AM) O O 8TUV 1 0 1 8TUV « 0 or 1 1 D Y 1 O 2 ZONE Play/Pause Pauses the music/video. Press again to resume playing.
NAV (NAV mode) (RC-DV331 only) ROUTE M Displays Route Option menu. Cursor key Scrolls the map, or moves the cursor. VIEW Switches between 2D and 3D map displays. ENTER Performs the selected function. VOICE Plays Voice guidance. ZOOM Zooms in or out the navigation map. MENU Displays Main menu. MAP DIR Switches between the heading up navigation and north up navigation map displays. CANCEL Displays previous screen. POSITION Displays the current position.
Initial Setup When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is displayed. Initial Setup 1 Turn the power On 2 Set each item [Language] Select the language used for the control screen and setting items. (page 64) [iPod AV Interface Use] Sets the terminal to which the iPod is connected to. ( "iPod") [R-CAM Interrupt] Sets a method to switch to the rear view camera video display.
Status bar Indicator items Shown below is a list of indicators displayed on the Status bar. Source Display Overview General "ATT" "DUAL" "TEL" Indicates that the attenuator is active. Turns on the Dual zone function. Indicates the connection state of the Bluetooth hands-free unit. (Orange: Connected. White: Not connected.) DVD/CD "FO-REP" Indicates that the Folder repeat function is ON. MEDIA "IN" Indicates that a disc is inserted. (White: A Disc is inside the unit. Orange: Error at the disc player.
DVD Language Codes 92 Code Language Code Language Code Language aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gli gn gu ha he hi hr hu hy ia ie ik id Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter. • Cannot set up the high pass filter. ▲ Subwoofer is not set to On. ☞ (page 75) ▲ The Dual zone function is enabled. ☞ (page 61) ▲ The unit is set to STANDBY source. ! • Cannot select the output destination of the subsource in the Dual zone.
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. "Protect" : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. ➡ Wire or insulate the speaker cord as appropriate and then push the Reset button. "Hot Error" : When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit.
"Check SIRIUS" : The unit cannot recognize the connected SIRIUS Tuner Box. "Off Air" : The broadcast of the selected channel has finished. ➡ Check the connection of the SIRIUS Tuner Box. "Antenna Error" : Something is wrong with the anntena. ➡ Check the connection of the antenna. "Acquiring Signal" : The unit cannot receive any signal. ➡ Move the vehicle to the area where the unit can receive signal. "Updating Firmware" : Updating the firmware of SIRIUS tuner.
Specifications Monitor section USB interface section Picture Size : 6.1 inches (diagonal) wide : 136.2 mm (W) x 72 mm (H) Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 1,152,000 (800H x 480V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : LED USB Standard : USB 2.
FM tuner section Video section Frequency Range 200 kHz : 87.9 MHz – 107.9 MHz (DNX6960/ DNX6160/ DNX6020EX/ DNX5160/ DDX616/ DDX516) 50 kHz : 87.5 MHz – 108.0 MHz (DNX6460BT/ DDX6046BT) Usable Sensitivity (S/N : 30 dB) : 9.3 dBf (0.8 μV/ 75 Ω) Quieting Sensitivity (S/N : 50 dB) : 15.2 dBf (1.6 μV/ 75 Ω) Frequency Response (± 3.
Specifications Navigation section (DNX series) Receiver : High-sensitivity GPS receiver Reception Frequency : 1575.42 MHz (C/A code) Acquisition Times Cold : < 38 seconds Factory Reset : < 45 seconds (On average for a stationary receiver with a clear view of the sky) Accuracy Position : < 10 meters typical Velocity : 0.05 m/sec. RMS Position Method : GPS Antenna : External GPS antenna General Operating voltage : 14.4 V (10.
The "AAC" logo is a trademark of Dolby Laboratories. Font for this product is designed by Ricoh. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc. iTunes is a trademark of Apple Inc. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
DNX6960/DNX6160/DNX6020EX/DNX5160/DDX616/DDX516: 2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040.
