Operation Manual

Other External Components
59English
Other External Components
View Camera
NOTE
• To connect a camera, see P.81.
• To use a rear view camera, a REVERSE lead
connection is required. (P.80)
• The view of the front view camera or dashboard
camera varies depending on the setting of
[Dashboard Camera /Front Camera].
• If [R-CAM Interruption] is set to on, the camera
screen is displayed when you shift the gear to the
reverse (R) position.
Ñ Display the camera screen
1
Press the [MENU] button.
 Popup menu appears.
2
Touch [Camera].
 View camera screen appears.
3
Adjust each item as follows.
2
3
4
1
1
Switching the View Camera
Touch to change the front view camera
[1]
or
dashboard camera
[2]
and rear view camera.
2
Camera off
Touch to exit the camera screen.
3
Switching the Guideline
Touching each time turns on or off the
guideline. Available when [Rear Camera] is
set to [CMOS 3-Series Camera].
4
Switching the Angle
Touching each time changes camera angles:
Available when [Dashboard Camera /
Front Camera] is set to [CMOS 3-Series
Camera].
•
[1]
Only for
•
[2]
Only for
Ñ Camera Setup
1
Press the [MENU] button.
 Popup menu appears.
2
Touch [SETUP].
 SETUP Menu screen appears.
3
Touch [Camera].
 Camera screen appears.
4
Set each item as follows.
■ Rear Camera (
)
CMOS 3-Series Camera: Select this when
the CMOS-3xx series with ID 1 set is
connected.
Other (Default): Select this when the other
camera is connected.
■ R-CAM Interruption
ON: Displays the picture from the rear view
camera when you shift the gear to the
reverse (R) position.
OFF (Default): Select this when no camera is
connected.
■ R-CAM for Car interface
ON: Select when you connected an external
system unit. Neither buttons nor titles are
displayed.
OFF (Default): Select when you connected a
rear camera.