DNX9180DABS DNX8180DABS DNX518VDABS DNX5180DABS DNX5180BTS DNX4180BTS GPS NAVIGATION SYSTEM INSTRUCTION MANUAL © 2018 JVC KENWOOD Corporation IM394_Nav_E_En_00
© 2018 JVC KENWOOD Corporation All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
conduct and acceptable content, including laws regulating the export of data to the United States or your country of residence. No Warranty. The Navigation Provider Products are provided to you "as is," and you agree to use them at your own risk.
Map Data. Use of the Map Data is subject to certain restrictions and/or requirements imposed by third party suppliers and/or governmental or regulatory authorities, and in the case of HERE Data, as further set forth at http://corporate.navteq.com/supplier _terms.html. Term.
Table of Contents Getting Started................................ 1 Navigation System ................................... 1 Status Bar Icons ...................................... 1 Using the On-Screen Buttons .................. 1 Removing a Shortcut ............................... 1 Adding a Shortcut .................................... 1 Using Multi-touch Controls ...................... 1 Updating the Software ............................. 1 Updating Map Data ..................................
Saving Trip Logs ............................... 10 Viewing Previous Routes and Destinations ........................................... 10 Viewing the Weather Forecast .............. 10 Viewing Weather Near a Different City .................................................... 10 Viewing Road Weather .......................... 10 Finding Fuel Stations and Prices ........... 11 Dynamic Parking ................................... 11 About Traffic.................................
Getting Started WARNING See the Safety Precautions and Important Information in the KENWOOD system instruction manual for product warnings and other important information. NOTE: The screenshots shown in this manual may not exactly match the screens on your navigation system. The images used in this manual are intended for reference only. Navigation System For complete audio system information, see the KENWOOD system instruction manual. À Opens the navigation system when selected.
hotels, and auto services. You can use categories to browse for nearby businesses and attractions. Finding a Location by Category 1 Select Where To?. 2 Select a category, or select Categories. 3 If necessary, select a subcategory. 4 Select a location. Searching Within a Category To narrow your search results, you can search within some categories. 1 Select Where To?. 2 Select a category, or select Categories. 3 If necessary, select a subcategory.
1 Select Where To? > Categories > Intersections. Follow the on-screen instructions to enter 2 street information. 3 Select the intersection. Finding a City 1 Select Where To? > Categories > Cities. 2 Select an option: • Select a city from the list of nearby cities. • To search near another location, select Searching near: (Changing the Search Area). • To search for a city by name, select Enter Search, enter a city name, and select .
Finding Parking 1 Select Where To? > Categories > Parking. 2 Select a parking location. Setting a Simulated Location If you are indoors or not receiving satellite signals, you can use the GPS to set a simulated location. 1 Select Settings > Navigation > GPS Simulator. From the main menu, select View Map. 2 3 Tap the map twice to select an area. The address of the location appears at the bottom of the screen. 4 Select the location description. 5 Select Set Location.
Your Route on the Map NOTICE The speed limit feature is for information only and does not replace your responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin and JVC KENWOOD will not be responsible for any traffic fines or citations you receive for failing to follow all applicable traffic laws and signs. The route is marked with a magenta line. A checkered flag marks your destination.
Avoiding Road Features 1 Select Settings > Navigation > Avoidances. 2 Select the road features to avoid on your routes, and select Save. About Custom Avoidances Custom avoidances allow you to avoid specific areas and sections of road. You can enable and disable custom avoidances as needed. Avoiding an Area 1 Select Settings > Navigation > Custom 2 3 4 5 6 Avoidances. If necessary, select Add Avoidance. Select Add Avoid Area. Select the upper-left corner of the area to avoid, and select Next.
3 Copy the custom POI files to the Garmin folder on the USB mass storage device. Connect the USB mass storage device to 4 your KENWOOD system. 5 On the KENWOOD system screen, select Yes. 6 Select Custom POIs. 7 Select Install. The KENWOOD system imports the custom points of interest into the system storage. Using the POI Loader Help Files For more information on the POI loader, refer to the Help file. With the POI loader open, click Help. Finding Extras 1 Select Where To? > Categories > Custom POIs.
Viewing the Next Turn While navigating a route, a preview of the next turn, lane change, or other maneuver appears in the upper-left corner of the map. The preview includes the distance to the turn or maneuver and the lane in which you should be traveling, if available. From the map, select to view the next turn on the map. Viewing Traffic Alerts While navigating a route, a traffic alert may appear in the navigation bar. Select the alert to view more information.
specific vehicle and driving habits. You should calibrate when you fill up your fuel tank. 1 Select Apps > ecoRoute™ > At the Pump. 2 Enter the current fuel price. 3 Enter the amount of fuel the vehicle has used since the last time the fuel tank was filled. 4 Enter the distance you have traveled since the last time the fuel tank was filled. 5 Select Next. The device calculates the average vehicle fuel economy. 6 Select Save. Changing the Fuel Price 1 Select Apps > ecoRoute™ > At the Pump.
Scheduling a Trip You can add scheduling information to each location in your trip, including the desired arrival time and layover duration at each location. This can help you plan your departure to reach locations in your trip on time. 1 Select Apps > Trip Planner. 2 Select a trip. 3 Select a location. 4 Select Departure Time or Arrival Time. 5 Select a date and time, and select Save. 6 Select Duration. 7 Select the amount of time you intend to spend at the location, and select Save.
Finding Fuel Stations and Prices Traffic Data Using INRIX Traffic Service Before you can use this feature, your device must be connected using Bluetooth to access connected services. You can find nearby fuel stations and compare fuel prices. 1 Select Apps > Fuel Prices. 2 If necessary, select > Fuel Type, select a fuel type, and select Save. 3 Select a fuel station. You can purchase a traffic subscription to receive traffic data using INRIX traffic service.
3 Select an event. Manually Avoiding Traffic on Your Route 1 From the map, select . 2 Select Traffic On Route. 3 If necessary, use the arrows to view other traffic delays on your route. > Avoid. 4 Select Taking an Alternate Route 1 While navigating an automobile route, select . 2 Select Alternate Route. 3 Select a route. Viewing Traffic on the Map The traffic map shows color-coded traffic flow and delays on nearby roads. 1 From the map, select . 2 Select Traffic Conditions.
Safe Mode: Disables all functions that require significant operator attention and could become a distraction while driving. Voice Prompts: Enables voice prompts. GPS Simulator: Stops the device from receiving a GPS signal. Changing the Route Calculation Mode 1 Select Settings > Navigation > Calculation Mode. 2 Select an option: • Select Faster Time to calculate routes that are faster to drive but can be longer in distance.
Destinations), and Trip Log (Viewing the Trip Log) features. Clear Travel History: Clears your travel history from the navigation system. Update Maps: Exports data from the navigation unit for map and software updates and traffic subscriptions (Updating Map Data). Proximity Alerts Settings NOTE: You must have custom points of interest (POIs) loaded for proximity points alerts to display. NOTE: This feature is not available in all areas. Select Settings > Proximity Alerts.
To download free navigation software updates and purchase updated maps for your product, go to www.garmin.com/kenwood.
