DNX8160DABS DNX716WDABS DNX5160DABS DNX516DABS DNX5160BTS DNX3160BT GPS NAVIGATION SYSTEM INSTRUCTION MANUAL Before reading this manual, click the button below to check the latest edition and the modified pages. http://manual.kenwood.
What Do You Want To Do? What Do You Want To Do? Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM. In this manual, you will learn various convenient functions of the system. Click the icon of the media you want to play.
Contents Contents Before Use 4 Radio 52 # WARNING________________________ 4 Radio Basic Operation________________ 52 How to Read this Manual 5 Digital Radio Basic Operation__________ 54 Basic Operations 6 Memory Operation___________________ 56 Selecting Operation__________________ 57 Functions of the Buttons on the Front Panel___________________ 6 Traffic Information (FM Tuner and Digital Radio only)_______ 58 Turning on the Unit__________________ 14 Replay (Digital Radio only)_____________
Contents Controlling Audio 88 Speaker/ X’over setup_________________ 88 Controlling General Audio_____________ 91 Equalizer Control____________________ 92 Volume Offset_______________________ 93 Zone Control________________________ 94 Sound Effect________________________ 95 Listening Position/ DTA_______________ 96 Remote control 100 Battery Installation___________________ 100 Functions of the Remote control Buttons_ 101 Troubleshooting 104 Problems and Solutions_______________ 104 Error Messages__
Before Use Before Use # WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. • If you experience problems during installation, consult your KENWOOD dealer.
How to Read this Manual How to Read this Manual CD/Audio and Visual Files/iPod/APPS Search Operation You can search music or video files by the following operations. NOTE • If you use a remote control, you can jump directly to the desired track/file with entering the track/ folder/file number, play time, etc. For details, see Direct search mode (P.101). List search You can search tracks, folders, and files according to hierarchy. 1 2 3 4 5 Touch [1]. Category List screen appears. Touch [ S ].
Basic Operations Basic Operations Functions of the Buttons on the Front Panel DNX8160DABS 8 9 1 2 3 4 5 6 7 NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels. • In this manual, each model name is abbreviated as follows. DNX8160DABS: If above icon is showed, read the article applicable to the unit you use. How to insert an SD Card 1) Press 7 button.
Basic Operations Number 1 s Name Motion • This indicator flashes when the vehicle ignition is off (P.82). 2 S, R (Volume) • Adjusts volume. The volume will go up until 15 when you keep pressing [ R ]. 3 NAV • Displays the navigation screen. 4 MENU • Displays the popup menu screen. 5 HOME • Displays the HOME screen (P.22). • Pressing for 1 second turns the screen off. • Pressing for 1 second turns the power off. • When the power off, turns the power on.
Basic Operations DNX716WDABS 1 2 7 8 3 4 5 6 NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels. • In this manual, each model name is abbreviated as follows. DNX716WDABS: If above icon is showed, read the article applicable to the unit you use. How to insert an SD Card 1) Press 7 button. 2) Touch [OPEN] to the panel fully opens.
Basic Operations Number Name NAV • Displays the navigation screen. 2 S, R (Volume) • Adjusts volume. The volume will go up until 15 when you keep pressing [ R ]. 3 HOME • Displays the HOME screen (P.22). 1 Motion • Pressing for 1 second turns the power off. • When the power off, turns the power on. 4 MENU • Pressing for 1 second turns the screen off. • Displays the APP (CarPlay/ Android Auto/ Mirroring) screen. 5 6 • Displays the popup menu screen.
Basic Operations DNX5160DABS/DNX5160BTS/DNX3160BT 3 2 1 4 5 6 7 8 NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels. • In this manual, each model name is abbreviated as follows. DNX516DABS, DNX5160BTS: DNX3160BT: If above icons are showed, read the article applicable to the unit you use. How to insert a microSD Card NOTE • A dummy microSD card is inserted as the slot cover.
Basic Operations Number Name Disc insert slot • A slot to insert a disc media. 2 G (Eject) • Ejects the disc. 3 s • This indicator flashes when the vehicle ignition is off (P.82). 4 HOME • Displays the HOME screen (P.22). 1 Motion • To forcibly eject the disc, press it for 2 seconds and touch [Yes] after the message is displayed. • Pressing for 1 second turns the power off. • When the power off, turns the power on. 5 NAV • Displays the APP (CarPlay) screen.
Basic Operations DNX516DABS 3 2 1 4 14 5 13 12 6 11 7 10 8 9 NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels. • In this manual, each model name is abbreviated as follows. DNX516DABS: If above icons are showed, read the article applicable to the unit you use. How to insert a microSD Card 1) Open the 9 microSD card slot cover as the illustration in the right.
Basic Operations Number Name Motion • This indicator flashes when the vehicle ignition is off (P.82). 1 s 2 Disc insert slot • A slot to insert a disc media. 3 G (Eject) • Ejects the disc. 4 HOME • To forcibly eject the disc, press it for 2 seconds and touch [Yes] after the message is displayed. • Displays the HOME screen (P.22). • Pressing for 1 second turns the power off. • When the power off, turns the power on. 5 NAV • Displays the navigation screen.
Basic Operations Turning on the Unit The method of turning on is different depending on the model. 1 Press the button. DNX8160DABS DNX716WDABS DNX5160DABS/ DNX5160BTS/ DNX3160BT DNX516DABS The unit is turned on. ●● To turn off the unit: Press the button for 1 second. If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup (P.15).
Basic Operations Initial setup Perform this setup when you use this unit first time. 1 Set each item as follows. Locale Select the country for the navigation system. The language, the distance unit, and the gasoline unit are set. 1 Touch [Locale]. 2 Select the desired country. Language Select the language used for the control screen and setting items. Default is “British English(en)”. 1 Touch [Language]. 2 Touch [Language Select]. 3 Select the desired language. 4 Touch [ ].
Basic Operations 2 Touch [Finish]. NOTE • These settings can be set from the SETUP menu. See Setting Up (P.76).
Basic Operations How to Play Media Music CD and disc media 1 2 3 1 Insert the disc into the slot. Press the button. Touch [DISC EJECT]. The panel opens. Insert the disc into the slot. The unit loads the disc and playback starts. ●● To eject the disc: Press the button. The panel closes automatically. The unit loads the disc and playback starts. ●● To eject the disc: 1 Press the button. 2 3 Touch [DISC EJECT]. When removing a disc, pull it horizontally. Press the button.
Basic Operations USB device 1 Connect the USB device with the USB cable. 2 3 Press the button. Touch [USB]. (P.22) ●● To disconnect the device: 1 Press the button. 2 3 SD card 1 Press the button. 2 Touch [OPEN] to the panel fully opens. 3 Insert the SD card into the slot until it clicks. 4 5 6 Press the button. Touch a source other than [USB]. Detach the USB device. iPod 1 2 3 Connect the iPod. Press the button. Touch [iPod]. (P.
Basic Operations 1 HDMI/ MHL source Insert the microSD card into the slot until it clicks. You can display the screen of smartphones connected via the HDMI/MHL input terminal. 1 2 3 4 Press the button. Touch [ ]. Touch [HDMI/ MHL]. (P.22) Start an application or playback on your smartphone. ●● About Wireless Display Adapter: This unit is compatible with Wireless Display Adapter.
Basic Operations TV tuner ( ) Menu control screen: 1) Touch 1 Key display area. You can connect the TV tuner (commercially available) with this unit and watch TV. Before use • When you use TV control function, connect the TV tuner (commercially available) and set 3rd Party TV Tuner Control in AV Setup (P.87) to ON. • The TV tuner can be controlled with its supplied remote control through the remote sensor on the front panel of this unit. 1 2 3 Press the button. Touch [ ]. Touch [AV-IN1]. (P.
Basic Operations Detaching The Front Panel You can detach the front panel to prevent theft. DNX8160DABS 1 Press the <0> button. 2 ●● Attaching the front panel: Hold the panel securely so as not to drop it accidentally, and fit it onto the attaching plate until it is firmly locked. 1 1 Touch [OPEN] to the panel fully opens. 2 DNX516DABS 1 Slide the Release key rightward to detach the part of the front panel. 0 NOTE • You can set the front panel to open automatically when the ignition is turned off.
Basic Operations Operating with the HOME Screen Most functions can be performed from the HOME screen. 1 Press the button. DNX8160DABS DNX5160DABS/ DNX5160BTS/ DNX3160BT DNX716WDABS DNX516DABS 2 HOME screen appears. Flick the screen left or right to select the widget. Touch the widget to display the detailed screen. Selecting the playback source on the HOME screen 4 1 22 2 3 1 Displays the source selection screen. 2 Short-cut buttons. 3 Displays the Hands Free screen (P.70).
Basic Operations 1 Touch [ ]. From this screen, you can perform the following functions. Function Switch the audio source Icon Operation Touch the icon of the desired source. etc. Touch the icon of the desired video source. Switch the video source etc. Switch the application installed in the iPhone/ iPod or Android. Touch the icon of the desired application. etc. Display navigation screen Touch [NAV]. Turn off all audio function Touch [STANDBY].
Basic Operations Common Operations Introduces the common operations. Popup menu 1 Press the
Basic Operations 4 Secondary screen [<] [>] : The Secondary screen changes every time you touch it. • Indicators: Displays the current source condition and so on. • Navigation information: Displays the current location and the direction. The screen changes to the navigation screen when you touch here. • Short-cut buttons: The source changes to the one you have set as a short-cut. For the short-cut setting, refer to Customizing Short-cut buttons on HOME screen (P.23).
Basic Operations Navigation Operation For details on the navigation function, please refer to the Navigation Instruction Manual. Display the navigation screen 1 Press the
Basic Operations KENWOOD Traffic Powered By INRIX You can receive INRIX traffic information and weather forecast by connecting your iPhone or Android smartphone in which the “KENWOOD Traffic Powered By INRIX” application is installed to this unit. Preparation Displays the navigation and current video/ picture playback display. • Install the latest version of the KENWOOD Traffic Powered By INRIX application on your iPhone or Android.
DVD/Video CD (VCD) DVD/Video CD (VCD) DVD/VCD Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE • Set the remote control mode switch to DVD mode before starting operation, see Switching the operation mode (P.101). • The screen shot below is for DVD. It may be different from the one for VCD. 1 When the operation buttons are not displayed on the screen, touch the 6 area.
DVD/Video CD (VCD) 5 Searching area Touch to search the next/previous content. 6 Key display area Touch to display the control screen. NOTE • The control screen disappears when no operation is done for 5 seconds. • If you use a remote control, you can jump directly to the desired image with entering the chapter number, scene number, play time, etc (P.101). Function bar DVD VCD The functions of each key are as follows. [E] [F] Searches the previous/next content.
DVD/Video CD (VCD) Function panel 1 Touch on the left side of the screen. DVD VCD The functions of each key are as follows. [I] Stops playback. When touched twice, the disc is played from the beginning when you play it the next time. [<<] [>>] Fast forward or fast backward. Each time you touch the key, the speed changes; 2 times, 8 times. [<|] or [|>] (DVD only) Plays in slow motion forward or backward. [SETUP] (DVD only) Touch to display the DVD SETUP screen. See DVD Setup (P.32).
DVD/Video CD (VCD) DVD Disc Menu Operation You can set up some items in the DVD-VIDEO disc menu. 1 Touch illustrated area during playback. Enters selected item Touch [Enter]. Enables direct operation Touch [Highlight] to enter the highlight control mode (P.31). Moves the cursor Touch [R], [S], [C], [D]. Switches the subtitle language Touch [Subtitle]. Each time you touch this key, language is switched. Switches the audio language Touch [Audio]. Each time you touch this key, language is switched.
DVD/Video CD (VCD) DVD Setup You can set up the DVD playback functions. NOTE • Each operation in this section can be started from the HOME screen. For details, see Operating with the HOME Screen (P.22). • Some setup items can only be set in standby mode. 1 Touch on the left side of the screen. Touch [SETUP]. DVD SETUP screen appears. 2 Set each item as follows. Menu/Subtitle/Audio Language See Language setup (P.33). Dynamic Range Control Sets the dynamic range. Wide: The dynamic range is wide.
DVD/Video CD (VCD) Language setup This setting is for the language used in the menu, subtitle, and voice. 1 2 Touch the desired item; [Menu Language], [Subtitle Language], [Audio Language]. Language Set screen appears. Select a language. For language code, refer to DVD Language Codes (P.115). Sets the entered language and returns to the DVD Setting screen. NOTE • To set the DVD’s original language for audio language, touch [Original].
CD/Audio and Visual Files/iPod/APPS CD/Audio and Visual Files/iPod/APPS See the following sections for each source operation. • Music CD (P.36) • Spotify (P.44) • Disc media (P.37) • Mirroring (P.46) • USB device (P.37) • Apple CarPlay (P.48) • iPod (P.37) • Android Auto (P.
CD/Audio and Visual Files/iPod/APPS APP/iPod settings 5 Touch [APP/iPod SETUP]. Select how to connect your android smartphone or iPhone to use apps like Mirroring, etc. Preparation • To connect an Android device or iPhone via Bluetooth, register it as the Bluetooth device and do the profile setting of the connection beforehand. See Registering from the Bluetooth unit (P.65) and Connecting the Bluetooth unit (P.66). 1 2 3 Press the
CD/Audio and Visual Files/iPod/APPS Music/Video Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE • Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation mode (P.101). • In this manual, “Music CD” will be referred to as the general CDs which include music tracks in. “Disc media” will be referred to as CD/DVD disc which includes audio, picture or video files. • The screen shot below is for CD.
CD/Audio and Visual Files/iPod/APPS Disc media, USB device, SD card, and iPod To enter USB/ SD/ iPod source, touch [USB], [SD] or [iPod] icon in the HOME screen. NOTE • SD card is for , , and only. • The screen shot below is for USB device. It may be different from the one for iPod. 2 Control screen Content list panel 1 4 7 3 5 6 1 [ ]/[ ] •[ ] : Repeats the current track/folder.
CD/Audio and Visual Files/iPod/APPS 7 Content list panel Displays the playing list. When you touch a track/file name on the list, playback will start. Picture/video screen 8 8 9 8 Searching file area (picture/video file only) Touch to search the next/previous file. 9 Key display area (picture/video file only) Touch to display the control screen. Function bar Music CD Disc media iPod USB device and SD card The following functions can be performed by using keys in this area.
CD/Audio and Visual Files/iPod/APPS Function panel 1 Touch on the left side of the screen. Disc media and SD card USB device The following functions can be performed by using keys in this area. [ ] [ ] (disc media, USB device, and SD card only) Searches previous/next folder. [USB DEVICE CHANGE] (Only for USB device of / / ) Switches to another USB device when two USB devices are connected.
CD/Audio and Visual Files/iPod/APPS Search Operation You can search music or video files by the following operations. NOTE • If you use a remote control, you can jump directly to the desired track/file with entering the track/ folder/file number, play time, etc. For details, see Direct search mode (P.101). Category search (USB device, iPod, and SD card only) You can search a file by selecting category. 1 Touch [1]. Category List screen appears. 2 Touch [ S ]. 3 Touch [Category List].
CD/Audio and Visual Files/iPod/APPS Link search (USB device, iPod, and SD card only) You can search a file of same artist/album/ genre/composer as the current track. 1 • Touch [A-Z] to narrow the search you can select a letter. • For operations in the list screen, see List screen (P.25). Touch [1]. Category List screen appears. 2 Touch [ S ]. 3 Touch [Link Search]. 4 NOTE Touch the desired item. You can select from artist, album, genre and composer.
CD/Audio and Visual Files/iPod/APPS Folder search (USB device, disc media, and SD card only) You can search a file according to hierarchy. 1 Touch [1]. Category List screen appears. 2 Touch [ S ]. 3 Touch [Folder List]. 4 Touch the desired folder. When you touch a folder its contents are displayed. 5 Touch desired item from the content list. Playback starts. NOTE • For operations in the list screen, see List screen (P.25).
CD/Audio and Visual Files/iPod/APPS 43
CD/Audio and Visual Files/iPod/APPS Spotify Operation You can listen to the Spotify on this unit by controlling the application installed in the iPhone or Android. To enter Spotify source, touch [Spotify] icon in the HOME screen. Preparation • Install the latest version of the Spotify application "Spotify" on your iPhone or Android. iPhone: Search for "Spotify" in the Apple App Store to find and install the most current version.
CD/Audio and Visual Files/iPod/APPS Selecting a track Function bar 1 The following functions can be performed by using keys in this area. 2 [ ] Displays the Menu screen Touch [ ]. Menu screen appears. Select the list type, then select a desired item. [ ] New radio station that relates to the artist of the currently playing song is selected and playback starts. [ ][ ] Skips the current song. [ ][ ] Plays or pauses the content of the current station. [ ] Saves currently playing song to My Music.
CD/Audio and Visual Files/iPod/APPS Mirroring Operation ( ) 5 Touch [APP/iPod SETUP]. You can listen to music or watch video from the Mirroring operating on Android. Preparation • Install the latest version of the KENWOOD Smartphone Control application on your Android. Search for “KENWOOD Smartphone Control” in Google play to find and install the most current version. For details, see web site. http://www.kenwood.
CD/Audio and Visual Files/iPod/APPS Operation 1 2 3 4 Press the button. Touch [ ]. Touch [Mirroring]. NOTE • Smartphone control from this unit is limited to a single finger operation like Tap/ Double Tap/ Long Tap/ Swipe. • Operation that requires two or more fingers such as Pinch-in/ Pinch-out/ Multi-tap are unavailable. Touch [Agree]. KENWOOD Music Control for Android Preparation If you drive using an app that is prohibited from using while driving, the confirmation screen appears.
CD/Audio and Visual Files/iPod/APPS Apple CarPlay Operation CarPlay is a smarter, safer way to use your iPhone in the car. CarPlay takes the things you want to do with iPhone while driving and displays them on the screen of the product. You can get directions, make calls, send and receive messages, and listen to the music from iPhone while driving. You can also use Siri voice control to make it easier to operate iPhone. For details about CarPlay, visit https://ssl. apple.com/ios/carplay/.
CD/Audio and Visual Files/iPod/APPS Operation buttons and available Apps on the home screen of CarPlay You can use the Apps of the connected iPhone. The items displayed and the language used on the screen differ among the connected devices. To enter CarPlay mode, touch [Apple CarPlay] icon in the HOME screen. Using Siri You can activate Siri. 1 Press the < > button for 1 second.
CD/Audio and Visual Files/iPod/APPS Android Auto™ Operation ( DNX516DABS) Android Auto enables you to use functions of your Android device convenient for driving. You can easily access route guidance, make calls, listen to music, and access convenient functions on the Android device while driving. For details about Android Auto, visit https:// www.android.com/auto/ and https://support. google.com/androidauto. Preparation 1 2 3 4 Press the
CD/Audio and Visual Files/iPod/APPS Operation buttons and available Apps on the Android Auto screen Using voice control 1 Press the < You can perform the operations of the Apps of the connected Android device. The items displayed on the screen differ among the connected Android devices. To enter Android Auto mode, touch [Android Auto] icon in the HOME screen. > button for 1 second.
Radio Radio Radio Basic Operation Most functions can be controlled from the source control screen. To enter Radio source, touch [Radio] icon in the HOME screen. NOTE • Set the remote control mode switch to AUD mode before starting operation, see Switching the operation mode (P.101). Control screen 1 2 Preset list screen 5 7 3 4 6 1 Information display Displays the information of the current station: Frequency Touching [ ] allows you to switch between Content A and Content B.
Radio 7 Preset list Recalls the memorized station. When touched for 2 seconds, stores the current receiving station in memory. Function panel 1 Touch on the left side of the screen. The functions of each key are as follows. [TI] (FM Tuner only) Sets the traffic information mode on. For details, see Traffic Information (P.58). [SETUP] Touch to display the Radio SETUP screen. For details, see Radio Setup (P.60). [AME] Presets stations automatically. For details, see Auto memory (P.56).
Radio Digital Radio Basic Operation (DNX8160DABS, DNX716WDABS, DNX5160DABS, DNX516DABS only) Most functions can be controlled from the source control screen. To enter Radio source, touch [DAB] icon in the HOME screen. NOTE • Set the remote control mode switch to AUD mode before starting operation, see Switching the operation mode (P.101). 2 3 Control screen Preset list screen 1 6 8 4 5 7 1 Indicator display Displays the received signal strength.
Radio 7 Artwork area The picture data is displayed if available from current content. Touch to switch between the Control and Information screen. 8 Preset list Recalls the memorized service. When touched for 2 seconds, stores the current service in memory. Function panel 1 Touch on the left side of the screen. The functions of each key are as follows. [TI] Sets the traffic information mode on. For details, see Traffic Information (P.58). [SETUP] Displays the DAB SETUP screen.
Radio Memory Operation Auto memory You can store stations with good reception in memory automatically. This function is for radio only. 1 2 3 Touch desired band key. Touch on the left side of the screen. Touch [AME]. Touch [Yes]. Auto memory starts. 56 Manual memory You can store the current receiving station or service in memory. 1 2 Select a station or service you wish to store in memory.
Radio Selecting Operation Preset select You can list and select memorized station or service. Search by program type You can tune to a station with a specific program type when listening to FM/ Digital Radio. 1 Selecting from the preset list 1 Touch on the left side of the screen. Touch [PTY]. Touch on the right side of the screen. PTY Search screen appears. List Control screen appears. 2 Select a station or service from the list. 2 3 Select a program type from the list. Touch [Search].
Radio Service search (Digital Radio only) You can select a service from a list of all services received. 1 Touch [1]. Traffic Information (FM Tuner and Digital Radio only) You can listen and watch the traffic information automatically when a traffic bulletin starts. However, this feature requires a Radio Data System and Digital Radio that includes the TI information. 1 Touch on the left side of the screen. Touch [TI]. Service List appears. 2 Select the desired content from the list.
Radio Replay (Digital Radio only) You can replay last 30 minutes of current station. 1 Touch on the left side of the screen. Touch [Instant Replay]. NOTE • PTY Watch starts operating and Replay function cannot be used while receiving a program. • While replaying the current station, you can not store the station by Manual memory (P.56). [4] [¢] Forward/backward 15 seconds when touch it. [38] Plays or pauses. [1] [¡] Fast forward/fast backward when keep on touching.
Radio Radio Setup You can set tuner related parameters. 1 2 Touch on the left side of the screen. Touch [SETUP]. Radio SETUP screen appears. Set each item as follows. NEWS Sets a news bulletin interrupt time. Default is “OFF”. AF When station reception is poor, automatically switches to the station that is broadcasting the same program over the same Radio Data System network. Default is “ON”. Regional Sets whether to switch to the station only in the specific region using the “AF” control.
Radio Digital Radio Setup You can set Digital Radio related parameters. 1 2 Touch on the left side of the screen. Touch [SETUP]. Digital Radio SETUP screen appears. Antenna Power* Sets power supply to the Digital Radio antenna. Set to “ON” when the Digital Radio antenna in use is equipped with a booster. Default is “ON”. L-Band Tuning Sets L-band reception. When set to “ON”, also receives L-band ensembles.
Radio Announcement setup When the service for which ON is selected starts, switches from any source to Announcement to receive it. 1 2 Touch [Announcement Select] in the DAB SETUP screen. The Announcement Select screen appears. Touch each Announcement list and set on or off. NOTE • The volume setting during reception of Announcement service is automatically stored. The next time the Announcement service is received, this unit recalls the volume setting automatically.
Radio 63
Bluetooth Control Bluetooth Control Using the Bluetooth function, various functions can be used: listening to the audio file, making/receiving a call. About the cell-phone and Bluetooth audio player This unit conforms to the following Bluetooth specifications: Version Bluetooth Ver. 3.0 Profile Cell-phone: HFP (V1.
Bluetooth Control Registering from the Bluetooth unit Follow the step 1, 2 and 3 for registration. Step 1: Registration from the Bluetooth device 1 2 Search the unit (“DNX****”) from your smartphone/cell-phone. Input the PIN code in your smartphone/ cell-phone. PIN code is set to “0000” as the default. NOTE • A new device cannot be registered if there are 10 registered Bluetooth units. Delete unnecessary registration. See Connecting the Bluetooth unit (P.66).
Bluetooth Control Step 3: Phonebook transfer 1 Select if you want to transfer your phonebook data. This message appears if the device supports PBAP. Connecting the Bluetooth unit 1 2 The phonebook data transmission starts. Some smartphones may request permission to access the data. The data transmission will start with your permission. Touch [Select Device] in the Bluetooth SETUP screen. Touch the device name you want to connect.
Bluetooth Control Audio (A2DP)/App (SPP) The device is connected with the unit as an audio player or as a smartphone with apps installed. 4 Touch [Close]. Change the PIN code 1 Touch [PIN Code] in the Bluetooth SETUP screen. PIN Code Set screen appears. 2 Input the PIN code 3 Touch [SET]. NOTE • If a device has been paired, the Bluetooth unit cannot be connected from the paired device. Deleting the registered Bluetooth unit 1 Touch [Delete].
Bluetooth Control Playing Bluetooth Audio Device Bluetooth basic operation 5 Control screen 2 4 3 1 Device name/ [ ]/[ • Connected device name. Function panel 1 6 ] •[ ] : Repeats the current track/folder. Each time you touch the key, repeat mode switches in the following sequence; File repeat ( ), Folder repeat ( ), All songs repeat ( ), Repeat off ) ( •[ ] : Randomly plays all tracks in current folder.
Bluetooth Control Function panel 1 2 Touch the device name you want to connect. Touch on the left side of the screen. The following functions can be performed by using keys in this area. [BT DEVICE CHANGE] Selects the device to connect via Bluetooth audio (A2DP) or APP (SPP). See Connecting the Bluetooth audio (P.69). 3 Touch [Close]. Folder search 1 2 Touch [1]. Touch the desired file or folder.
Bluetooth Control Using Hands-Free Unit 2 Select a dialing method. You can use telephone function by connecting the Bluetooth telephone to this unit. Making a call 1 Touch [Û]. •[ ]: Call by entering a phone number •[ ]: Call using call records •[ ]: Call using the phonebook •[ ]: Call using the preset number •[ ]: Voice Recognition (P.73) Select the cell-phone to use When you connect two cell-phones 1 Touch [ ] to select the phone you want to use. Bluetooth SETUP 1 Touch [ ].
Bluetooth Control Call using call records 1 2 Touch [ ]. Select the phone number from the list. Call using the phonebook 1 2 3 Touch [ ]. Touch [ Touch [ Select the initial. Select the person you want to call from the list. ]. Call using the preset number 1 2 ]. • During search, a non-accent character such as “u” is searched for instead of an accent character such as “ü”. Enter a phone number with number keys. 4 3 Touch [ ]. • Characters with no corresponding name will not appear.
Bluetooth Control Receiving a call 1 Touch [ ] to answer a phone call or [ ] to reject an incoming call. Adjust the receiver volume Press the or button. Turn the volume knob. Mute your voice NOTE • While monitoring the view camera, this screen does not appear even if a call comes in. To display this screen, press the button or return the shift knob of car to the driver position. Operations during a call Adjust the volume of your voice 1 Touch [Speech Quality].
Bluetooth Control Phone number preset You can register frequently used phone numbers to this unit. 1 2 Touch [ NOTE • To delete the preset number, touch [Delete] and then touch [YES] on the confirmation screen. ]. Voice Recognition Touch [Edit]. You can access the voice recognition function of the cell-phone connected to this unit. You can search the cell-phone phonebook by voice. (The functionality depends on the cell-phone.) 1 Press the < > button for 1 second.
Bluetooth Control Phonebook transfer 3 Touch [Delete Phonebook]. 4 Touch the name to check. You can transfer the phonebook in your Bluetooth smartphone via PBAP. 1 2 3 Touch [ ]. Touch [Edit]. Touch [Add to Phonebook]. [þ All] Checks all boxes. [¨ All] Erases all check marks. The phonebook data transmission starts. Phonebook deletion 1 2 Touch [ Touch [Edit]. ]. 5 6 Touch [Delete]. Confirmation message appears. Touch [Yes].
Bluetooth Control 3 Touch [Bluetooth]. Bluetooth SETUP screen appears. 4 Touch [TEL SETUP]. Auto Response* Sets an automatic response time to pick-up an incoming call. OFF (Default): Automatic response is not available. 1/ 5/ 10/ 15/ 20/ 25/ 30: Set calling ring time (second). Auto Pairing When set to “ON”, the Apple Auto Pairing function is turned on to automatically register the iPod touch or iPhone connected to this unit. ON (Default): Uses Apple Auto Pairing function.
Setting Up Setting Up Monitor Screen Setup You can adjust image quality in video, menu screen, etc. 1 2 Press the
Setting Up Monitor Angle Control View Camera Control You can select the front or rear view camera. You can adjust the position of the monitor. 1 2 Press the button. Angle Adjust screen appears. Select a below number that represents your desired angle setting. Default is “0”. 1 Press the 2 Touch [Camera].
Setting Up System Setup NOTE • Each operation in this section can be started from the multi function menu. 1 2 Press the
Setting Up Steering Remote Controller Sets the desired function in the steering remote controller. (Contact your KENWOOD dealer for details.) Time Zone If you have selected [Manual] for Clock, select the time zone. Clock Adjust If you select [Manual] for Clock, adjust the date and time manually. (P.80) Beep Turns the key touch tone on or off. Default is “ON”. Vehicle Adaptor Information*1 Displays the vehicle information. This function requires a commercial adaptor.
Setting Up Adjust the date and time manually. 1 Touch [Clock Adjust] on the User Interface screen. Clock Adjust screen appears. 2 Adjust the date, then adjust the time. 3 Touch [Set]. Touch panel adjustment ( / ) 1 2 Touch [Touch Panel Adjust] on the User Interface screen. Touch Panel Adjust screen appears. Follow the instruction on the screen and touch the center of each . NOTE • To cancel the touch panel adjustment, touch [Cancel]. • To reset to the initial status, touch [Reset].
Setting Up Special Setup You can setup Special parameters. 1 2 3 Audio SETUP Clear Clears the AUDIO SETUP Memory and the currently memorized audio setting. Press the
Setting Up Security Setup You can set up a security code to protect your receiver system against theft. 1 2 3 Press the
Setting Up Display Setup 1 2 3 Press the
Setting Up Registering original color You can register your original color. 1 2 3 4 Touch [User] in the Panel Color Coordinate screen. Touch [Adjust]. Panel Color RGB Coordinate screen appears. 2 You can load an image from the connected USB device and set it for the background image. Before operating this procedure, it is necessary to connect the device which has the image to load. 1 Use [−] and [＋] to adjust each color value.
Setting Up Camera Setup You can set camera parameters. 1 2 3 Press the
Setting Up Adjusting the parking guidelines 1 2 3 Touch [ON] of [Parking Guidelines] in the Camera screen. Touch [Guideline Setup] in the Camera screen. Adjust the parking guidelines by selecting the mark. Navigation Setup You can set navigation parameters. 1 2 3 4 Press the
Setting Up AV Setup You can set AV parameters. 1 2 3 Press the
Controlling Audio Controlling Audio NOTE • Each operation in this section can be started from the multi function menu. You can adjust the various settings such as audio balance or subwoofer level. 1 2 Press the
Controlling Audio Location (Only for Front, Rear) Select the speaker position you have fixed. Tweeter (Only for Front) You can set the tweeter when you are selecting front speakers. None, Small, Middle, Large X’over Displays the speaker crossover setup screen. You can adjust the crossover setup that was set automatically when you selected the speaker type. For details, see Crossover network setup (P.
Controlling Audio Crossover network setup You can set a crossover frequency of speakers. 1 Touch [X’over]. Phase Inversion*2 Sets the phase of subwoofer output. Check [Phase Inversion] to shift the phase 180 degrees. (When subwoofer is selected on Speaker Select screen) *1 Only when “Tweeter” is set to “Small”, “Middle”, “Large” in . *2 Only when “Subwoofer” is set to a mode other than “None” in .
Controlling Audio Controlling General Audio 1 2 Press the
Controlling Audio Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 2 Press the
Controlling Audio Save the EQ curve 1 2 3 Volume Offset Touch [Memory]. Finely adjust the volume of the current source to minimize the difference in volume between different sources. Select where to save. 1 Press the 2 Touch [Audio]. Adjust the EQ curve.
Controlling Audio Zone Control 6 Set each source as follows. You can select different sources for both front and rear positions in the vehicle. 1 2 Press the
Controlling Audio Sound Effect You can set sound effects. 1 2 Press the
Controlling Audio Listening Position/ DTA You can adjust the sound effects according to your listening position. 1 2 Press the
Controlling Audio Position DTA control You can fine-adjust your listening position. 1 2 3 4 5 Touch [Adjust]. Touch [Delay]. Touch [T] or [U] to adjust the delay time of the selected speaker. Touch [Level]. Touch [T] or [U] to adjust the sound level of the selected speaker. NOTE • To return to the initial setting of Delay and Level, touch [Initialize] and [YES] in the confirmation screen.
Controlling Audio Front Focus This is the function to focus the imaginary sound image in front of the selected seat. 1 2 Touch [Front Focus] in the Position/DTA screen. Front Focus fine adjustment 1 2 3 Touch [Adjust]. Touch [Delay]. Set each item as follows. Select a front focus position. For [Front All] and [All], select Priority L or R depending on which side you want to put the imaginary sound image. Sound Image LR (Front) Adjust the sound image to focus on in front of front seats.
Controlling Audio NOTE • To return to the initial setting of Delay and Level, touch [Initialize] and [YES] in the confirmation screen.
Remote control Remote control This unit can be operated using the remote control. The remote control is the optional accessory (KNA-RCDV331). 2CAUTION • Put the remote control in a place where it will not move during braking or other operations. A dangerous situation could result, if the remote control falls down and gets wedged under the pedals while driving. • Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result.
Remote control Functions of the Remote control Buttons Switching the operation mode The functions operated from the remote control differ depending on the position of the mode switch. AUD • DVD • TV• • NAV Direct search mode Using the remote control, you can jump directly to the desired file, track chapter, etc. with entering the number corresponding to the content. NOTE • This operation cannot be performed for USB device and iPod.
Remote control 4 1 2 3 5 6 7 9 11 8 10 12 13 17 19 18 20 21 22 23 24 14 25 15 16 1 2 3 4 5 6 7 8 102 Key Name SRC 26 Location of Function the mode switch AUD Switches to the source to be played. In hands-free mode, hangs up the phone. NAV − Switches between the navigation and the source screens. MENU DVD Stops playing and memorizes the last point where the disc stopped. The last point is deleted by pressing twice. NAV Displays Main menu. OUT, IN NAV Zooms in or out the navigation map.
Remote control 9 Key Name VOICE 10 VIEW 11 MAP DIR Location of Function the mode switch AUD Displays the control screen of current source. (USB/ SD/ iPod/ DISC) DVD Displays the DVD menu. Turns the playback control on or off while playing VCD. NAV Speaks the voice guidance. AUD, DVD Switches the AV source to be output. NAV Switches between 2D and 3D map displays. AUD, DVD Switches the display angle each time it is pressed.
Troubleshooting Troubleshooting Problems and Solutions If any trouble occurs, first check the following table for possible problems. • Some functions of this unit may be disabled by some settings made on this unit. • What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. About settings Problem • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter.
Troubleshooting Other Problem The Touch Sensor Tone doesn’t sound. Reason Solution The preout jack is being The Touch Sensor Tone cannot be output used. from the preout jack. Error Messages When you fail to operate the unit correctly, the cause of the failure appears as the message on the screen. Error Message here is an error in the speaker wiring. Please check the connections.
Troubleshooting Error Message Cause USB device The connected USB device is rated over current a current capacity higher than the status detected. allowable limit. Navigation Error. Please turn on power again later. 106 The communication error has occurred due to severely cold temperature. Solution Check the USB device. Some trouble may have occurred to the connected USB device. Change the source to any source other than USB. Remove the USB device. Turn on power again after warming your car interior.
Troubleshooting 107
Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit. List of playable discs Disc types Standard DVD DVD Video DVD Audio DVD-VR DVD-R*1 CD Others DVD-RW DVD+R DVD+RW DVD-R DL (Dual layer) DVD+R DL (Double layer) DVD-RAM Music CD*1 CD-ROM CD-R CD-RW DTS-CD Video CD (VCD) Super video CD Photo CD CD-EXTRA HDCD CCCD Dualdisc Super audio CD Support Remark ‡ × × • MP3/ WMA/ AAC/ WAV/ FLAC/ Vorbis/ MPEG1/ ‡ MPEG2/ MPEG4/ H.
Appendix ■■Use of DualDisc When playing a “DualDisc” on this unit, the surface of the disc that is not played may be scratched while the disc is inserted or ejected. Since the music CD surface does not conform to the CD standard, playback may be impossible. (A “DualDisc” is a disc with one surface containing DVD standard signals and the other surface containing music CD signals.) ■■About disc format The disc format should be the one of the following.
Appendix Connectable iPod/iPhone ■■Playing order of files In the example of folder/file tree shown below, the files are played in the order from ! to P. Root (1) ¡! 2 4 ^ : Folder ¡ 3 ¡$ 5 : Audio file ¡" ¡# ¡% ¡P The following models can be connected to this unit.
Appendix Usable USB device You can use a mass-storage-class USB device on this unit. The word “USB device” appearing in this manual indicates a flash memory device and digital audio players can be recognized as mass-storage. ■■About file system The file system should be the one of the following. • FAT16 • FAT32 • exFAT • NTFS NOTE • When the USB device is connected to this unit, it can be charged through the USB cable. • Install the USB device in the place where it will not affect safe driving.
Appendix Status Bar Indicator Items Shown below is a list of indicators displayed on the status bar in the screen. Current status of this unit is displayed on the bar. Status bar ■■General ATT The attenuator is active. DUAL The dual zone function is on. MUTE The mute function is active. LOUD The loudness control function is on. ■■DVD/CD IN A disc is inserted. • White: A Disc is inside the unit. • Orange: Error at the disc player VIDEO Identifies the video file. MUSIC Identifies the music file.
Appendix ■■USB/SD VIDEO Identifies the video file. MUSIC Identifies the music file. ■■iPod MUSIC Identifies the music file. ■■Digital Radio DAB Digital Radio is being received. RDS Radio Data System is being received. MC Receiving service is displayed. • White: Primary Component is received. • Orange: Secondary Component is received. ■■Tuner ST A stereo broadcast is being received. MONO The forced monaural function is on. AF The AF search function is on. EON The Radio Data System station is sending EON.
Appendix Region Codes in the World The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 ■■DVD disc marks ALL Indicates a region number. The discs with this mark can be played with any DVD player. 8 ■■Operation regulatory marks With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing.
Appendix DVD Language Codes Code aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gl gn gu ha he hi hr hu hy Language Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Gaelic Galician Guarani Gujara
Appendix Specifications ■■Monitor section Picture Size DNX8160DABS, DNX716WDABS, DNX516DABS : 6.95 inches (diagonal) wide : 156.6 mm (W) × 81.6 mm (H) 6-3/16 × 3-3/16 inch DNX5160DABS, DNX5160BTS, DNX3160BT : 6.2 inches (diagonal) wide : 137.5 mm (W) × 77.2 mm (H) 5-7/16 × 3-1/16 inch Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 1,152,000 (800H x 480V x RGB) Effective Pixels : 99.
Appendix ■■Bluetooth section Technology : Bluetooth Ver.3.0 Frequency : 2.402 – 2.480 GHz Output Power : +4dBm (MAX), 0dBm (AVE), Power Class2 Maximum Communication range : Line of sight approx. 10m (32.8 ft) Audio Codec SBC/ AAC Profile (Multi Profile support) • HFP (V1.6) (Hands Free Profile) • SPP (Serial Port Profile) • A2DP (Advanced Audio Distribution Profile) • AVRCP (V1.
Appendix ■■Video section ■■Navigation section Color System of External Video Input : NTSC/PAL Receiver : High-sensitivity GPS receiver External Video Input Level (RCA jacks) : 1 Vp-p/ 75 Ω Reception Frequency : 1575.
Appendix About this Unit ■■General Operating Voltage : 14.4 V (10.5 – 16 V allowable) Maximum Current Consumption : 15 A Installation Dimensions (W × H × D) DNX8160DABS : 182 × 112 × 163 mm DNX716WDABS : 178 × 100 × 160 mm DNX5160DABS, DNX5160BTS, DNX3160BT : 182 × 112 × 153 mm DNX516DABS : 178 × 100 × 147 mm Including the sub panel part (W × H × D) DNX716WDABS : 206 × 104 × 160 mm Operational Temperature Range : -10 °C – +60 °C Weight DNX8160DABS : 2.7 kg DNX716WDABS : 2.
Appendix • MHL and the MHL logo are a trademark or registered trademark of MHL, LLC. - Incorporates MHL 2 • THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (¡)ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (¡¡)DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO.
Appendix above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Appendix ■■Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts.
Appendix Declaration of Conformity with regard to the EMC Directive Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer: JVC KENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN EU Representative: JVCKENWOOD NEDERLAND B.V.
