DNX716WDABS DNX8160DABS DNX5160DABS DNX5160BTS DNX3160BT DNX516DABS GPS NAVIGATION SYSTEM INSTRUCTION MANUAL © 2016 JVC KENWOOD Corporation IM391_Nav_E_En_00
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
agree not to otherwise reproduce, archive, copy, modify, decompile, disassemble, reverse engineer or create derivative works of any portion of the Garmin Products, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws. Garmin also reserves the right to discontinue offering any Content supplied by any third party supplier if such supplier ceases to supply such content or Garmin's contract with such supplier terminates for any reason.
APPLICATION OR THE CONTENT SHALL NOT EXCEED $1.00. Some States, Territories and Countries do not allow certain liability exclusions or damages limitations, so to that extent the above may not apply to you. If you purchased your Application from a third party application vendor, THE SOLE AND MAXIMUM RESPONSIBILITY OF THE APPLICATION VENDOR IN THE EVENT OF A WARRANTY FAILURE IS A REFUND OF THE APPLICATION PURCHASE PRICE.
its licensors, including the licensors, service providers, channel partners, suppliers and affiliated companies of Garmin and its licensors, and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter. Governing Law.
Table of Contents Getting Started................................ 1 Navigation System ................................... 1 Status Bar Icons ...................................... 1 Using the On-Screen Buttons .................. 1 Removing a Shortcut ............................... 1 Adding a Shortcut .................................... 1 Updating the Software ............................. 1 Updating Map Data .................................. 1 Finding Locations........................... 1 Locations ...
Viewing the Weather Forecast .............. 10 Viewing Weather Near a Different City .................................................... 10 Viewing the Weather Radar .............. 10 Viewing Weather Alerts .................... 10 Checking Road Conditions ............... 10 Viewing Road Weather .......................... 10 Finding Fuel Stations and Prices ........... 10 Dynamic Parking ................................... 10 About Traffic.................................
Getting Started WARNING See the Safety Precautions and Important Information in the Quick Start Guide for product warnings and other important information. NOTE: The screenshots shown in this manual may not exactly match the screens on your navigation system. The images used in this manual are intended for reference only. Navigation System For complete audio system information, see the other KENWOOD system manuals. Removing a Shortcut 1 Select Where To? > > Remove Shortcut(s).
2 Select a category, or select Categories. 3 If necessary, select a subcategory. 4 Select a location. Searching Within a Category To narrow your search results, you can search within some categories. 1 Select Where To?. 2 Select a category, or select Categories. 3 If necessary, select a subcategory. 4 If necessary, enter all or part of the name in the search bar.
• To search for a city by name, select Enter Search, enter a city name, and select . Finding a Location Using Coordinates You can find a location using latitude and longitude coordinates. 1 Select Where To? > Categories > Coordinates. 2 If necessary, select > Format, select the correct coordinate format for the type of map you are using, and select Save. 3 Select the latitude coordinate. 4 Enter the new coordinate, and select Done. 5 Select the longitude coordinate.
4 Select the location description. 5 Select Set Location. Saving Locations Saving a Location 1 Search for a location (Finding a Location by Category). 2 From the search results, select a location. 3 Select . 4 Select > Save. Starting a Route to a Saved Location 1 Select Where To? > Saved. 2 If necessary, select a category, or select 4 Select > Edit > Categories. 5 Enter one or more category names, separated by commas. 6 If necessary, select a suggested category. 7 Select Done.
3 Select the map. 4 Select an option: About Exit Services • To zoom in or out, select or . • To rotate the map view, select . • To switch between North Up and 3-D views, select . • To add or remove map layers, select . • To view specific categories, select . • To center the map on your current location, select . • To view shortcuts for map and navigation features, select . Adding a Point to a Route Before you can add a point, you must be navigating a route. 1 From the map, select > Where To?.
Avoiding a Road 1 Select Settings > Navigation > Custom 2 3 4 5 Avoidances. Select Add Avoid Road. Select the starting point of the section of road to avoid, and select Next. Select the ending point of the road section, and select Next. Select Done. Disabling a Custom Avoidance You can disable a custom avoidance without deleting it. 1 Select Settings > Navigation > Custom Avoidances. 2 Select an avoidance. 3 Select > Disable. Deleting Custom Avoidances 1 Select Settings > Navigation > Custom Avoidances.
Changing the Map Data Field 1 From the map, select the data field in the Viewing the Entire Route on the Map 1 While navigating a route, select the navigation bar at the top of the map. 2 Select > Map. Customizing Map Buttons While navigating a route, a preview of the next turn, lane change, or other maneuver appears in the upper-left corner of the map. The preview includes the distance to the turn or maneuver and the lane in which you should be traveling, if available.
• Select Reset Max. Speed to reset the maximum speed. Reset. Select 4 Getting Directions to Your Current Location If you need to tell another person how to get to your current location, your device can give you a list of directions. 1 From the map, select the vehicle. 2 Select > Directions to Me. Viewing Current Location Information You can use the Where Am I? page to view information about your current location. This feature is helpful if you need to tell emergency personnel your location.
Braking: Displays your score for smooth and gradual braking. You lose points for hard braking. Resetting the ecoChallenge Scores 1 Select Apps > ecoRoute™ > ecoChallenge. 2 Select > Reset. 3 Select Yes. Viewing Fuel Economy Information 1 Select Apps > ecoRoute™ > Fuel Economy. 2 Select a section of the graph to zoom in. Mileage Reports Mileage reports provide the distance, the time, the average fuel economy, and the fuel cost of navigating to a destination.
Viewing Previous Routes and Destinations Before you can use this feature, you must enable the travel history feature (Device and Privacy Settings). You can view your previous routes and places you have stopped on the map. Select Apps > Where I've Been. Viewing the Weather Forecast Before you can use this feature, your device must be connected using Bluetooth to access connected services. This feature is not available in all areas. 1 Select Apps > Weather. 2 Select a day.
Your navigation system can receive traffic information using the built-in traffic receiver or a subscription to INRIX Traffic Service. The traffic receiver must be in data range of a station transmitting traffic data to receive traffic information. The traffic subscription activates automatically after your navigation system acquires satellite signals while receiving traffic signals from the service provider. When receiving INRIX traffic information, FM TMC information is not displayed.
Viewing a Traffic Incident on the Map 1 From the map, select . 2 Select Traffic Conditions. 3 Select a traffic icon. Understanding Traffic Data The traffic legend explains the icons and colors used on the traffic map. 1 From the map, select > Traffic. 2 Select Traffic Legend. Customizing the Device Map and Vehicle Settings To open the Map and Vehicle settings, from the main menu, select Settings > Map & Vehicle. Vehicle: Sets the icon that represents your position on the map.
• To use a dark background, select Night. • To allow the device to display day or night colors automatically, based on the time of day, select Auto. Traffic Settings From the main menu, select Settings > Traffic. Traffic: Enables traffic. Subscriptions: Lists the current traffic subscriptions. trafficTrends™: Enables the trafficTrends™ feature (trafficTrends). Traffic Voice Prompts: Enables voice prompts for traffic events.
To download free navigation software updates and purchase updated maps for your product, go to www.garmin.com/kenwood.
