Quick Start Guide

26
Installation
q
HDMI/MHL input
(DNX8160DABS/ DNX716WDABS only)
MHL maximum power supply current : 5 V = 900 mA
When you connect the cable to HDMI/MHL terminal,
remove the fixture. After connecting the cable, put the
fixture again.
HDMI/ MHL connector
Fixture
w
AV-IN1 input (Visual; Yellow, Left audio; White, Right
audio; Red)
(DNX8160DABS/ DNX716WDABS/ DNX5160DABS/
DNX516DABS/ DNX5160BTS only)
AV IN 1
3
2
1
79 81011
12
5 64
Visual Output (Yellow)
Rear view camera input
(Yellow)
Front view camera input
(Yellow)
1
TV tuner remote output
(DNX8160DABS/ DNX716WDABS/ DNX5160DABS/
DNX516DABS/ DNX5160BTS only)
2
DAB antenna CX-DAB1 (Optional accessory)
(DNX8160DABS/ DNX716WDABS/ DNX5160DABS/
DNX516DABS only)
Use of a CX-DAB1(optional accessory) as a DAB antenna is
recommended.
When using a commercially available DAB antenna, the diameter
of the SMB connector must be Φ6.5 mm or less.
Φ 6.5 mm (maximum)
3
FM/AM antenna input
4
AV Audio output (ø3.5 mini jack)
5
When connecting to an external amplifier, connect its
ground wire to the car’s chassis to avoid damaging the
unit.
Rear Audio Preout (Left; White, Right; Red)
Front Audio Preout (Left; White, Right; Red)
Subwoofer Preout (Left; White, Right; Red)
6
Connect to vehicle’s steering remote harness. Contact
your KENWOOD dealer for details.
(DNX8160DABS/ DNX716WDABS/ DNX5160DABS/
DNX516DABS/ DNX5160BTS only)
7
External I/F
(DNX8160DABS/ DNX716WDABS/ DNX5160DABS/
DNX516DABS/ DNX5160BTS only)
Maximum power supply current : 12 V = 500 mA
8
AV-IN2 (CA-C3AV; Optional Accessory) input
(AV-IN: DNX3160BT)
9
Accessory 6: GPS Antenna
p
Accessory 3: Bluetooth Microphone
Ñ Connecting the system and external components