DNX7190HD DNX7490BT DNX6990HD DNX6190HD DNX6490BT DNX5190 DNX5060EX GPS NAVIGATION SYSTEM Quick Start Guide Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Quick Start Guide About The Quick Start Guide Contents This Quick Start Guide explains the basic functions of this unit. For functions not covered in this guide, refer to the Instruction Manual (PDF file) contained in the included CDROM “Instruction Manual”. To refer to the Instruction Manual contained in the CD-ROM, a PC loaded with Microsoft® Windows XP/ Vista/7 or Mac OS X® 10.4 or later is required in addition to Adobe® Reader™ 7.1 or Adobe® Acrobat® 7.1 or later.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Precautions Lens fogging When you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit. Called lens fogging, this condensation on the lens may not allow discs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.
Quick Start Guide Acquiring GPS signal How To Reset Your Unit The first time you turn on this unit, you must wait while the system acquires satellite signals for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Safety Precautions and Important Information Read this information carefully before starting to operate the Kenwood Car Navigation System and follow the instructions in this manual. Neither Kenwood nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual.
Quick Start Guide First Step 1 Power on the unit and perform some setup steps before using. Touch the corresponding key and set the value. Press the
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX 2 Touch [Finish]. NOTE • For details on operations of each setting, refer to the Instruction Manual.
Quick Start Guide Basic Operations Functions Of The Buttons On The Front Panel DNX7190HD/DNX7490BT 10 11 1 2 3 4 5 6 7 8 9 How To Insert An SD Card 1) Press 8 <0> button for 1 second. The panel fully opens. 2) Hold the SD card as the diagram in the right and insert it into the slot until it clicks. ● To eject the card: Push the card until it clicks and then remove your finger from the card. The card pops up so that you can pull it out with your fingers.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Number 1 Name fi (Reset) Motion • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.111). • If the SI function is turned on, this indicator flashes when the vehicle ignition is off (Instruction Manual P.84). 2 ATT • Switches attenuation of the volume on/off.
Quick Start Guide DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX 1 7 8 2 3 4 9 DNX6490BT 5 6 10 DNX6990HD DNX6490BT How To Insert A MicroSD Card 1) Open the 10 microSD card slot cover as the diagram in the right. 2) Hold the microSD card with the label facing left and the notched section up, and insert it into the slot until it clicks. ● To eject the card: Push the card until it clicks and then remove your finger from the card. The card pops up so that you can pull it out with your fingers.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Number 1 Name fi (Reset) Motion • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.111). • If the SI function is turned on, this indicator flashes when the vehicle ignition is off (Instruction Manual P.84). 2 MENU • Displays the Top Menu screen (Instruction Manual P.14). • Pressing for 1 second turns the power off.
Quick Start Guide Common Operations General There are some functions which can be operated from most screens. [Menu] Returns to the Top Menu screen. (RETURN) Returns to previous screen. (common menu key) Touch to display the common menu. The contents of the menu are as follows. : Displays the EXT SW Control screen. : Displays the SETUP Menu screen. : Displays the Audio Control Menu screen. : Displays the control screen of current source. Icon feature differs depending on the source.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX How To Use The Navigation System 1 2 Press the
Quick Start Guide 4 Follow your route to the destination. NOTICE • The speed limit icon feature is for information only and does not replace the driver’s responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin and Kenwood will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs. Your route is marked with a magenta line.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Other Features ● Manually avoiding traffic on your route 1) 2) 3) 4) From the map, touch the traffic icon. Touch [Traffic On Route]. If necessary, touch the arrows to view other traffic delays on your route. Touch [Avoid]. ● Viewing the traffic map The traffic map shows color-coded traffic flow and delays on nearby. ● About traffic NOTICE • Traffic service is not available in some areas or countries.
Quick Start Guide How To Play Music You can play audio files from music CD, disc media, USB storage device and iPod. NOTE • For details on playable file format, media format, iPod model, etc., refer to the Instruction Manual. 1 Connect the media you want to play as shown below. Disc 1) Press the <0> button to open the front panel. 2) Insert the disc into the slot. The panel closes automatically and playback starts. ● To eject the disc: Press the <0> button. 0 1) Insert the disc into the slot.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX 2 Control the music you are listening to on the source control screen. The following symbols indicate the keys on the screen. The functions of the keys are the same despite the difference of the source you are listening to.
Quick Start Guide How To Play Movie/Picture You can play DVD video, Video CD (VCD), movie files from disc media, iPod and picture files from USB storage device. NOTE • For details on playable file format, device format, etc., refer to the Instruction Manual. 1 Connect the media you want to play. For the method of connecting, see How To Play Music (P.16). 2 Control the movie/picture by touching the screen. Each area on the screen has a separate function.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX How To Listen To The Radio/ HD Radio™ tuner/ SiriusXM™ Satellite Tuner 1 Touch [Menu] on any screen. Top Menu screen appears. 2 Touch [TUNER], [HD Radio], or [SIRIUS XM]. The unit switches to the radio/ HD Radio tuner / SIRIUS XM Satellite Tuner source. 3 Operate on the source control screen. ● Station search ]. 1) Touch [ Sub function menu appears. 2) Touch [AM] or [FM] to select the band.
Quick Start Guide How To Make A Phone Call You can use your Bluetooth cell-phone when paired to this unit. 1 Register your cell-phone to the unit. Follow as the procedures shown below. For detailed operation, see Registering the Bluetooth Unit (P.69) in the Instruction Manual. 1) Press the button and touch [BT SETUP]. 2) Touch [SET] of [Regist New Device] in the Bluetooth SETUP screen. 3) Touch [PIN Code Set] in the Searched Device List screen. 4) Enter PIN code and touch [Enter].
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX 4 Make or receive a phone call. See the table below for each operation method. Call by entering a phone number 1 Touch [Direct Number]. 2 Enter a phone number with number keys. ]. 3 Touch [ Call using call records 1 Touch [Incoming Calls], [Outgoing Calls], or [Missed Calls]. 2 Select the phone number from the list. 3 Touch [ ]. Redial 1 Touch [Redial] to display the previously called number. ].
Quick Start Guide Installation Procedure • If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. • If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating. • Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Unit Installation Procedure 1 To prevent a short circuit, remove the key from the ignition and disconnect the terminal of the battery. 2 Make the proper input and output wire connections for each unit. 3 Connect the speaker wires of the wiring harness. 4 Connect the wiring harness wires in the following order; ground, battery, ignition. 5 Connect the wiring harness connector to the unit. 6 Install the unit in your car.
Quick Start Guide ● Toyota/Scion cars ● Toyota, Nissan or Mitsubishi car 6 (M5x6mm) or 7 (M5x7mm) 1) Cut out accessory 4 as illustrated. Car Bracket Cutting line 6 (M5x6mm) or 7 (M5x7mm) 4 NOTE • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). 2) Fold double-sided adhesive (accessory 5) along the slit and attach it to accessory 4 cut-out against the center rib as illustrated.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX GPS antenna Microphone unit 1) Check the installation position of the microphone (accessory -). 2) Remove oil and other dirt from the installation surface. 3) Install the microphone. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. GPS antenna is installed inside of the car.
Quick Start Guide Removing the unit NOTE • Install the microphone as far as possible from the cell-phone. 1) Remove the hard rubber frame by referring to step 1 in “Removing the hard rubber frame”. 2) Insert the two removal tools (accessory3) deeply into the slots on each side, as shown. Removing Procedure Removing the hard rubber frame (escutcheon) 3 1) Engage the catch pins on the removal tool (accessory3) and remove the two locks on the lower level.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Connection Connecting wires to terminals (1) Accessory - Accessory 9 Accessory - Accessory 9 Fuse (15A) Cooling fan Cooling fan Fuse (15A) Accessory 1 Connect to the vehicle’s parking brake detection switch harness. Speaker impedance: 4-8 Ω White/Black Light Green (Parking sensor wire) PRK SW For best safety, be sure to connect the parking sensor.
Quick Start Guide Connecting wires to terminals (2) Ignition key switch Accessory 1 ACC Red (Ignition wire) Yellow (Battery wire) Car fuse box (Main fuse) Car fuse box A Black (Ground wire) (To car chassis) A Battery To steering remote To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matched to your car. To car light control switch Connect to the terminal that is grounded when either the telephone rings or during conversation.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX System connection Refer to the box1 below Refer to the box2 below Refer to the box2 below iPod/ AV-IN2 (CA-C3AV; Optional Accessory) input AV input (CA-C3AV; Optional accessory) Accessory 1 To Camera control terminal Accessory 2 Green/Red Green/White Blue/Red 1 To Relay Box Rear View Camera Input - Yellow (Visual Input) Audio/Visual Output - Yellow (Visual Output) - White (Audio Left Output) - Red (Audio Right Output) 2 Rear Pr
Quick Start Guide Optional accessory connection iPod (commercially available) USB device (commercially available) KCA-iP202 (Optional Accessory) USB terminal (0.8m) USB terminal AV Output (1.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX • ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. • ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.
Quick Start Guide DNX7190HD/ DNX6990HD/ DNX6190HD/ DNX5190/ DNX5060EX: ■■FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX DNX7490BT/ DNX6490BT: ■■The marking of products using lasers CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.