GPS Receiver User Manual

6
Quick Start Guide
First Step
Power on the unit and perform some
setup steps before using.
Press the <MENU> button.
The unit is turned on.
● To turn off the unit:
Press the <MENU> button for 1 second.
Press the <MENU> button.
The unit is turned on.
● To turn off the unit:
Press the <MENU> button for 1 second.
The “Initial setup” is only necessary
when you use the unit for the first
time after purchase, and when you
reset the unit.
1
Touch the corresponding
key and set the value.
Language
Select the language used for the control
screen and setting items. Default is “American
English (en)”.
After setting, touch [Enter].
Angle
Adjust the position of the monitor. Default is
“0”.
After setting, touch [
].
iPod AV Interface Use
Set the terminal which your iPod is connected
to. Default is “iPod”.
Color
Set the screen and button illumination color.
You can select whether to perform color scan
and adjust scanning color.
After setting, touch [
].
EXT SW
Control the external devices.
After setting, touch [
].
Camera
Set the parameters for the camera.
After setting, touch [
].
OEM SETUP
This function requires a commercial adaptor.
Consult your Kenwood dealer for details.