Operation Manual

8484 85
Return to the Top page
Setting Up
Return to the Top page
Setting Up
Travel Prayer for Safe Drive Setting
(DNX7330BTM/ DNX5330BTM only)
Whenthisfunctionisset,theprayerfor
drivingsafetyisdisplayedwhentheunitis
turnedon,thenQuranisplayed.
1 Touch [SET] of [Travel Prayer for Safe
Drive] in the User Interface screen.
Travel Prayer for Safe Drive Setting screen
appears.
2 Set each item as follows.
Travel Prayer for Safe Drive
TurnstheSafedriveprayfunctiononoroff.
Sound Volume
SetsthesoundvolumeofQuran.
Touch panel adjustment
1 Touch [Touch] in the System Menu
screen.
Touch Panel Adjustment screen appears.
2 Follow the instruction on the screen
and touch the center of each .
NOTE
• Tocancelthetouchpaneladjustment,touch
[Cancel].
• Toresettotheinitialstatus,touch[Reset].
Security setup
Youcansetupasecuritycodetoprotect
yourreceiversystemagainsttheft.
NOTE
• WhentheSecurityCodefunctionisactivated,the
codecannotbechangedandthefunctioncannot
bereleased.NotetheSecurityCodecanbesetas
the4digitnumberofyourchoice.
1 Touch [Security] in the System Menu
screen.
Security screen appears.
2 Touch [ON] of [SI].
NOTE
• If“SI”isturnedon,theSIindicatoronthesub
panelflasheswhenthevehicleignitionisoffand
thepanelisdetached( ).Defaultis“ON”.
3 Touch [SET] of [Security Code Set].
NOTE
• Ifyouhavealreadycompletedthecode
registration,[CLR]isdisplayed.
4 Enter a security code with four-digit
number and touch [Enter].
5 Enter the same code again and touch
[Enter].
Security code is registered.
NOTE
• Ifyouenteradifferentsecuritycode,thescreen
returnstostep4(forthefirstcodeentry).
• Ifyouhavepressed<Reset>buttonorifyou
havedisconnectedtheReceiverfrombattery,
enterthecorrectsecuritycodeasthatyouhave
enteredinstep4andtouch[Enter].Youcanuse
yourreceiver.