Owner's Manual

Quick Start Guide
NOTE
• Install
the
microphone
as
far
as
possible
from
the
cell-phone.
Removing Procedure
Removing
the
hard
rubber
frame
(escutcheon}
1)
Engage
the
catch pins on
the
removal
tool
(accessory@) and
remove the
two
locks
on the
lower
level.
Lower
the
frame and
pull
it
forward
as
shown in the figure.
·The
frame can be removed from
the
top
side in
the
same manner.
2)
When the
lower level
is
removed,
remove the upper
two
locations.
-26-
Removing
the
unit
1)
Remove the hard rubber frame by
referring
to
step
1
in "Removing
the
hard
rubber
frame".
2)
Insert
the
two
removal
tools
(accessory@) deeply
into
the
slots
on each
side,
as
shown.
3)
Lower the
removal
tool toward
the
bottom, and pull
out
the
unit
halfway while pressing towards
the
inside.
NOTE
•
Be
careful
to
avoid injury
from
the
catch
pins on
the
removal tool.
4)
Pull
the unit all
the way
out
with
your hands, being careful
not
to
drop
it.