Owner's Manual

7272 73
Return to the Top page
Bluetooth Operation
Return to the Top page
Bluetooth Operation
Registering Bluetooth unit PIN
code
YoucansetthePINcodetotheBluetooth
unit.Thecodeisacquiredwhenregistering
(pairing)fromthecell-phoneoraudioplayer
side.
1
Touch [SET] of [Receiver PIN Code] in
the Bluetooth SETUP screen.
Receiver PIN Code Set screen appears.
2
Enter a code number and touch
[Enter].
NOTE
• If you want to cancel the registration, touch
[Cancel].
• If you want to clear the entered number, touch
[Clear].
Bluetooth output setup
Youcanselectspeakerstooutputthesound
fromcell-phone(suchasphonecallvoice
andringingtone)andBluetoothaudio
player.
1
Touch [Front Only] or [All] of
[Bluetooth HF/Audio] in the Bluetooth
SETUP screen.
Front Only
Outputs from the front speakers.
All
Outputs from all speakers.
Hands-Free Control
Youcanperformvarioussetupabouthands-
freefunction.
1
Press the <TEL> button.
Hands Free screen appears.
2
Touch desired key in the Hands Free
screen.
See the following section for each setting.
• Set up the Hands-Free system(P.73)
• Set up SMS (P.74)
• Preset the phone number (P.76)
Setting up the Hands-Free
phone
1
Touch [TEL SETUP] in the Hands Free
screen.
Hands Free SETUP screen appears.
2
Set each item as follows.
Auto Response*
1
Sets an automatic response time to pick-up an
incoming call.
OFF (Default): Automatic response is not
available.
0-99: Set calling ring time (second).
Call Beep
Select whether to beep at an incoming call.
ON (Default): Beeps.
OFF: Not beeps.
SMS Receive Beep
Select whether to beep at an incoming SMS.
ON (Default): Beeps.
OFF: Not beeps.
Phone Information Use
Sets whether to download phonebook for
outgoing, incoming and missed calls list.
ON (Default): Yes.
OFF: No.
SMS Use
Select whether to use SMS.
ON (Default): Uses SMS.
OFF: Not uses SMS.
Sort Order
Sets how to arrange the cell-phone
phonebook.
First: Arranges in the order of first name.
Last (Default): Arranges in the order of last
name.
Echo Cancel Level
Adjusts the level of echo cancellation.
Default is “0”.
Microphone Level
Adjusts the sensitivity of the telephone
microphone. Default is “20”.
Noise Reduction Level
Reduces the noises generated by surrounding
environment without changing the
microphone volume. Use this setting when the
voice of caller is not clear. Default is “0”.
[Restore]
Resets the settings to the default settings.
*1Eitherthetimeintervalforautomatic
answersetonthisunitorthetimeinterval
setonthecell-phone,whicheverisshorter
takeseffect.