DNX7150DAB DNX715WDAB DNX4150DAB DNX4150BT DNX4150BTR GPS NAVIGATION SYSTEM Quick Start Guide You can update the system by connecting a USB device containing an update file. For updating the system, visit .
Contents About the Quick start guide.................................. 2 Precautions.................................................................. 3 Safety Precautions and Important Information............................................................... 5 About the Quick start guide This Quick Start Guide describes basic functions of this unit. For functions not described in this Guide, refer to the Instruction Manual on the following website: http://manual.kenwood.com/edition/im386/ First Step....
Precautions #WARNING ÑÑTo prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. • If you experience problems during installation, consult your Kenwood dealer.
ÑÑAcquiring GPS signal The first time you turn on this unit, you must wait while the system acquires satellite signals for the first time. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. After the system acquires satellites for the first time, it will acquire satellites quickly each time thereafter.
Safety Precautions and Important Information Read this information carefully before starting to operate the Kenwood Car Navigation System and follow the instructions in this manual. Neither Kenwood nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual. #WARNING Failure to avoid the following potentially hazardous situations could result in an accident or collision resulting in death or serious injury.
First Step Various setup screens appear automatically before using. ÑÑInitial setup Camera Set the parameters for the camera. (Instruction Manual P.90) After setting, touch [6]. DEMO Set the demonstration mode. Default is “ON”. When you first turn on the unit, the screen of the configuration setting will appear. 3 Touch [Finish]. 1 Turn the ignition key of your car to ACC. ✎✎NOTE The unit is turned on. Initial SETUP screen appears. 2 Touch the corresponding key and set the value.
ÑÑiPod/iPhone connection setup When you first select iPod as a source, the setting screen of the iPod/iPhone connection will appear. 1 Press the button. HOME screen appears. 2 Touch [iPod] in the HOME screen. iPod connection setup screen appears. 3 Touch [CHANGE]. Select the way of iPod/iPhone connection. For the details, refer to ”iPod/iPhone connection setup” (P.54) in the Instruction Manual.
Functions of the Buttons on the Front Panel ÑÑDNX7150DAB 8 9 HOME 1 No. 2 3 4 5 Name/Motion 1 s (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.113). • If the Security Indicator (SI) function is turned on, this indicator flashes when the panel is detached (Instruction Manual P.84). 2 R,S • Adjusts volume. 3 NAV • Displays the navigation screen.
ÑÑDNX715WDAB 1 2 8 9 3 4 5 6 7 No. Name/Motion 1 NAV • Displays the navigation screen. • Pressing for 1 second switches AV out sources. 2 R,S • Adjusts volume. 3 HOME • Displays the HOME screen (Instruction Manual P.19). • Pressing for 1 second turns the power off. • When the power off, turns the power on. 4 MENU • Displays the option menu screen. • Pressing for 1 second turns the screen off.*1 No. Name/Motion 9 SD card slot • A slot to insert an SD card.
ÑÑDNX4150DAB/ DNX4150BT/ DNX4150BTR 3 2 1 4 5 6 ATT 7 8 No. Name/Motion 1 Disc insert slot • A slot to insert a disc media. 2 G (Eject) • Ejects the disc. • Pressing for 1 second ejects the disc forcibly. 3 s (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.113).
Detaching/ Attaching the faceplate and insert a SD Card ÑÑDNX7150DAB Detaching the faceplate Insert an SD Card 1) Press button for 1 second. The panel fully opens. 2) Hold the SD card with the label facing up, and insert it into the slot until it clicks. Labelled side 1) Press button for 1 second. The panel fully opens. 0 0 Attaching the faceplate 2) Detach the panel as the diagrams below. 1) Hold the front panel securely so as not to drop it accidentally.
ÑÑDNX715WDAB Insert an SD Card 1) Press button for 1 second. The panel fully opens. 2) Hold the SD card with the label facing up, and insert it into the slot until it clicks. Labelled side ÑÑDNX4 Insert a microSD Card 1) Hold the microSD card with the label side facing right and the notched section down, and insert it into the slot until it clicks. Common Operations ÑÑPopup menu 1 Press the DNX7 Volume knob.
(common menu key) Touch to display the common menu. The contents of the menu are as follows. : Displays the SETUP Menu screen. : Displays the Audio Control Menu screen. : Displays the control screen of current source. Icon feature differs depending on the source. : Closes the menu. ÑÑList screen There are some common function keys in the list screens of most sources. How to Use the Navigation System 1 Press the
2 1 4 5 3 6 7 8 9 • For more information about your navigation system, download the latest version of the Owner’s Manual from http://manual.kenwood.com/edition/im386/. No. 3 Enter your destination and start the 1 Views the Next Turn page or the junction view page, when available. guidance. points of interest Finding 1) Touch [Where To?]. 2) Select a category and a subcategory. 3) Select a destination. 4) Touch [Go!].
Viewing the traffic map 1) The traffic map shows color-coded traffic flow and delays on nearby. About traffic ✎✎NOTICE • Traffic service is not available in some areas or countries. • Garmin and JVC KENWOOD are not responsible for the accuracy or timeliness of the traffic information. • You can receive INRIX traffic information and weather forecast by connecting your iPhone or Android smartphone in which the “KENWOOD Traffic Powered By INRIX” application is installed.
To disconnect the iPod/iPhone connected with the cable: 1) Touch on the left side of the screen to display the function panel. 2) Touch [ G ]. Disconnect the iPod/ iPhone from the cable. USB device 1) Connect the USB device with the USB cable. Basic operations from this screen To disconnect the USB device: 1) Touch on the left side of the screen to display the function panel. 2) Touch [ G ]. Disconnect the device from the cable.
Refined search 1) Touch [ ]. 2) Touch the desired refinement method. The list is refined by the item you selected. 3) Touch the desired item. No. Name/Motion 3 • Searches the next/previous content or file. • Scrolling from center of display to left or right performs fast backward or fast forward. To stop fast backward/forward, touch center of the display.*1 *1 F or USB/ SD Card, this function may be unavailable depending on the playing file format.
Auto memory (Radio only) 1) Touch [AM/FM] to select the band. 2) Flick the screen from the left end to right to display the function panel. 3) Touch [AME]. 4) Touch [E] or [F]. Auto memory starts. Recalling the preset station 1) Touch [P#] (#:1-15), [FM#] (#:1-15) or [AM#] (#:1-5). ✎✎NOTE • For other operations, see Radio Basic Operation (P.58), Digital Radio Basic Operation (P.60) in the Instruction Manual.
Call using call records 1) Touch [ ] (incoming calls), [ ] (missed calls), or [ ] (outgoing calls). 2) Select the phone number from the list. 3) Touch [ ]. Call using the phonebook 1) Touch [ ]. 2) Select the name from the list. 3) Select the number from the list. 4) Touch [ ]. Call using the preset number 1) Touch [Preset #] to start calling the corresponding phone number. 2) Touch [ ]. Call by voice You can make a voice call using the voice recognition function of the cell-phone.
• Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. • Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the ¤ wires or ground them to any metal part in the car.
ÑÑGPS antenna DNX7150DAB, GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. DNX715WDAB Screw (M5x6mm) (Sold separately) Car Bracket 1) Clean your dashboard or other surface. 2) Remove the separator of the metal plate (accessory 7).
ÑÑMicrophone unit 1) Check the installation position of the microphone (accessory 8). 2) Clean the installation surface. 3) Remove the separator of the microphone (accessory 8), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method. 5) Adjust the direction of the microphone (accessory 8) to the driver.
ÑÑRemoving the unit (DNX7150DAB, 1) Remove the trim plate by referring to step 1 in “Removing the trim plate”. 2) Insert the two extraction key (accessory4) deeply into the slots on each side, as shown. 4 3) Lower the extraction key toward the bottom, and pull out the unit halfway while pressing towards the inside.
ÑÑSystem connection Visual Output Accessory 8 Rear view camera input Accessory 8 Accessory 6 1 Accessory 6 1 2 2 AV Audio output AV Audio output Accessory 3 Audio/Visual Input Visual Output Rear view camera input Green/Red Green/White 1 Rear Audio Preout Front Audio Preout Subwoofer Preout When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit. 24 ñ English Connect to the vehicle’s parking brake detection switch harness.
ÑÑConnecting wires to terminals DAB antenna CX-DAB1 (Optional accessory) (DNX7150DAB, DNX715WDAB, DNX4150DAB only) Fuse (10A) Use of a CX-DAB1(optional accessory) as a DAB antenna is recommended. When using a commercially available DAB antenna, the diameter of the SMB connector must be Φ6.5 mm or less. Φ 6.
ÑÑOptional accessory connection KCA-MH100 (1.8 m)[3] Android smartphone[2] iPod/ iPhone[2] 2 3 5 1 5 4 2 3 4 USB terminal[1] (0.8 m) USB terminal[1] (0.8 m) Lightning Digital AV Adapter[2] USB device[2] SB maximum power supply U current : DC 5 V = 1 A [2] Sold separately [3] Optional accessory [1] KCA-HD100 (1.8 m)[3] Video Output (1.8m) USB terminal (0.8m) iPod[2] KCA-iP202[3] KCA-iP102 (0.8m)[3] KCA-iP103 (0.
About this Unit ÑÑCopyrights • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. • The “AAC” logo is a trademark of Dolby Laboratories.
• libFLAC Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2 007,2008,2009 Josh Coalson Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
ÑÑConnectable iPod/iPhone ÑÑRequirements Aha™: iPhone or iPod touch Made for • iPhone 5s • iPhone 5c • iPhone 5 • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone • iPod touch (5th generation) • iPod touch (4th generation) • iPod touch (3rd generation) • iPod touch (2nd generation) • iPod touch (1st generation) • iPod classic • iPod with video • iPod nano (7th generation) • iPod nano (6th generation) • iPod nano (5th generation) • iPod nano (4th generation) • iPod nano (3rd gener
ÑÑInformation on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you.
Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer: JVC KENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN EU Representative: JVCKENWOOD NEDERLAND B.V.