Owner's Manual

6868 69
Return to the Top page
Bluetooth Operation
Return to the Top page
Bluetooth Operation
Receiving a call
1
Touch [ ] to answer a phone call or
[ ] to reject an incoming call.
NOTE
• While monitoring the camera view, this screen
does not appear even if a call comes in. To display
this screen, press the <TEL> button or return the
shift knob of car to the driver position.
Operations during a call
Adjust the receiver volume
Turn the volume knob.
Switch the voice output
Touch [
] to switch the voice output
between phone and speaker.
Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
Bluetooth Setup
YoucanregisterPINcode,selectthedevice
toconnect,andperformoutputsetup.
1
Press the <TEL> button.
Hands Free screen appears.
2
Touch [BT SETUP].
Bluetooth SETUP screen appears.
See the following section for each setting.
• Register the PIN code (P.69)
• Select the unit to connect (P.64)
• Set up output (P.69)
Registering Bluetooth unit PIN
code
YoucansetthePINcodetotheBluetooth
unit.Thecodeisacquiredwhenregistering
(pairing)fromthecell-phoneoraudioplayer
side.
1
Touch [SET] of [Receiver PIN Code] in
the Bluetooth SETUP screen.
Receiver PIN Code Set screen appears.
2
Enter a code number and touch
[Enter].
NOTE
• If you want to cancel the registration, touch
[Cancel].
• If you want to clear the entered number, touch
[Clear].
Bluetooth output setup
Youcanselectspeakerstooutputthesound
fromcell-phone(suchasphonecallvoice
andringingtone)andBluetoothaudio
player.
1
Touch [Front Only] or [All] of
[Bluetooth HF/Audio] in the Bluetooth
SETUP screen.
Front Only
Outputs from the front speakers.
All
Outputs from all speakers.