GPS NAVIGATION SYSTEM DNX7340BT DNX7340BTM DDX7034BT DDX7034BTM DDX6034 DDX6034M MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL This instruction manual is used to describe models listed below. Model availability and features (functions) may differ depending on the country and sales area. • Region 2 (DVD Region Code 2 area) • Region 3 (DVD Region Code 3 area) • Region 4 (DVD Region Code 4 area) • Region 6 (DVD Region Code 6 area) © B64-4512-00/01 (MW/M2W/XW/VV) B64-4512-00_01-M_English.indd 1 09.4.
Contents How to read this manual Before Use Notes 4 6 7 Initial Setup 85 Radio Listening 31 Functions of the buttons on the front panel 10 Getting Started 12 How to Display the Navigation Screen How to Select the Source How to Set a Medium / a Device Basic Operation How to Display the Source Control Screen How to Display Top Menu Screen Operation on the Playback Screen of Visual Sources How to Display the Easy Control Screen 12 12 13 14 14 15 16 17 Watching DVD/Video CD 18 Playback Screen Easy
Hands Free Unit Control Before Use Downloading the Phonebook Receiving a Call During a Call Call Waiting Making a Call Calling by Phonebook Calling by Entering a Phone Number Making a Call Using Call Records Calling by Voice Recognition Controlling Tone-based Services Setting Up the Hands-Free Phone Voice Registration Key Word Voice Registration Phone Number Preset SMS (Short Message Service) Audio Control Audio Control Menu Audio Control Equalizer Control Graphic Equalizer Setup (DNX/ DDX7 models) Tone Se
How to read this manual This manual uses illustrations to explain its operations. Source Control Screen The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Switches to the source control screen to use various functions. 1 Display the Source Control Screen See .
About the model groups If different functions are used in different model groups, the model groups are described as shown below. Names of models included in each model group are as follows: DNX models DNX7340BT, T DNX7340BTM DDX models • DDX7 models DDX7034BT, T DDX7034BTM • DDX6 models DDX6034, DDX6034M Function Icon Icons representing available functions are shown below. DEO DEO EO : Function of DVD-VIDEO playback. -VVR : Function of DVD-VR playback. -VR : Function of Video CD playback.
Before Use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. How to reset your unit • If the unit or the connected unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Notes About Audio files List of playable discs Disc types DVD CD Others Standard Support DVD Video DVD Audio DVD-VR DVD-R ‡ × ‡ ‡ DVD-RW ‡ DVD+R ‡ DVD+RW ‡ DVD-R DL (Dual layer) DVD+R DL (Double layer) DVD-RAM Music CD ‡ ‡ × ‡ CD-ROM ‡ CD-R ‡ CD-RW ‡ DTS-CD Video CD (VCD) Super video CD Photo CD CD-EXTRA ‡ ‡ × × % HDCD % CCCD Dualdisc Super audio CD × × % Remark Not compatible with CPRM.
Notes About Picture files • Acceptable picture files JPEG • Extensions jpg, jpeg • Acceptable media CD-R/RW/ROM, DVD±R/RW, mass-storage-class USB device, SD/SDHC card Acceptable discs, disc formats, USB device or SD card file system, file and folder names and playing order are the same as those for audio files. See .
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks Symbol With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
Functions of the buttons on the front panel For DDX models TOP ATT VOLUME AUD NAV SRC A B C D E TEL F G Reset button (page 6) SI indicator (page 62) Remote control sensor 1 sec. : Press for more than 1 second A Attenuation of the volume On/Off. 1 sec. Switches the source that is output at the AV OUTPUT terminal. B Volume adjustment. C Displays Graphic Equalizer/ Tone Control screen.*1 ET 1 sec. Rear view display On/Off.*2 D DNX models Displays the navigation screen.
Functions of the buttons on the front panel F DNX models Hands Free control screen On/Off. 1 sec. 7 While watching the navigation screen or playback screen of a visual source Displays the Easy Control screen. & 7 While watching the screen other than the above Screen Switching function On/Off. ! DDX models Hands Free control screen On/Off. 1 sec. While watching the navigation screen or playback screen of a visual source Displays the Easy Control buttons. & G Opens the panel and ejects the disc.
Getting Started How to Display the Navigation Screen How to Select the Source DNX models Sources can be selected from the Source Select screen. Source Select screen (Example) NAV The navigation screen appears. DDX models TOP SRC The Source Select screen appears. Touch the icon of the source. Use or to turn the page. For how to operate each source, see the following pages. The navigation screen appears. • For how to set up and use the navigation function, see the Navigation Instruction Manual.
Getting Started How to Set a Medium / a Device 7 Disc media 7 SD card (DNX/ DDX7 models only) For DNX models: Update the navigation software. For DDX7 models: Audio File Listening & Video File/ Picture File Watching 0 Press the [0] button to open/close the front panel. If a disc is already inserted, it is ejected by pressing the [0] button. 7 iPod Press the [0] button for more than 1 second to open the front panel.
Basic Operation How to Display the Source Control Screen On the Source Control screen you can find all the control buttons for the selected source. Source Control Screen The Source Control Screen appears. DNX/DDX models While watching the Easy Control Screen • For how to use each button, see the operation pages of each source. TEL How to display the Source Control screen DNX models 1 sec. While watching the navigation screen The Source Control Screen appears. ⁄ The Source Control Screen appears.
Basic Operation How to Display Top Menu Screen Top Menu Screen is the entrance to all the functions. You can enter source operation screen as well as various setup menu from this screen. Top Menu screen How to display the Top Menu screen Buttons on the Top Menu screen V ] Switches to the navigation screen. [NAV ] Switches to the source control screen [SRC of the selected source. [TEL ] Switches to the Hands Free Main screen. (page 45) [NAV SETUP] Displays Navigation SETUP screen.
Basic Operation Operation on the Playback Screen of Visual Sources How to display the playback screen While watching visual sources, basic operation is possible by touching the screen. SRC The screen has 4 function areas. The function of each area is different depending on the sources. (Some areas are unavailable for some sources.) Playback screen of a visual source The Source Select screen appears. Touch the icon of the source. 2 1 3 The Playback screen of a visual source appears.
Basic Operation How to Display the Easy Control Screen Basic operation buttons of the selected source can be displayed on the playback screen of visual sources so that you can control the source without switching the screen. Easy Control Screen Buttons on the Easy Control Screen [∞] Changes the function as follows by touching the [∞] button. [SCRN] Displays Screen Control screen (page 43). [TEL] Switches to the Hands Free Main screen (page 45). [EXT SW] Switches to the EXT SW Control screen (page 41).
Watching DVD/Video CD You can play DVD/Video CD using various functions. • Set the remote controller mode switch to "DVD" mode before starting operation, see (page 79). Playback Screen Easy Control Screen Basic functions are available even when the playback screen is displayed. Displays the basic operation buttons on the screen. 1 Display the Playback Screen 1 Display the Easy Control Screen See (page 16).
2 Operation on the Source Control Screen Multi Function DVD-VIDEO/DVD-VR 1 [ ] Closes the multi function bar. DVD-VIDEO Video CD 1 [REP] Switches the Repeat Play operations in the following sequence. Title Repeat, Chapter Repeat, Repeat Off [TIME] Switches the play time display in the following sequence. Chapter ("C"), Title ("T"), remaining titles ("R") DVD-VR [38] Plays or pauses. [7] Stops playing. When touched twice, the disc is played from its beginning when you play it in the next time.
Watching DVD/Video CD DVD-VIDEO Disc Menu Selects an option from the DVD-VIDEO Disc Menu. 1 Display the Playback Screen See (page 16). 2 Display the Menu Control 1 screen ⁄ • Touching the central part of the monitor also turns on the Highlight Control. • To cancel Highlight Control, press the [TEL] button for more than 1 second. • The Highlight Control is cleared automatically after approximately 10 seconds.
[Zoom] Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off ) each time you touch. [2], [3], [5], [∞] Scrolls the screen in the direction you touch. [Return] Returns to the previous screen. [Exit] Exits the Zoom Control screen. DVD-VR Menu Control Selects an option from the DVD-VR Disc Menu. 1 Display the playback screen See (page 16).
Music Disc/ Audio File Listening & Video File/ Picture File Watching You can recall various control screens during playback of CD, audio file, video file and picture file. • See (page 7) for playable discs. • See (page 7), (page 7) or (page 8) for playable files. Source Control Screen Switches to the source control screen to use various playback functions.
[RDM] Starts or stops Random Play (to play files of the present folder in random order). [4Line]/ [2Line] Switches the number of lines displayed in the Information Display. [FOLD]/ [Flist] Displays the folder list. [Plist] Audio File in USB/SD Displays the play list. [SLIDE] Audio File , JPEG Displays images in the folder currently being played one after another. If there is no image in the folder currently being played, initial background is displayed.
Music Disc/ Audio File Listening & Video File/ Picture File Watching Scrolls to the position of the specified initial USB device select Selects the connected USB device (or a partition). 1 Display the Source Control Screen See (page 22). 2 Display the USB Mount Device Select Screen Scrolls to the selected initial. 3 Select a USB device 1 1 Selects a device or partition. [ UP] Returns to the Device Selection screen.
Link search (Audio File in USB/SD) Playback Screen (Video file, Picture file) Searches for another song of the currently selected artist. Basic functions are available even when the playback screen is displayed. 1 Display the Source Control Screen 1 Display the Playback Screen See (page 22). 2 Start Link search See (page 16). 2 Operation on the Playback Screen 2 1 3 4 3 Select a song 1 1 Plays the touched song.
Music Disc/ Audio File Listening & Video File/ Picture File Watching Easy Control Screen (Video file, Picture file) Displays the basic operation buttons on the screen. 1 Display the Easy Control Screen See (page 17). Picture Control Adjusting the video display. 1 Display the Playback Screen See (page 16).
Movie Menu Control Selects an option from the Movie Menu. 1 Display the playback screen See (page 16). 2 Display the Menu Control screen 3 Operation on the Menu Control screen [SUB] Switches the subtitle language. [Audio] Switches the voice language. [Exit] Exits the Menu Control screen. English B64-4512-00_01-M_English.indd 27 27 09.4.
iPod Control You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Playback Screen Easy Control Screen Basic functions are available even when the playback screen is displayed. Displays the basic operation buttons on the screen.
Source Control Screen Switches to the source control screen to use various playback functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen [ARDM] Starts or stops Album Random Play (plays randomly from current album).* [INFO] Displays information screen of music/ video being played. [LINK] MUSIC Searches for another song of the currently selected artist. See (page 30).
iPod Control Scrolls to the position of the specified initial Link search (Music file) Searches for another song of the currently selected artist. 1 Display the Source Control Screen See (page 29). 2 Start Link search Scrolls to the selected initial. 3 Select a song 1 1 Plays the touched song. [ ] When is appeared, the text display is scrolled by touching it. [ TOP] Moves to the top category. [ CUR] Displays the currently playing category.
Radio Listening Various control screens appear in the Tuner Source mode. • Set the remote controller mode switch to "AUD" mode before starting operation, see (page 79). Source Control Screen Multi Function Switches to the source control screen to use various functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control screen 1 [FM] Switches to the FM1/2/3 band. [AM] Switches to the AM band.
Radio Listening [NAME] Sets a name to the station. See (page 34). (Region 4/ 6 models only) [TEXT] FM Displays Radio Text screen. See (page 33). (Region 2/ 3 models only) Auto Memory Stores stations with good reception in memory automatically. 1 Display the Source Control Screen See (page 31). 2 Select a band you wish to store in memory Preset Select Lists and selects memorized station.
Manual Memory Radio Text (Region 2/ 3 models) Stores the current receiving station in memory. You can display the radio text. (Only when receiving the FM broadcast) 1 Display the Source Control Screen See (page 31). 2 Select a station you wish to store in memory 1 Select a station See (page 31). 2 Display the radio text 3 Store in memory 1 2 sec. Continue to touch until the memory number appears.
Radio Listening Set Station Name (Region 4/ 6 models) Assigns a name to a station. 1 Tune in to the station to name See (page 31). 2 Start Name set Traffic Information (Region 2/ 3 models) When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. 1 Display the Source Control Screen See (page 31).
Search by Program Type (Region 2/ 3 models) Frequency Step Setting (Region 4/ 6 models) A program is tuned when you set its program type. (Only when receiving the FM broadcast) Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 Display the Source Control Screen 1 Switch the frequency step See (page 31).
TV Watching Various control screens appear in the TV source mode. You can only operate TV with the optional accessory TV Tuner connected. Function During TV Screen Easy Control Screen Basic functions are available even when the TV screen is displayed. Displays the basic operation buttons on the screen. 1 Display the TV screen 1 Display the Easy Control Screen See (page 16).
Source Control Screen Switches to source control screen to use various functions. 1 Display the Source Control Screen See (page 14). 2 Operation on the Source Control Screen 1 [SEEK] Switches the Seek mode. The mode is switched in the following order each time you touch the button. Display Setting "AUTO1" Tunes in a station with good reception automatically. "AUTO2" Tunes in stations in memory one after another. "MANU" Switches to the next frequency manually.
TV Watching Auto Memory Manual Memory Stores stations with good reception in memory automatically. Stores the current receiving channel in memory. 1 Display the Source Control Screen See (page 37). 1 Display the Source Control Screen See (page 37). 2 Select a band you wish to store in memory 2 Select a station you wish to store in memory 3 Select the Auto Memory mode 3 Store in memory 4 Start Auto Memory 2 sec.
Preset Select Set Station Name Lists and selects memorized station. Assigns a name to a station. 1 Display the Source Control Screen 1 Tune in to the station to name See (page 37). 2 Start Preset Select See (page 37). 2 Start Name set 3 Select a station 1 3 Enter the name See (page 41) for information on how to enter a name. 4 End Name set 1 Memorized stations are displayed. Touch to tune in. [ ] Switches to the TV screen.
Bluetooth Audio Control DNX/ DDX7 models: You can listen to audio files stored in Bluetooth audio player and cell-phone. DDX6 models: When KCA-BT200 (optional accessory) is connected, you can listen to audio files stored in Bluetooth audio player and cell-phone. • You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well.
Other Functions How To Use the Character Entry Screen Character Entry screen External Device Power Supply Control (DNX/ DDX7 models) Controlling the external device power supply. 1 1 Display the Source Select Screen See (page 12). 2 Display the EXT SW Control screen 1 Enters characters. [2], [3] Shifts the cursor. [5], [∞] Scrolls up or down the character button display. [QWE]/ [ABC] Sets the key layout of the character buttons. ABC : Alphabetical key layout.
Other Functions Muting Audio Volume upon Reception of Phone Call When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen When the call ends... Hang up the phone. The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to .
Screen Control Setting the monitor screen. Screen Control 1 Display the Easy Control Screen See (page 17). 2 Display the Screen Control screen "NAV-SYNC": Turning the Dimmer function On or Off according to the Navigation Day/Night display setting. [Mode] Selects a screen mode. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" ⁄ • The Screen Control screen is displayed only when you have applied the parking brake.
Hands Free Unit Control Various functions can be used in the Hands Free control mode. (DDX6 models: with the optional accessory Bluetooth unit connected only) • You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well. • To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your Bluetooth Unit and your cell-phone.
Call Waiting [ [ ] • Answering another incoming call with the current call suspended • Switching between the current call and waiting call Each touch of this button switches the calling party. ] • Answering another incoming call after terminating the current call • Answering the waiting call after terminating the current call Making a Call Displaying the control screen and using various functions.
Hands Free Unit Control Calling by Phonebook Calling by Entering a Phone Number You can call a person using his/her phone number that you have registered in the Phonebook. Makes a call by entering a phone number. 1 Display the Hands-Free Control screen See (page 45). 1 Display the Hands-Free Control screen See (page 45).
3 Select from calls list Example : Outgoing Calls screen When a beep is heard, utter the category within 2 seconds. If there are more than one phone numbers registered under the same name, go to step 4. 4 Select a Phone number category Calls the selected phone number. 4 Make a call ⁄ • The Outgoing Calls list screen, Incoming Calls list, or Missed Calls list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the cell-phone memory.
Hands Free Unit Control Controlling Tone-based Services Setting Up the Hands-Free Phone Uses tone base service using DTMF (Dual Tone Multi Frequency). The Hands-Free system can be set as follows. 1 Display the Talking screen See (page 46). 1 Display the Hands-Free Control screen See (page 45).
[Call Beep] Sets the beep of the incoming call. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. [SMS Receive Beep] Sets the beep of the incoming SMS. ( "ON") "ON": Beep is heard. "OFF": Beep is canceled. [Phone Information Use] Sets whether to use cell-phone phonebook, outgoing calls list, incoming calls list and missed calls list. ( "ON") "ON": Yes. "OFF": No. [SMS Use] Sets the SMS function. ( "ON") "ON": Use SMS function. "OFF": SMS not available.
Hands Free Unit Control 5 Utter the voice to register (2nd try) Utter within 2 seconds after the Beep. 6 End voice registration [Record] Registers voice for the selected Phone number category. [Play] Plays voice registered for the selected Phone number category. [Delete] Deletes voice registered for the selected Phone number category. Touch to display the confirmation screen. Touch [Yes] to delete or [No] to cancel.
Phone Number Preset Registers frequently used phone number to Hands Free control screen preset button. 4 Search phone number to register with each function 5 Register phone number 1 Display the Hands-Free Control screen See (page 45). 2 Select the Preset number to register SMS (Short Message Service) 1 sec. ⁄ • If no Preset number is registered, pressing this button momentarily moves to the step 3. Uses SMS function. 1 Display the Hands-Free Control screen See (page 45).
Hands Free Unit Control 4 Select a message to display 3 Create a message 1 1 1 Calls the number in the selected message. [DISP] Displays the selected message. SMS Message screen Creates a new message for the selected message. Create a message 1 Input the destination 1 Enters characters. [2], [3] Moves the cursor. [5], [∞] Scrolls up or down the character button display. [QWE]/ [ABC] Sets the key layout of the character buttons. ABC : Alphabetical key layout. QWE : Qwerty key layout.
Audio Control Audio Control Menu Audio Control Displays the Audio Control menu to set the sound effect function of this unit. You can adjust the front/rear and right/left audio balance. 1 Display the Source Select Screen 1 Display the Audio Control screen Touch [ SRC ]>[ ] > [Audio Control]. (page 53) 2 Set each item 1 2 Display the Audio Control menu DDX6 models In this manual, the above selection is indicated as: Touch [ ] > [ ].
Audio Control [Bass Boost] Sets the amount of bass boost. (DNX/ DDX7 models only) "OFF"/ "Step1"/ "Step2" [Stream Information] Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, MPEG, MP3, WMA or AAC) is displayed. [SystemQ-Ex] Selects items to be adjusted for tone curve setup. (DDX6 models only) If turned "OFF", only Level can be setup for tone curves. [EQ] Displays the Graphic Equalizer setup screen.
Tone Setup (DDX6 models) Zone Control You can set a Tone curve. You can set the front and rear audio source. 1 Display the Equalizer screen 1 Display the Zone Control screen Touch [ ]>[ ] > [Equalizer]. (page 53) 2 Display the Tone Control screen Touch [ ]>[ ] > [Zone Control]. (page 53) 2 Set the Zone Control 3 Set the Tone [Bass] Bass adjustment items are displayed. [Middle] Middle adjustment items are displayed. [Treble] Treble adjustment items are displayed.
Audio Control Space Enhancer (DNX/ DDX7 models) Position (DNX/ DDX7 models) You can enhance the soundscape. You can adjust the sound effects according to your listening position. 1 Display the Space Enhancer screen Touch [ 53) ]>[ ] > [Space Enhancer]. (page 1 Display the Position screen Touch [ 2 Set the Space Enhancer ]>[ ] > [Position]. (page 53) 2 Set the Position Control 1 1 Sets the soundscape level. ⁄ • You cannot set Space Enhancer in tuner source.
Position DTA Control You can fine-adjust your listening position. 1 Display the Position DTA screen 2 Select a speaker you wish to adjust 1 2 3 4 5 1 Left front speaker 2 Right front speaker 3 Left rear speaker 4 Right rear speaker 5 Subwoofer [2], [3] Finely adjusts the value set with the Position function. [Total DTA] Indicates setup distance.
Setup Menu You can set up various receiver parameters. How to Display SETUP Menu Screen Displays the Setup menu to set various functions. 1 Display the Source Select Screen SRC 2 Display the Setup Menu Screen In this manual, the above selection is indicated as: Touch [ ] > [ ].
DivX Setup Software Information Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management). Checks the software version of this unit. 1 Display the DivX Setup screen 1 Display the Software Information screen ] > [Information] > Touch [ ] > [ [Software]. (page 58) Touch [ ] > [ ] > [Information] > [DivX(R)]. (page 58) Displays the software version. Displays the registration code.
Setup Menu User Interface Language Setting You can setup user interface parameters. You can select the display language for the control screen and audio file tags. 1 Display the User Interface screen ] > [System] > [User Touch [ ] > [ Interface]. (page 58) 2 Set each item 1 Display the User Interface screen Touch [ ] > [ ] > [System] > [User Interface]. (page 58) 2 Display the Language Setting screen 3 Select a language [Beep] Turns the key touch tone On or Off.
Touch Panel Adjustment Clock Setup You can adjust the touch panel operations. You can adjust the clock time. 1 Display the Touch panel Adjustment screen 1 Display the Clock Setup screen Touch [ ] > [ (page 58) ] > [System] > [Touch]. 2 Adjust the Touch panel Touch [ ] > [ (page 58) 2 Setup the Clock 1 Follow the instruction on the screen and touch the center of . [Cancel] Cancels the adjustment and returns to the Touch Panel Adjust screen. [Reset] Resets to the initial status.
Setup Menu Security Setup 5 Register your security code You can set a security code to protect your receiver system against theft. ⁄ 6 Reenter the security code • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Display the Security screen Touch [ ] > [ (page 58) ] > [System] > [Security].
Monitor Angle Control EXT SW Setup You can adjust the position of the monitor. Setting up power specification of the external device for which the power is controlled from this unit. (DNX/ DDX7 models only) 1 Display the Angle Setup screen Touch [ ] > [ (page 58) ] > [System] > [Angle]. 2 Set the Monitor Angle 1 1 Display the EXT SW Setup screen Touch [ ] > [ (page 58) ] > [System] > [EXT SW]. 2 Perform EXT SW Setup 1 Sets the Monitor angle.
Setup Menu Setup Memory Audio Control, AV-IN SETUP, AV Interface, Navigation, and Audio SETUP settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the SETUP Memory screen Touch [ ] > [ ] > [System] > [SETUP Memory].
Entering Background 6 Load the image Loads a image for background. 1 Connect the device which has the image to load 1 2 Display the Background screen ] > [Display] > Touch [ ] > [ [Background]. (page 58) 3 Display the Background Memory screen [Change] Selects a image for background. [Delete] Deletes the background image. Touching the screen displays a confirmation message. Touch [Yes]. To cancel clearing, touch [No]. 4 Select a medium 1 Rotates the image.
Setup Menu Panel Color Coordinate To register your original color Sets the screen and button illumination color. 1 Start the RGB coordinate 1 Display the Color screen Touch [ ] > [ (page 58) ] > [Display] > [Color]. 2 Adjust the each color value 2 Display the Panel Color Coordinate screen 1 [Initialize] Initialization resets the settings made using the Panel Color to the default settings made at the factory.
Screen Adjustment Registering Bluetooth Unit You can adjust the screen mode of the monitor. Registers the Bluetooth unit to be connected. 1 Display the Screen Adjust screen 1 Display the Bluetooth Setup screen Touch [ ] > [ Adjust]. (page 58) ] > [Display] > [Screen 2 Set each item [Bright] Brightness Control [Contrast] Contrast Control [Black] Black Level Adjustment [Dimmer] Dimmer Mode Setup ( "ON") "ON": The display dims. "OFF": The display doesn’t dim.
Setup Menu 4 Select the Bluetooth unit to register 1 Registering Special Bluetooth Unit Registers Special Bluetooth unit that results in error by normal operation by selecting from model name. 1 Display the Special Device List screen 1 Displays the searched Bluetooth unit. [Search] Searches for a Bluetooth unit. [Cancel] Cancels searching of Bluetooth unit. 2 Select a model name 5 Enter PIN code 1 Displays the Bluetooth unit name that can be registered.
Registering Bluetooth Unit PIN Code Bluetooth Unit Connection Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. Selects the Bluetooth unit to connect. 1 Display the Bluetooth Setup screen Touch [ ] > [ (page 58) ] > [Bluetooth SETUP]. 1 Display the Bluetooth Setup screen Touch [ ] > [ (page 58) ] > [Bluetooth SETUP].
Setup Menu AV Input Setup AV Interface Setup You can set AV input parameters. You can set audio and visual (AV) interface parameters. 1 Display the AV-IN Setup screen Touch [ 58) ]>[ ] > [AV-IN SETUP]. (page 2 Set each item [AV-IN Interruption] Sets an image display of the system that is connected via the AV INPUT port. ( "OFF") "OFF": When the image source is switched, an image entered via the AV INPUT port is displayed.
Navigation Setup You can set Navigation parameters. 1 Display the Navigation Setup screen Touch [ ]>[ ] > [Navigation]. (page 58) [On Screen Navigation] Sets an on-screen display of the navigation screen. ( "OFF") (DDX models only) "Auto": Information is displayed for 5 seconds when updated. "OFF": Information is not displayed. 2 Set each item DSP Bypass Control (DNX/DDX7 models) Temporarily bypassing DSP (Digital Signal Processor) System.
Setup Menu Speaker Setup 3 Select a speaker type You can select a speaker type and its size to get the best sound effects. 1 Display the Speaker Select screen Touch [ ] > [ ] > [Audio SETUP] > [Speaker Select]. (page 58) 2 Select a speaker you wish to adjust When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically. DNX/ DDX7 models 1 2 3 DDX6 models You can select any of the following speaker types.
[Phase] Sets the phase of subwoofer output. The phase is reversed 180 degrees when set to "Reverse". Sets the sub woofer phase. (Only when "Subwoofer" is set to "ON" in Audio Setup) (DDX6 models: Only when "Subwoofer" is set to "ON" in Audio Setup and "LPF FREQ" is set to other than "Through") [HPF FREQ] High Pass Filter adjustment. (When front speaker or rear speaker is selected on Speaker Select screen) [LPF FREQ] Low Pass Filter adjustment.
Setup Menu 3 Set a delay time DVD Setup You can set up the DVD play. 1 Display the DVD Setup screen Touch [ ]>[ ] > [DVD SETUP]. (page 58) 2 Set each item Make fine adjustment of the delay time of the speaker output specified at to have a more suitable environment for your vehicle. The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior.
[Screen Ratio] Selects the screen display mode.*1 ( "16:9") "16:9": Displays wide pictures. "4:3 LB": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen). "4:3 PS": Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends). [Parental Level] Displays the Parental Lock screen.*1 ( "OFF") (See , page 75) [Disc SETUP] Makes the settings related to the disc media.
Setup Menu 4 Display the Parental Level SETUP screen Disc Setup Performs setup when using disc media. 1 Display the DVD Setup screen 5 Select a parental level and complete the setup Selects a parental level. ⁄ Touch [ ]>[ ] > [DVD SETUP]. (page 58) 2 Display the Disc Setup screen 3 Set each item • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc.
USB/ SD Setup iPod Setup Performs setup when using USB or SD. Performs setup when using iPod. 1 Display the USB/ SD Setup screen 1 Display the iPod Setup screen Touch [ ] > [ SETUP]. (page 58) ] > [USB SETUP] or [SD Touch [ ]>[ ] > [iPod SETUP]. (page 58) 2 Set each item 2 Set each item Example : USB Setup screen [Picture Display Time] Selects a picture display time. ( "Long") The Display of a JPEG picture is changed.
Setup Menu Tuner Setup (Reagion 2/ 3 models) TV Setup You can set Tuner related parameters. The TV signal receiving areas can be set. 1 Display the Tuner Setup screen 1 Displaying TV SETUP screen Touch [ 58) ]>[ ] > [TUNER SETUP]. (page Touch [ ]>[ ] > [TV SETUP]. (page 58) 2 Set each item 2 Set each item [NEWS] Sets a news bulletin interrupt time.
Remote Controller This unit can be operated using the Remote Controller supplied with this unit. ¤ • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not place the battery near an open flame or heat source. This may cause the battery to explode. • Do not recharge, short, break up or heat the battery or place it in an open fire.
Remote Controller ROUTEM VOICE AV OUT OPEN VIEW MAP DIR O MODE TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM O Cursor key Moves the cursor when displaying menu. ZOOM OUT O O FM+ 2 ZONE D O Y 2ABC 3 DEF 2 ZONE ATT O BS CLEAR 0 DIRECT ATT ENTER O O 1 O Y 2 ZONE D ROUTEM VOICE AV OUT OPEN VIEW MAP DIR CANCEL 4 GHI O Y 2ABC 3 DEF 2 ZONE D O VOL ZOOM O 5JKL 6MNO ENTER R.
VCD 1.X, VCD 2.X (PBC OFF) DVD/VCD (DVD mode) [RC-DV330] Track number Cancel [RC-DV340] Track search and file search Selects the track or file to be played. VIEW O FM+ O O O D O 1 O ANGLE VCD 2.X (PBC ON) O MAP DIR AM− FM+ D OPEN VOL VOL ZOOM AM− O Y 2 ZONE Y 1 2ABC 3 DEF 2ABC 3 DEF 1 1 O 2 ZONE Play/Pause Pauses the track. Press again to resume playing.
Remote Controller ZOOM Switches the zoom ratio each time you press this key. VIEW Direct search R.VOL 7PQRS 8TUV 9WXYZ CLEAR 1 + 0 # BS 4 GHI 5JKL 6MNO R.VOL DIRECT 7PQRS 8TUV 9WXYZ ATT CLEAR 0 DIRECT ATT MAP DIR DISP ANGLE FM+ O O O D O 1 O VOL ZOOM AM− O Y 2 ZONE 2ABC 3 DEF 1 SRC V.SEL MODE FNC/PBC TOP MENU MENU DVD SETUP RETURN AUDIO SUBTITLE ANGLE ZOOM Picture Angle Switches the picture angle each time you press this key.
Radio (AUD mode) NAVI (NAVI mode) [RC-DV340] [RC-DV330] Band switching Switches to bands received by the unit. Joystick Scrolls the map, or moves the cursor. ZOOM MENU O O OPEN VOL O Y 2 ZONE 2ABC 3 DEF 1 FM+ O O AM− VOL ZOOM AM− D Y 1 2 ZONE O O O O FM+ 2 ZONE OUT VOL D Y 1 2ABC 3 DEF O 2ABC 3 DEF 1 O O Y MENU OPEN VOL ZOOM AM− ZOOM O O O 1 AM− D ENTER Performs the selected function.
Remote Controller CANCEL VOICE SUBTITLE ANGLE O ROUTEM MODE/TOP MENU FNC/MENU/PBC ROUTEM OPEN VIEW MAP DIR ANGLE O CANCEL O O O D VOL ZOOM VIEW O O MODE/TOP MENU FNC/MENU/PBC VIEW MAP DIR TV• • NAVI SUBTITLE FM+ D O 1 AM− FM+ D Y OPEN D VOL ZOOM VOL AM− O Y 2 ZONE 1 2ABC 3 DEF 1 O 2ABC 3 DEF 2 ZONE Numeric keypad O O O 84 O 2ABC 3 DEF 1 Y 2 ZONE 2ABC 3 DEF 4GHI 1 5JKL 6MNO 1 4 GHI R.
Initial Setup When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is displayed. Initial Setup 3 End initial setup 1 Turns the power On 2 Set each item ⁄ • The settings above can be changed in (page 58). [Language] Select the language used for the control screen and setting items. (page 60) [Angle] You can adjust the position of the monitor. (page 63) [iPod AV Interface Use] Sets the terminal which iPod is connected.
Status bar Indicator items Shown below is a list of indicators displayed on the Status bar. Source Display Overview General Indicates that the attenuator is active. Turns on the Dual zone function. Indicates that the Loudness control function is ON. Indicates the connection state of the Bluetooth hands-free unit. (Orange: Connected. White: Not connected.) DVD/CD "FO-REP" Indicates that the Folder repeat function is ON. "IN" Indicates that a disc is inserted. (White: A Disc is inside the unit.
DVD Language Codes Code Language Code Language Code Language aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gli gn gu ha he hi hr hu hy ia ie ik id Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. ! ! • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter. • Cannot set up the high pass filter. ▲ Subwoofer is not set to On. ☞ (page 72) ▲ The DSP Select is Bypass. ☞ (page 71) ▲ The Dual zone function is enabled. ☞ (page 55) ▲ The unit is set to STANDBY source.
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. "Protect" : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. ➡ Wire or insulate the speaker cord as appropriate and then push the Reset button. "Hot Error" : When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit.
Specifications Monitor section USB interface section Picture Size : 6.95 inches (diagonal) wide : 156.2 mm (W) x 82.4 mm (H) Display System : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 336,960 (480H x 234V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : Cold Cathode Fluorescent Tube USB Standard : USB 2.
FM tuner section Audio section Frequency Range 200 kHz: 87.9 MHz – 107.9 MHz (Region 4/ 6 models only) 50 kHz: 87.5 MHz – 108.0 MHz Usable Sensitivity (S/N : 30 dB) : 9.3 dBf (0.8 μV/ 75 Ω) Quieting Sensitivity (S/N : 50 dB) : 15.2 dBf (1.6 μV/ 75 Ω) Frequency Response (± 3.0 dB) : 30 Hz – 15 kHz S/N Ratio (dB) : 70 dB (MONO) Selectivity (± 400 kHz) : ≥ 80 dB Stereo Separation : 35 dB (1 kHz) Maximum Power (Front & Rear) : 50 W x 4 Full Bandwidth Power (Front & Rear) (4 Ω, 14.
Specifications Navigation section (DNX models only) Receiver : High-sensitivity GPS receiver Reception Frequency : 1575.42 MHz (C/A code) Acquisition Times Cold : < 38 seconds Factory Reset : < 45 seconds (On average for a stationary receiver with a clear view of the sky) Accuracy Position : < 10 meters typical Velocity : 0.05 m/sec. RMS Position Method : GPS Antenna : External GPS antenna External SW Maximum Power Supply Current : 500 mA General Operating voltage : 14.4 V (10.
The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. About DivX DivX is a popular media technology created by DivX, Inc.
B64-4512-00_01-M_English.indd 94 09.4.
B64-4512-00_01-M_English.indd 95 09.4.
For Turkey Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir. This product complies with Directive, Number 26891 regarding "REGULATION ON THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT".
