GPS NAVIGATION SYSTEM DNX8120 DDX812 DDX8032BT MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System/ DVD Receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents How to read this manual Before Use Basic Operations 4 6 10 Basic Operations 10 Navigation Control 14 iPod Control 34 Using the Navigation System 14 Control of Other Sources While Displaying the Navigation Screen 14 Accessing the SD Memory Card Insertion Slot (DNX8120 only) 16 Watching DVD/VCD & DVD Audio Listening 18 Functions During the Playback Screen 18 Functions When Displaying the Easy Control Panel 19 Functions While Displaying the Control Screen 20 DVD Disc Menu 21 VCD Zoom Contro
Muting Audio Volume upon Reception of Phone call 49 Character Entry How To Use the Character Entry Screen 50 50 Screen Control 51 Setup Menu 64 Setup Menu Audio Setup Speaker Set Up Channel Level DTA Setup Crossover Network Setup DVD Setup Language Setup Parental Level Setup System Setup AV Interface Setup User Interface Direct Source Button Setup Entering Background Background Delete Background Select Touch Panel Adjustment Clock Setup Monitor Setup Security Code Setup Deactivating Security Code iPo
How to read this manual This manual uses illustrations to explain its operations. Seek Mode The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Sets a station selection. The mode is switched in following order each time you touch the button.
English B64-4089-00_00_EN.indb 5 5 08.2.
Before Use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your eyes on the unit’s display when you are driving for any extended period. How to reset your unit • If the unit or the connected unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Notes Navigation units that can be connected to this unit (DDX812/DDX8032BT only) • KNA-G510* • KNA-DV4100 • KNA-DV3100 • KNA-DV2100 * Update the navigation software to the latest version. For how to update the software, refer to the instruction manual of the navigation unit.
Notes About Audio files • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) ⁄ • If music of normal CD and other playback systems are recorded in the same disc, only the playback system recorded at the first setout is played. • Playable disc media CD-R/RW/ROM, DVD±R/RW • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 DVD disc marks Operation regulatory marks Symbol With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual.
Basic Operations E D C B A C B Turns power ON/OFF Switches to the Navigation system Press the button to turn on the power. When the button is pressed and held down for 1 second or more, the power is turned off. Press the button to switch the display to the navigation system screen. E D Attenuates the volume Adjusts the volume Press it to attenuate the volume. Press it again to cancel muting. Playing a USB device When connecting a USB device, playback starts automatically.
C Selecting a source Press it to display the source select screen. Touch the source button to select the source. Full Source Select screen 5 6 7 1 2 8 3 9 4 10 1 11 11 1 Scrolls the source display. 2 Displays the external device control screen. See (page 78). 3 Changes the screen skin each time it is pressed. 4 Displays the Hands Free screen. (page 52) 5 Press for at least 2 seconds to erase the buttons. Touch the screen to redisplay the buttons.
Basic Operations C B A B A Switches to the Hands Free control Switches to the rear view Press it for more than 1 second to the Hands Free control screen. Press it again for more than 1 second to resume the normal display. Press it for more than 1 second to switch to rear view. Press it again for more than 1 second to resume the normal display. ⁄ C • Functions of the [NAV] button can be changed to Display Off function. See (page 72) for the function setting of the [NAV] button.
B Switching the function screen The function control screen switches in the following order each time you press the button. Navigation screen Picture or Video playback screen [FNC] button [FNC] button Easy Control buttons appear. Easy Control buttons appear.
Navigation Control Sets and controls the navigation system function. Using the Navigation System Displays the navigation system screen and makes the navigation function available. Control of Other Sources While Displaying the Navigation Screen Selected source can be controlled while displaying navigation screen.
When "Bluetooth" is selected: time. (DVD play only) 5 Plays or pauses. 6 When touched this area, the source control screen appears. 21 a s d f When "USB" or "iPod" is selected: 7 8 7 iPod 9 P 0:00:05 IN 7 During iPod play : Searches Music or Video. During USB play : Selects a file. 8 Plays or pauses. 9 When touched this area, the source control screen appears. 21 22 23 24 Selects a file. Plays. Pauses. When touched this area, the source control screen appears.
Navigation Control Accessing the SD Memory Card Insertion Slot (DNX8120 only) An SD memory card is used to upgrade the map. 1 Press [SRC] to turn the power on 2 Press [0] to close the panel 3 Press [0] for at least 1 second to fully open the panel ⁄ • See the NAVIGATION SYSTEM's INSTRUCTION MANUAL for the detail upgrade method. 16 DNX8120/DDX812/DDX8032BT B64-4089-00_00_EN.indb 16 08.2.
English B64-4089-00_00_EN.indb 17 17 08.2.
Watching DVD/VCD & DVD Audio Listening You can play DVD/VCD using various functions. • For the basic method of how to watch DVD/VCD, refer to (page 10). • Set the remote controller mode switch to "DVD" mode before starting operation, refer to (page 98). Functions During the Playback Screen Basic functions are available even when the playback screen is displayed.
u Forward Scene/Track Search Area Selects the next scene (when PBC is On) or track (when PBC is Off ). i Backward Scene/Track Search Area Selects the previous scene (when PBC is On) or track (when PBC is Off ). o Zoom Control Button Area Displays the Zoom Control buttons (page 22). ; Information Display Button Area Turn off the information when it is displayed. Functions When Displaying the Easy Control Panel Displays the basic operation buttons on the screen.
Watching DVD/VCD & DVD Audio Listening Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions.
DVD Disc Menu Highlight Control You can select a chapter and title for the DVD Menu screen. When you touch the screen, you can select the DVD menu. Selects an option from the DVD Disc Menu.
Watching DVD/VCD & DVD Audio Listening 9 Calls the Menu Control. p Switches the picture angle. (during program playback only) q Switches the subtitle language. (during program playback only) w Switches the voice language. (during program playback only) e Displays the Zoom Control screen. r Selects a picture. (during DVD Audio play only) t Clears the Disc Menu Control. SUB Displays an enlarged VCD screen.
Music Disc & Audio File Listening You can recall various control screens during CD/Audio file playback. • For the basic method of how to play a music disc/audio file, refer to (page 10). • Refer to (page 7) for playable discs. • Refer to (page 8) for playable files. Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions.
Music Disc & Audio File Listening During Audio file playback 2 4 3 5 1 6 6 8 9 10 12 7 8 11 14 13 18 15 11 16 17 19 20 ; Appears when a disc is inserted. a Repeats to play the music or data of the present folder. s You can search for folders and Audio files through a hierarchy. See (page 25). d Displays music information (such as Tag and content property) of Audio file being played. f Displays the external device control screen.
Set Disc Name Folder Select (Function of Audio File) Assigns a name to a CD. Searches folders and Audio files stored in media and devices according to hierarchy. 1 Play a CD you wish to name 1 Start Folder Select 2 Start Name set 2 Selects a song 3 Enter the name See (page 50) for information on how to enter a name. 2 3 1 4 4 End Name set 2 5 6 1 Lists folders and Audio files Folder opens when touched, and the Audio file is played.
Video File/Picture Watching You can recall various control screens during playback of video file (MPEG 1, MPEG 2 and DivX file) and picture file (JPEG file). 6 Information Display Button Area Turn off the information when it is displayed. Function During Playback Screen Basic functions are available even when the playback screen is displayed. ⁄ • The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated.
Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. 1 While the source is playing, press the [FNC] button Mode:Full DVD MEDIA O 7 8 9 p q w e AV–OUT:AV–IN r t O SCRN 6 y 2 DVD MEDIA P 1 PICTURE 2 0:00:05 IN 3 4 1 5 6 8 6 7 8 9 10 12 13 11 14 18 11 17 16 15 u i o ; a s 19 20 d f is appeared, the text display is When scrolled by pressing it. Fast Forwards or Fast Backwards.
Video File/Picture File Watching Picture Control Folder Select Adjusting the video display. Searches folders and Video files/Pictures stored in media and devices according to hierarchy. 1 Start Picture Control 1 Start Folder Select DVD MEDIA DVD MEDIA Mode:Full 2 AV–OUT:AV–IN P 1 0:00:05 IN 2 Adjust the video display 2 Selects a file Picture Ctrl 2 3 2 3 1 4 1 1 2 3 4 28 Reverses the picture horizontally. Rotates counter clockwise. Rotates clockwise. Ends Picture Control.
Radio Listening Various control screens appear in the Tuner Source mode. • For the basic method of receiver button operations, refer to (page 10). • Set the remote controller mode switch to "AUD" mode before starting operation, refer to (page 98). Functions While Displaying the Control Screen Switches to the source control screen to use various functions. 3 2 1 4 5 6 8 8 7 9 10 11 12 13 14 15 16 1 2 3 4 17 18 19 20 1/2, or Radio Text.
Radio Listening Seek Mode Auto Memory Sets a station selection. Stores stations with good reception in memory automatically. 1 Select a band you wish to store in memory The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually. 2 Select the Auto Memory mode 3 Start Auto Memory Touch or .
# : Press for # seconds. Manual Memory Preset Select Stores the current receiving station in memory. Lists and selects memorized station. 1 Select a station you wish to store in memory 2 Store in memory 1 Start Preset Select 2 Selects a station 2 3 1 1 4 Continue to touch until the memory number appears. 1 Scrolls the list. 2 Memorized stations are displayed. Touch to tune in. 3 Switches the list display name to Station name or Program Service Name. 4 Returns to the original screen.
Radio Listening Radio Text Set Station Name You can display the radio text. (Only when receiving the FM broadcast) Assigns a name to a station. 1 Tune in to the station to name 1 Select a station 2 Start Name set 2 Display the radio text 3 Enter the name See (page 50) for information on how to enter a name. 1 4 End Name set 2 2 3 1 Selects the Program Service Name, Title & Artist name, Station Name, Radio Text Plus, or Radio Text for text display.
# : Press for # seconds. Traffic Information Search for Program Type When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. A program is tuned when you set its program type. (Only when receiving the FM broadcast) 1 Enter Program Type mode 1 Set the Traffice information mode When the traffic bulletin starts... The Traffic Information screen appears automatically.
iPod Control You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP300V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Functions when Displaying the Easy Control Panel Connecting an iPod Connect an iPod to this unit. Displays the basic operation buttons on the screen.
Functions while Displaying the Control Screen Switches to the source control screen to use various playback functions. 17 When Video or picture is playing, press the [FNC] button. Mode:Full iPod AV–OUT:AV–IN O iPod P 0:00:05 IN or 2 4 3 1 5 9 10 6 11 8 7 12 19 20 1 Image picture Switches to the playback screen. If there is no playback screen, wallpaper is displalyed.
iPod Control iPod List Lists and searches music/video contained in the iPod. 1 Display the iPod List 2 Select music/video 2 3 1 4 5 1 6 1 Switches list page. 2 Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it. When is appeared, the text display is scrolled by pressing it. 3 All the music in its category is played. 4 Returns to previous category. 5 Moves to the top category.
USB Device Control You can control and listen to songs in your USB device by simply connecting it to the USB connector of this unit. • For the connection of a USB device, refer to (page 10). Functions while displaying the Control Screen 5 Removes the USB device. When "No Device" is shown, the USB device can be removed safely. If you wish to play it again while the USB device is connected, press it again. 6 Selects a folder. (Only in Folder Select Mode)* 7 Selects a file.
USB Device Control USB List Folder Select Lists and searches music contained in the USB device. Searches folders and Audio files stored in the USB device according to hierarchy. 1 Display the Category List 1 Start Folder Select 2 Select a category 2 Select music 1 2 3 4 2 1 5 2 When is appeared, the text display is scrolled by pressing it. 1 Displays the currently playing category. 2 Returns to the original screen.
TV Watching Various control screens appear in the TV source mode. You can only operate TV with the optional accessory TV Tuner connected. Function During TV Screen Basic functions are available even when the TV screen is displayed. Functions When Displaying the Easy Control Panel Displays the basic operation buttons on the screen.
TV Watching Functions While Displaying the Control Screen Switches to source control screen to use various functions. 1 While the source is playing, press the [FNC] button Mode:Full TV SCRN O AV–OUT:AV–IN O BAND TV 7 Switches to TV1 or TV2. 8 Switches the button display. 9 Selects the Auto Memory mode. See (page 41). p Switches the Seek mode. See (page 41). q Displays the Hands Free screen. (page 52) w Indicates current Seek mode.
Seek Mode Auto Memory Sets a station selection. Stores stations with good reception in memory automatically. 1 Select a band you wish to store in memory The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually.
TV Watching Manual Memory Preset Select Stores the current receiving channel in memory. Lists and selects memorized station. 1 Select a station you wish to store in memory 1 Start Preset Select 2 Store in memory 2 Selects a station 1 Continue to touch until the memory number appears. 42 1 Memorized stations are displayed. Touch to tune in. DNX8120/DDX812/DDX8032BT B64-4089-00_00_EN.indb 42 08.2.
# : Press for # seconds. Set Station Name Assigns a name to a station. 1 Select a station you wish to name 2 Start Name set 3 Enter the name See (page 50) for information on how to enter a name. 4 End Name set English B64-4089-00_00_EN.indb 43 43 08.2.
SIRIUS/XM Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.) • This document uses the SIRIUS display as an example.
Channel Search Channel Memory Specifying the desired category and selecting a channel. Stores the current receiving channel in memory. 1 Select a channel you wish to store in memory 1 Start Channel Search 2 Store in memory 2 Select a category 2 1 3 2 1 Selects a category. Displays the channel screen. 2 Scrolls the category. 3 Displays all channels of all categories. Continue to touch until the memory number appears. 3 Select a channel 5 5 4 6 7 4 Selects a channel.
SIRIUS/XM Control (North American sales area only) # : Press for # seconds. Direct Channel Search Tuning in by entering the desired channel number. 1 Start Direct Channel Search 2 Enter the channel number 1 2 3 1 Enters the channel number. 2 Cancels the direct channel search. 3 Clears the channel number. 3 Tune in the channel 46 DNX8120/DDX812/DDX8032BT B64-4089-00_00_EN.indb 46 08.2.
Bluetooth Audio Control You can listen to audio files stored in Bluetooth audio player and cell-phone. Before Use • You need to register your audio player and cell-phone before using it with this unit. For more details, see (page 86). • If you have registered two or more audio players or cellphones, you need to select one of them. For more details, see (page 88).
External Device Power Supply Control Controlling the external device power supply. External Device Power Supply Control Controlling the external device power supply. 1 Displays the EXT SW Control screen [EXT SW] appears when the control screen of each source or Easy control panel is displayed. 2 Controls the external device power supply 1 1 2 1 You can turn on or off the external device power supply. 2 Returns to the original screen.
Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. Muting Audio Volume upon Reception of Phone Call When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen When the call ends... Hang up the phone. The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory.
Character Entry When you select the Set Station Name mode or others, the following screen appears for character entry. How To Use the Character Entry Screen Character Entry screen 1 1 2 3 3 4 5 6 7 1 Shifts the cursor. 2 Enters characters. 3 Scrolls up or down the character button display. 4 Sets the key layout of the character buttons. ABC : Alphabetical key layout. QWE : Qwerty key layout. 5 Enters a space. If you erase a character, locate the cursor on it and touch this button.
Screen Control Setting the monitor screen. Screen Control Day/Night display setting. 7 Returns to the previous screen. ⁄ 1 Display Easy Control panel • The Screen Control screen is displayed only when you have applied the parking brake. • The picture quality can be set for each source. • You can set image quality of screens such as menu from (page 79) of the .
Hands Free Unit Control Various functions can be used in the Hands Free control mode. Before Use Control Screen Function • To use the Phonebook, it must be downloaded to this unit in advance. For details, see (page 52). • You need to register your cell-phone before using it with this unit. For more details, see (page 86). • If you have registered two or more cell-phones, you need to select one of them.
2 3 4 5 6 7 8 9 p q w : Displays the signal strength.* The more the number of bar segments, the stronger the signal. : Displays the present Auto Answering status : When Auto Answering is on : When Auto Answering is off : Displays the battery drain of the cellphone.* The more the number of bar segments, the higher the battery level. Displays the called phone numbers. If you have registered a phone number in the Phonebook, the destination person name is displayed.
Hands Free Unit Control Calling by Entering a Phone Number Quick Dialing Make a call by entering a phone number. You can register up to 6 phone numbers for quick dialing. 1 Display the number input screen ⁄ • Phone numbers must be registered in advance. See (page 61). 1 Recall the phone number 2 Enter a phone number 1 2 Make a call 2 3 4 1 Calls the entered phone number. 2 Creates an SMS for the entered phone number. See (page 62).
Controlling tone-based services Calling by Phonebook Uses tone base service using DTMF (Dual Tone Multi Frequency). You can call a person using his/her phone number that you have registered in the Phonebook. 1 Display the DTMF input screen Display the Talking screen. See (page 54). 1 Display the Phonebook screen The Initial Input screen appears.
Hands Free Unit Control r Calls the selected phone number. t Creates an SMS for the displayed phone number. See (page 62). y Scrolls the phone number. u Returns to the Name List screen. i Returns to the Hands Free Control screen. Cyrillic alphabet search screen 5 2 А О 2 3 5 Make a call 5 Displays the Phonebook beginning with the name whose first character you have touched.
Making a Call Using Outgoing/Incoming Call Records Calling by Voice Recognition Calls by selecting a phone number from the outgoing or incoming calls list. ⁄ 1 Display the Outgoing Calls or Incoming Calls screen Calls by recognizing the registered voice. • In order to perform voice recognition, voice must be registered in the Phonebook data. See (page 59). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc.
Hands Free Unit Control If you hear another Beep sound: Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number. Setting Up the Hands Free Phone The Hands Free system can be set as follows. 1 Display the Hands Free Setup screen Make a call. ⁄ • If there are more than one phone numbers registered under the same name, and the key word voice is registered for each phone number, you will hear another beep.
5 Sets the beep of the incoming SMS. ( "On") "On": Beep is heard. "Off": Beep is canceled. 6 Returns to the "Hands Free Control" screen. 7 Returns to the "Hands Free Setup 1" screen. 8 Sets whether to use cell-phone phonebook, outgoing calls list and incoming calls list. ( "On") "On": Yes. "Off": No. 9 Sets the SMS function. ( "On") "On": Use SMS function. "Off": SMS not available. p Registers the voice to select phone number category with voice recognition. See (page 60).
Hands Free Unit Control 5 End voice registration Key Word Voice Registration Registers the voice to select the Phone number category by Voice Recognition. 1 Display the Key Word List screen Display the "Hands Free" screen and touch [Setup]. See (page 52). ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation. • Repeat from 1st try if the voice is different from the 1st try.
4 Utter the voice to register (1st try) Phone Number Preset Registers frequently used phone number to Hands Free control screen preset button. 7 1 Display the Hands Free Preset List screen 6 Display the "Hands Free" screen and touch [Setup]. See (page 52) 6 Registers the voice. 7 Cancels voice registration. Utter within 2 seconds after the Beep.
Hands Free Unit Control 9 Registers the currently displayed phone number. p Deletes the currently displayed phone number. q Returns to the previous screen. SMS (Short Message Service) Uses SMS function. 1 Display the SMS Select screen 4 Search phone number to register with each function 5 Register phone number 2 Select a function 1 2 ⁄ 3 • Press [Delete] to delete the registered phone number. 4 5 1 Displays received message list. 2 Displays sent message list. 3 Displays the Message screen.
SMS Message screen 10 11 12 13 12 p Calls the number in the selected message. q Creates a new message for the selected message. w Scrolls the message. e Returns to the previous screen. 4 Create a message 14 15 14 17 17 18 16 19 20 21 22 r Moves the cursor. t Displays remaining number of characters allowed. y Enters character. u Changes keyboard character type. i Sends the message. o Sets the key layout of the character buttons. ABC : Alphabetical key layout. QWE : Qwerty key layout.
Setup Menu You can setup various receiver parameters. Setup Menu Audio Setup Displays the setup menu to set various functions. You can set up the car type and speaker system you use together with this unit. 1 Display the control screen of any source 1 Display the Audio Setup screen Touch Menu" screen (page 64). in the "SETUP ⁄ Touch any source button on the "Source Select" screen.
Speaker Set Up When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically. You can select a speaker type and its size to get the best sound effects. 1 Select a speaker you wish to adjust 1 5 10 9 6 7 2 2 3 3 5 7 8 4 11 5 Selects a speaker to be set. (see , page 65) 6 Sets the use or no use of tweeter. (see , page 65) 7 Selects a speaker type.
Setup Menu Subwoofer: NONE, 6 1/2 inch, 8 inch, 10 inch, 12 inch, 15 inch over ⁄ • Select "NONE" if you have no speakers. • If you set the center speaker to "NONE" even in a short time when you are setting the Surround Control (page 95) to "Bypass+Center", the Surround Control is set to "Bypass" automatically. • If you set the center and rear speakers to "NONE" when you are setting the Surround Control (page 95) to "Dolby PL II", the Surround Control is set to "Bypass" automatically.
DTA Setup You can manually set the sound output timing of each channel. 1 Display the DTA Setup screen When the values of center speaker and front speakers increase, they are virtually moved forward. When the values of rear speakers and subwoofer increase, they are virtually moved backward. 1 2 2 3 1 Selects a speaker to be adjusted. 2 Sets a delay time of the selected speaker. 3 Returns to the Car Type Set Up screen.
Setup Menu on the Speaker Set Up screen. Crossover Network Setup You can set a crossover frequency of speakers. 1 Select the speaker to set the crossover 1 2 2 3 3 5 4 6 1 Sets the High Pass Filter of the center speaker. 2 Sets the High Pass Filter of the front speaker. 3 Sets the High Pass Filter of the rear speaker. 4 Sets the Low Pass Filter of the sub woofer. 5 Switches to the crossover setup screen. 6 Returns to the "SETUP Menu" screen.
DVD Setup 7 8 9 You can setup the DVD play. 10 1 Display the DVD SETUP screen Touch Menu" screen (page 64). 11 in the "SETUP 12 13 2 Setup each item 7 8 9 p Returns to the "DVD SETUP 1" screen. Moves to the "DVD SETUP 3" screen. Sets an angle mark display. ( "On") Selects the screen display mode.*1 ( "16:9") "16:9": Displays wide pictures. "4:3 LB": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen).
Setup Menu Language Setup 18 19 Selects a language you use for the speech and menus. 20 1 Select the language item to set 21 i Returns to the "DVD SETUP 3" screen. o Switches Group Continuous On or Off. ( "Off") If "Off" is selected, the group playback is stopped or menu screen is appeared at the end of the group playback. If "On" is selected, the group playback is continued. ; Switches the Video Mode of a DVD Audio disc On or Off.
Parental Level Setup 4 Select a parental level and complete the setup Sets a parental level. 1 Display the Parental Level code number screen See to (page 69) and touch [Parental Level]. 6 6 7 6 Selects a parental level. 7 Complete the parental level setup and returns to the "DVD SETUP 2" screen. ⁄ 2 Enter the code number 2 1 • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc.
Setup Menu System Setup 7 8 You can setup the system parameters. 9 1 Display the SETUP System screen Touch Menu" screen (page 64). in the "SETUP 10 7 Returns to the "System SETUP 1" screen. 8 Sets the function of the [NAV] button. "V. OFF: Press the [NAV] button for more than 1 second to turn the display off. "R. CAM": Press the [NAV] button for more than 1 second to switch to rear view. 9 Sets whether using DSP function or not when playing DVD-Audio.
AV Interface Setup 7 You can set audio and visual (AV) interface parameters. 8 9 10 11 1 Display the AV Interface screen Touch Menu" screen (page 64). in the "SETUP 2 Setup each item 1 2 3 4 5 6 1 Moves to the "AV Interface 2" screen. 2 Sets a name to be displayed when you select a system that is connected via the AV INPUT1 port. ( "VIDEO1") 3 Sets an image display of the system that is connected via the AV INPUT2 port.
Setup Menu y Mutes the volume during voice guidance of the navigation system. ( "On") When turned "On", the volume level drops for voice guidance. u Sets the voice guidance method of the Navigation system. ( "On") (DNX8120 only) "On" : Voice guidance is On. "Off" : Voice guidance is Off. i Returns to the "SETUP Menu" screen. User Interface You can setup user interface parameters. 1 Display the User Interface screen Touch Menu" screen (page 64).
9 p q w Playback screen. ( "Auto") "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. Sets an on-screen display of the navigation screen. ( "Off") "Auto": Information is displayed for 5 seconds when updated. "Off": Information is not displayed. Sets an on-screen display of the VIDEO1 playback screen. ( "Auto") "Auto": Information is displayed for 5 seconds when updated.
Setup Menu Direct Source Button Setup Entering Background Registers the source displayed in the favorite source screen. Loads a image for background. 1 Connect the device which has the image to load 1 Displays the Direct SRC button Setup screen 2 Display the User Interface screen Touch Menu" screen (page 64). in the "SETUP 3 Display the Background Memory screen See (page 74).
Background Delete Background Select Deletes the background image. Selects a image for background. 1 Display Delete Image Select screen 1 Select Background Change screen 2 Select the image to be deleted 2 Select a image for background 1 2 1 1 Returns to the initial background. 2 Returns to the original screen. 1 Returns to the original screen. 3 Delete the image 3 Set the image as the background 4 Confirm 2 2 Returns to the Pictrue Select screen. English B64-4089-00_00_EN.indb 77 77 08.2.
Setup Menu Touch Panel Adjustment Clock Setup You can adjust the touch panel operations. You can adjust the clock time. 1 Display the Touch panel Adjustment screen Touch Menu" screen (page 64). in the "SETUP 1 Display the Clock Setup screen Touch Menu" screen (page 64). in the "SETUP 2 Setup the Clock 2 Start Touch panel setup 2 3 2 3 1 4 5 6 1 1 Returns to the "SETUP Menu" screen. 3 Adjust the Touch panel 2 3 Follow the instruction on the screen and touch the center of .
Monitor Setup You can adjust the position, picture quality and the screen mode of the monitor. 9 Sets the Monitor angle. p Stores the current monitor angle as the angle during power off. q Returns to the "SETUP Menu" screen. 1 Displaying the Monitor SETUP screen Touch Menu" screen (page 64). in the "SETUP 12 13 14 2 Setup each item 15 1 16 2 17 18 3 4 6 5 1 2 3 4 5 Moves to "Tilt Control" screen. Brightness control Contrast Control Black Level Adjustment Dimmer Mode Setup "ON": The display dims.
Setup Menu o Selects a screen mode of the TV screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" ; Returns to the "Mode Select 1" screen. a Selects a screen mode of the rear view camera (R-CAM) screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" s Returns to the "SETUP Menu" screen. Security Code Setup You can set a security code to protect your receiver system against theft.
4 Register your security code If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code 5 Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation. ⁄ • If you enter a different security code, the screen returns to Step 3 (for the first code entry). 6 Register the security code again You must enter the same security code as that you have entered in Step 3.
Setup Menu Deactivating Security Code iPod Setup To deactivate the Security Code function. Performs setup when using iPod. 1 Display Security Code Setup screen Touch Menu" screen (page 64). 1 Display the iPod SETUP screen in the "SETUP 2 Start to cancel a registration of the Security Code Touch Menu" screen (page 64). in the "SETUP 2 Setup each item 1 2 3 1 Sets the Audio book playback speed. 2 Sets Wide Screen on or off. 3 Returns to the "SETUP Menu" screen.
Sirius Setup Sirius Parental Code Setup You can setup the Parental lock for Sirius. Sets a Sirius Parental code. 1 Display the Sirius Setup screen Touch Menu" screen (page 64). 1 Display the Parental Code screen in the "SETUP 1 2 ⁄ 3 4 1 Sets the Parental lock code. See (Page 83). 2 Switch the Parental lock function on and off. See (Page 84). 3 Sets the channel to set parental lock. See (Page 85).
Setup Menu 4 Confirm the code number Enter the same code number as you input in step 3. Sirius Parental Lock Setup Sets a Sirius Parental Lock function on or off. 1 Display the Parental Code screen Sirius Parental code is now set, and the display returns to SIRIUS SETUP screen. ⁄ • You need to complete beforehand. 2 Enter the code number Enter the same code number as you input in .
Sirius Parental Lock Channel Select 4 Set the parental lock for each channel Selects the channel to enable Sirius Parental lock function. 1 Display the Parental Code screen 7 5 6 6 8 10 9 11 5 Lists the channel. The channel name scrolls by pressing . 6 Scrolls the channel list. 7 Sets the Parental lock function on or off for each channel. You need to input the Parental code to switch the Parental lock function on or off. 8 Displays the sort sequence 9 Switch the sort sequence of the channel list.
Setup Menu Bluetooth Setup Registering Bluetooth Unit Registers and selects Bluetooth unit. Registers the Bluetooth unit to be connected. 1 Display the Bluetooth Setup screen Touch Menu" screen (page 64). 1 Display the Connect Device List screen in the "SETUP 2 Setup each item 1 2 Search for a Bluetooth unit 2 3 1 1 Sets cell-phone for Hands Free and Audio player for Bluetooth Audio. 2 Sets the PIN code of this unit. 3 Returns to the "SETUP Menu" screen.
Registering Bluetooth Unit PIN Code 4 Enter PIN code Enter the PIN code specified for the Bluetooth unit to register. Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. 13 12 1 Display the Receiver PIN Code screen 14 15 w e r t Enters a code number. Cancels registration of PIN code. Enters PIN code. Clears the code number. 2 Enter PIN code ⁄ 2 1 • You can also register from the Bluetooth unit side.
Setup Menu Registering Special Bluetooth Unit Bluetooth Unit Connection Registers Special Bluetooth unit that results in error by normal operation by selecting from model name. Selects the Bluetooth unit to connect. 1 Display the Connect Device List screen 1 Display the Special Device List screen 2 Select a registered Bluetooth unit 2 Select a model name 1 1 2 2 3 3 3 4 1 Displays the Bluetooth unit name that can be registered. 2 Scrolls the name of the Bluetooth unit. 3 Scrolls.
Deleting Bluetooth Unit DivX Setup Deletes the registered Bluetooth unit. Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management). 1 Display the Connect Device List screen 1 Display the DivX Setup screen Touch Menu" screen (page 64). in the "SETUP 2 Select a Bluetooth unit to delete 1 1 Displays the registration code.
Setup Menu Setup Memory 3 Memorize or recall the settings Audio Setup and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. 1 Display the SETUP Memory screen Touch Setup Memory Menu" screen (page 64). in the "SETUP When memorizing the Audio Setup and AV Interface settings: If settings have already been memorized, a confirmation message appears.
EXT SW Setup Setting EXT SW Control 2 (EXT SW2) Setting up power specification of the external device for which the power is controlled from this unit. 1 Display the EXT SW SETUP screen Touch Menu" screen (page 64). in the "SETUP The setup method is the same as "EXT SW1". 2 Perform EXT SW Setup Setting EXT SW Control 1 (EXT SW1) 1 2 3 4 1 Sets the name of the external device. See (page 50) for information on how to enter the name. 2 Sets the power signal output mode.
Audio Control Audio Control Menu Audio Control Displays the Audio Control menu to set the sound effect function of this unit. You can adjust the front/rear and right/left audio balance. 1 Display the control screen of any source 1 Display Audio Control screen Touch in the "Audio Control Menu" screen (page 92). 2 Set the each item Press several times until the control screen appears. 1 4 2 2 Display the Audio Control menu 3 3 4 5 1 Moves to the "Audio Control 2" screen.
• You may not set some models of power amp boost to "+18". See the catalog or instruction manual of power amplifier. Graphic Equalizer Setup You can Manually set the equalizer curve. 1 Display the Parametric Equalizer screen Equalizer Control You can setup the equalizer. 1 Display Equalizer Control Touch in the "Audio Control Menu" screen (page 92). 2 Display the Equalizer screen 1 1 2 3 1 1 Selects an equalizer curve type. You can select any of the following equalizer curves.
Audio Control Zone Control ⁄ You can set the front and rear audio source. • There are following limitations when zone function is set to "On". - There is no output from the subwoofer. -
SRS WOW User Setup Surround Control You can adjust the audio SRS. You can set up the sound field. 1 Display the Audio SRS Adjust screen 1 Display the Surround Control screen Touch in the "Audio Control Menu" screen (page 92). 2 1 1 2 Adjust the Audio SRS 3 4 1 2 1 Sets a sound field. You can select any of the following sound fields. • "Bypass" • "Bypass+Center" • "Dolby PLII Movie" • "Dolby PLII Music" • "Dolby PLII Matrix" 2 Displays the present source information.
Audio Control Surround Control Adjustment Position You can adjust the sound field. You can adjust the sound effects according to your listening position. 1 Display the Surround Control screen 1 Display the Position screen Touch in the "Audio Control Menu" screen (page 92. 1 2 Adjust the sound field 2 3 1 1 2 2 4 1 Sets a listening position. You can select any of "Front R" (Right front), "Front L" (Left front), "Front All" (All front), and "All" (All) positions.
Position Fine Control 3 Set a delay time You can fine-adjust your listening position. 1 Display the Position Fine Control screen 2 1 2 3 4 1 Selects a speaker to be adjusted. 2 Indicates setup distance. The adjusted distance (Position and Position Fine Control values), and the total of the distance adjusted by Car Type Set Up (page 64) and the adjustment distance for position setup are indicated. 3 Adjust the distance to each speaker.
Remote Controller This unit can be operated using the Remote Controller supplied with the unit. ¤ • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. • Do not place the battery near an open flame or heat source. This may cause the battery to explode. • Do not recharge, short, break up or heat the battery or place it in an open fire.
Common operations (AUD mode) Source switching Switches to the source to be played. Display angle Switches the display angle each time it is pressed. ROUTEM DISP AUDIO RETURN CANCEL VOICE AV OUT OPEN VIEW MAP DIR SUBTITLE V.SEL IN ANGLE POSITION FM+ D O OUT O MENU O ZOOM O SRC NAVI O MODE/TOP MENU FNC/MENU/PBC VOL O O O AUD ENTER • DVD • • Volume control Adjusts the volume. Cursor key Moves the cursor when displaying menu.
Remote Controller DVD/DVD Audio/VCD/CD/Audio files (DVD mode) Folder search Selects the folder to be played. ANGLE FM+ O O O D O 1 VOL ZOOM AM− O Y 2 ZONE 2ABC 3 DEF 1 VIEW MAP DIR ANGLE Track number Play time Cancel O FM+ O O O D O 1 * You may not be able to use this function with some discs or scenes. CD Track search and file search Selects the track or file to be played.
VIEW MAP DIR AUDIO RETURN CANCEL ANGLE SUBTITLE ANGLE O FM+ O O AV OUT OPEN VIEW MAP DIR • TV• • O SUBTITLE Switches the subtitle language. NAVI O ROUTEM OPEN VIEW MAP DIR SUBTITLE O O 2 ZONE 2ABC 3 DEF 1 Direct tuning After pressing this key, use the keypad to specify the broadcast station you wish to receive. R.VOL 1 + DIRECT 0 # BS ATT O O O VOL ZOOM Example: 92.
Remote Controller ZOOM IN MODE/TOP MENU FNC/MENU/PBC POSITION O AUD DVD • ZOOM OUT OPEN VIEW MAP DIR AUDIO RETURN CANCEL SUBTITLE ANGLE TV• • AUDIO RETURN VIEW Switches between 2D and 3D map displays. ENTER Performs the selected function.
D TV (TV mode) Switching Band/Video It switches between the station of the TV band to receive and video input. CANCEL VOICE OPEN VIEW MAP DIR SUBTITLE ANGLE O FM+ D O O O O ROUTEM AV OUT ZOOM VOL AM− O Y 2 ZONE Channel Selection The TV channel to receive is selected. VIEW MAP DIR FM+ O O D O O 1 O ANGLE ZOOM VOL AM− O Y 2 ZONE 2ABC 3 DEF Direct tuning (NTSC TV type only) R.
DVD Language Codes Code Language Code Language Code Language aa ab af am ar as ay az ba be bg bh bi bn bo br ca co cs cy da de dz el en eo es et eu fa fi fj fo fr fy ga gd gli gn gu ha he hi hr hu hy ia ie ik id Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. ! ! • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter. • Cannot set up the high pass filter. ▲ Subwoofer is not set to On. ☞
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. Protect : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. Error 07–67: The unit is not operating correctly due to some reason or other. ➡ Push the unit's Reset button. If the "Error 07−67" message does not disappear, see your nearest Kenwood dealer. ➡ Wire or insulate the speaker cord as appropriate and then push the Reset button.
Check Sirius: The unit cannot recognize the connected Sirius Tuner Box. ➡ Check the connection of the Sirius Tuner Box. CH UNAUTHORIZED: The selected channel is not subscribed. OFF AIR: The broadcast of the selected channel has finished. Antenna Error: Something is wrong with the anntena. ➡ Check the connection of the antenna. Acquring Signal: The unit cannot receive any signal. ➡ Move the vehicle to the area where the unit can receive signal. Updating Firmware: Updating the firmware of Sirius tuner.
Specifications Monitor section USB interface section Picture Size : 6.95 inches (diagonal) wide : 156.2 mm (W) x 82.4 mm (H) Display Sytem : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 336,960 (480H x 234V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : Cold Cathode Fluorescent Tube USB Standard : USB 1.1/ 2.
Video section Bluetooth section Color System of External Video Input : NTSC External Video Input Level (mini jack) : 1 Vp-p/ 75 Ω External Audio Max Input Level (mini jack) : 2 V/ 25 kΩ Video Output Level (RCA jacks) : 1 Vp-p/ 75 Ω Audio Output Level (RCA jacks) : 1.2 V/ 10 kΩ Analog RGB input (DDX812/DDX8032BT only) : 0.7 Vp-p/ 75 Ω Technology : Bluetooth Ver.1.2 Certified Frequency : 2.402 – 2.
Specifications Navigation section (DNX8120 only) Receiver : High-sensitivity GPS receiver Reception Frequency : 1575.42 MHz (C/A code) Acquisition Times Cold : < 38 seconds Factory Reset : < 45 seconds (On average for a stationary receiver with a clear view of the sky) Accuracy Position : < 10 meters typical Velocity : 0.05 m/sec. RMS Position Method : GPS Antenna : External GPS antenna General Operating voltage : 14.4 V (10.
2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J.
About DivX DivX is a popular media technology created by DivX, Inc. DivX media Files contain highly compressed video with high visual quality that maintains a relatively small file size. DivX files can also include advanced media features like menus, subtitles, and alternate audio tracks. Many DivX media files are available for download online, and you can create your own using your personal content and easy-to-use tools from DivX.com.