Operation Manual

Basic Operations
19English
Navigation Setup
1
Press the [MENU] button.
 Popup menu appears.
2
Touch [SETUP].
 SETUP Menu screen appears.
3
Touch [Navigation].
 Navigation SETUP screen appears.
4
Set each item as follows.
■ [NAV Mute]
Mutes the volume of rear speakers during
voice guidance of the navigation system.
Default is “ON”.
■ [NAV Interrupt Speaker]
Selects speakers used for voice guidance of
the navigation system.
• [Front L]: Uses the front left side speaker for
voice guidance.
• [Front R]: Uses the front right side speaker
for voice guidance.
• [Front All] (Default): Uses both front
speakers for voice guidance.
■ [NAV Voice Volume]
Adjusts the volume for voice guidance of the
navigation system. Default is “24”.
Inserting the MAP SD
1
Press the [G] button.
2
Touch [OPEN] to the panel fully opens.
3
Insert the SD card into the slot until it
clicks.
Ñ Remove the SD card
1
Press the [G] button.
2
Touch [OPEN] to the panel fully opens.
3
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
4
Press the [G] button.
!B5A-2484-00_18DNX_M_En.indb 19 2018/02/19 20:35