MULTIPLE COMPACT DISC PLAYER CD-224M/DPF-J5010 INSTRUCTION MANUAL KENWOOD CORPORATION This unit is designed for home use only. If the unit is used in a location other than at home, such as in a shop (for commercial use), in a car or in a ship, etc., and is damaged, a service fee may be charged even during the warranty period. This instruction manual is used for two models. Model availability and features (functions) may differ depending on the country and sales area.
Introduction Introduction CD-224M/DPF-J5010 (En) 2 Before applying power Caution : Read this section carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada .................................. AC 120 V only Australia .................................................. AC 240 V only Europe and U.K. ............................................... AC 230 V only *Other countries .............
Introduction CD-224M/DPF-J5010 (En) Special features CD player with 200-disc changer CD-TEXT support Title name registrable Programmed playback Filing functions suitable for a 200-disc changer 3 This unit can accommodate up to 200 discs and can be used like a home jukebox. The text information (disc title, track titles, names of the artists, songwriters, composers, etc.) recorded on the CDs can be easily called and displayed in alphanumerics. (Some Japanese words and text may not be displayed.
Introduction CD-224M/DPF-J5010 (En) Unpacking 4 Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage.
Introduction CD-224M/DPF-J5010 (En) 5 Types of discs playable on this unit ÷ With CD-G (CD Graphics) discs, this unit can play only the audio part. ÷ An 8 cm CD cannot be played back. Disc handling precautions Handling Hold compact discs so that you do not touch the playing surface. Disc Type Disc Size CD (ordinary Compact Disc) 12 cm Audio part of CDV (CD with video) 12 cm Never play a cracked or warped disc During playback, the disc rotates at high speed in the player.
System connections System connections CD-224M/DPF-J5010 (En) 6 Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. Do not plug in the power lead until all connections are completed. Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer referring to “In case of difficulty”.
System connections CD-224M/DPF-J5010 (En) Connection to digital amplifier or MD 7 Connect the DIGITAL OUT (OPTICAL) jack to the digital input jack of the amplifier, DAT recorder, MD recorder, etc., using an optical fiber cable which are commercially available in audio stores. Optical fiber cable ÷ When using an optical fiber cable to connect this unit to a digital amplifier, insert the plug straight into the jack until a snap sound is heard.
Controls and indicators CD-224M/DPF-J5010 (En) 8 Play indicator Text information display (The displays given in this manual are approximations only. They may differ from what actually appears on the display.
Operation of remote control unit CD-224M/DPF-J5010 (En) The keys with the same name as those on the main unit operate the same way as on the main unit. The keys marked * are provided only on the remote control unit. 1 POWER key 2 Input keys for numbers and letters * POWER CONFIRM 5 BEST SELECTION 1 ABC 2 DEF 3 REPEAT GHI 4 JKL 5 MNO 6 RANDOM PRS 7 TUV 8 WXY 9 DISPLAY &()–/ +100 QZ 0 ',:?! +10 6 SET 7 ENTER CHARACTER/ SPACE/ P.
Preparation Preparation CD-224M/DPF-J5010 (En) 10 Up to 200 CDs can be loaded in the carousel. Disc exchange also is possible during playback. Never let your hand or any object enter inside the unit. : Keys and controls used in the operations described on this page. Loading discs in the carousel 1 Switch power ON. Press the POWER ( ) key. STANDBY POWER 2 Open the door panel toward the front. Press PUSH OPEN at the right top of the door panel. 3 Load discs.
Preparation CD-224M/DPF-J5010 (En) 11 Disc replacement Discs can be replaced with the same procedure as “Loading discs in the carousel”. In stopped condition, all discs can be exchanged. However, when the door panel is opened while “DISC DETECTION” is being displayed, it may not be possible to remove the disc which had been played. Accordingly, wait for the “DISC DETECTION” indication to go out before opening the door panel.
Normal play (TRACK mode) Normal play (TRACK mode) CD-224M/DPF-J5010 (En) 12 Preparation ÷ Load discs into the carousel. 0 : Keys and controls used in the operations described on this page. Playing tracks in order from track No.1 Use the following procedure to play a CD in the original order of tracks from track No.1. 1 Select the disc. ∞ DISC SKIP 5 Previous disc Next disc ÷Each press of a key increases (or decreases)the disc number. Holding the key depressed varies the disc numbers successively.
Normal play (TRACK mode) CD-224M/DPF-J5010 (En) Direct disc selection 1 Press the DISC SELECTOR key. DISC SELECTOR 13 Press the numeric keys in the following order... Disc No. 63 : 63 Disc No. 100 : 1)) Within 8 seconds! 2 Input the disc number. How to input numeric values 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PRS 7 TUV 8 WXY 9 As this unit requires input of large numeric values, it adopts a different input method from other KENWOOD products.
Normal play (TRACK mode) CD-224M/DPF-J5010 (En) 14 Preparation 0 ÷ Load discs into the carousel. : Keys and controls used in the operations described on this page. Playback from desired track 1 Select the disc. 1 Select the disc number. Display when disc No. 123 is selected ∞ DISC SKIP 5 Next disc Previous disc D123 1:23 ÷The disc number can be selected directly by using the DISC SELECTOR and numeric keys in place of the DISC SKIP keys.
Displays CD-224M/DPF-J5010 (En) Displays scrolling 15 Some track titles contain so much text information that the full titles will not fit on the display. In cases like this, the letters on the display move from right to left so that the non-visible part of the title is revealed. This type of display movement is known as “scrolling display.” Display example |Scroll display D 1 2 3 G O O D T O L D 3 F A S H I ON... D 12 3 FA S H IONE DH : Keys and controls used in the operations described on this page.
Programming tracks in desired order (PGM mode) Programming tracks in desired order (PGM mode) CD-224M/DPF-J5010 (En) 16 Use the following procedure to select desired tracks (up to 32 tracks) from up to 200 discs and program them in the desired order. Preparation ÷ Load discs into the carousel. ÷ Set the CD player to stop mode. 0 : Keys and controls used in the operations described on this page. 1 Press so that the PGM indicator lights. CHARACTER/ P.MODE P GM 3 S EL E C T1DI SC 2 Select the disc.
Programming tracks in desired order (PGM mode) CD-224M/DPF-J5010 (En) 17 : Keys and controls used in the operations described on this page. To check the programmed tracks SPACE/ CHECK P GM 0 1 ED D 2 0 0DT 03 ÷ Each time the key is pressed, the program No. (P-NO) and the disc No. are displayed. ÷ The previous display resumes in a few seconds. To add a track to the program 1 Set the CD player to stop mode. 2 Perform steps 2 and 3 of “Programming tracks in desired order”.^ ÷ When a track No.
Repeated playback (REPEAT mode) Programming tracks in desired order (PGM mode) CD-224M/DPF-J5010 (En) 18 Preparation ÷ Load discs into the carousel. 0 : Keys and controls used in the operations described on this page. To repeat only the desired tracks 1 Program the desired tracks by performing steps 1 to 3 of “Programming tracks in desired order”. ÷ Up to 32 tracks can be programmed by repeating steps 1. ^ P GR E P EA T 2 ONDT 03 2 Switch REPEAT ON.
Playback in a random order (RANDOM mode) Programming tracks in desired order (PGM mode) CD-224M/DPF-J5010 (En) Use the following procedure to activate random playback which selects a track at random after every track. This feature may allow you to play CDs for long hours without getting tired of. Preparation 19 0 ÷ Load discs into the carousel. : Keys and controls used in the operations described on this page. that the unit is in the normal play TRACK 1 Check # mode. 2 Select discs.
Registration of Title Name Registration of Title Name CD-224M/DPF-J5010 (En) 20 For discs not corresponding to CD-TEXT, a title name can be given to the disc (max. 25 characters). Operation is possible also when the door panel is open. It is convenient to register titles while discs are being inserted. Preparation ÷ Load discs into the carousel. 0 ÷ Set the CD player to stop mode. ÷ Check that the unit is in the normal play TRACK mode.
Registration of Title Name CD-224M/DPF-J5010 (En) In regard to disc information reading 21 The entered title name is read in to the disc with the following timing. ÷ When the door panel is closed. ÷ With closed door panel, when title name mode is cancelled. The display flashes. DDISCCREADING3 When there are discs for which the disc information already has been read in, there may be no display. Do not move or exchange discs until the disc information has been read in. 3 Enter the disc title.
Registration of Title Name CD-224M/DPF-J5010 (En) 22 Preparation 0 ÷ Close the door panel. : Keys and controls used in the operations described on this page. To change or delete a title name steps 1 and 2 of “Assigning Title 1 Perform ) Names”. 2 Change or delete characters one by one. Change ÷ Call the disc to be changed. ÷ Deletion mode is cancelled when the MODE key is pressed. 1 Select overwrite or insert mode. INSERT £ 2 Move the cursor to the desired character (to be changed).
Registration of Title Name CD-224M/DPF-J5010 (En) 23 : Keys and controls used in the operations described on this page. 3 Execute title change or deletion. To quit title name mode ENTER Press the MODE key.
Listening to music by genre (MUSIC TYPE mode) Listening to music by genre (MUSIC TYPE mode) CD-224M/DPF-J5010 (En) 24 Discs can be registered separately by 26 types of music genres. Preparation ÷ Load discs into the carousel. 0 ÷ Close the door panel. 0 ÷ Set the CD player to stop mode. ÷ Check that the unit is in the normal play TRACK mode. # : Keys and controls used in the operations described on this page. Registration of music type files 1 Activate the music type mode. 1 Press the MODE key.
Listening to music by genre (MUSIC TYPE mode) CD-224M/DPF-J5010 (En) In regard to disc information reading 25 The entered music type is read in to the disc with the following timing. ÷ When that disc is played. ÷When ALL DATA READ is executed. ! Do not move or exchange discs until the disc information has been read in. 3 Select the music type.
Listening to music by genre (MUSIC TYPE mode) CD-224M/DPF-J5010 (En) 26 When music types have been registered for the discs, it is possible to enjoy playback of discs of the selected music type. Random playback for a selected music type also is possible. Preparation ÷ Load discs into the carousel. 0 ÷ Register music type files. ¢ ÷ Check that the unit is in the normal play TRACK mode. # ÷ Set the CD player to stop mode. : Keys and controls used in the operations described on this page.
Listening to your favorite titles (BEST SELECTION mode) Listening to your favorite titles (BEST SELECTION mode) CD-224M/DPF-J5010 (En) You can select only your favorite titles and register them as the best selection. Use the following procedure to register favorite tracks in the best selection file while playing a CD. Preparation ÷ Load discs into the carousel. 27 0 : Keys and controls used in the operations described on this page.
Listening to your favorite titles (BEST SELECTION mode) CD-224M/DPF-J5010 (En) 28 You can listen to only your favorite titles registered as the best selection. Preparation ÷ Load discs into the carousel. 0 ÷ Register tracks in the best selection file. ¶ ÷ Check that the unit is in the normal play TRACK mode. # ÷ Set the CD player to stop mode. : Keys and controls used in the operations described on this page.
Timer operation Timer operation CD-224M/DPF-J5010 (En) As this unit incorporate the timer standby function, playback can be started at desired moment if a commercially available audio timer is combined with this unit. Preparation Audio timer 12:00 To AC outlet Amplifier or receiver ÷ Load discs into the carousel. 0 ÷ Close the door panel. 0 ÷ Connect the system components so that their power can be switched on by the timer. ÷ Read the instruction manual of the timer carefully.
Important items CD-224M/DPF-J5010 (En) 30 Cleaning Periodic inspection Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth. This unit incorporates an optical pickup which is a precision device. It is recommended to have this unit inspected periodically to clear the pickup after about 1000 hours of use, although this period may vary depending on the installation condition (temperature, humidity, dust, smoke, etc.
In case of difficulty CD-224M/DPF-J5010 (En) Operation to reset To reset the registered contents The microcomputer may malfunction (impossibility to operate, erroneous display, etc.) when the connection cords are unplugged while power is ON or due to an external factor. In this case, execute the following method to reset the microcomputer and return it to normal condition. The registered contents for title name, music type, and best selection can be reset by the following procedure.
Specifications CD-224M/DPF-J5010 (En) 32 [Format] System ......................................... Compact disc digital audio system Laser .................................................................... Semiconductor laser [D/A Convertors] D/A Conversion .............................................................................. 1 Bit Oversampling ............................................................... 8 fs (352.8 kHz) [Audio] Frequency response ........................................
