DPX794BH DPX594BT DPX560BT DPX524BT DPX504BT DPX304MBT DUAL DIN SIZED CD RECEIVER DUAL DIN SIZED DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL INSTRUCTION MANUAL RECEPTEUR CD FORMAT DUAL DIN AUTORADIO MULTIMÉDIA NUMÉRIQUE DEUX DIN MODE D’EMPLOI MODE D’EMPLOI RECEPTOR DUAL DE CD TAMAÑO DIN RECEPTOR DE MEDIOS DIGITALES TAMAÑO DOBLE DIN MANUAL DE INSTRUCCIONES MANUAL DE INSTRUCCIONES For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty ca
(For / / / / ) CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVCKENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
IC (Industry Canada) Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
Article 4 Right pertaining to the Licensed Software Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any related documents. Article 5 1. 2. 2.
Important Notice concerning the Software -jansson Copyright (c) 2009-2012 Petri Lehtinen
sha2 AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/ Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved.
T-Kernel 2.0 This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum (www.tron.org) BSD-3-Clause Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved. You may obtain a copy of the license at https://opensource.org/licenses/BSD-3-Clause THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
Contents Before Use ................................................................................................. 3 Audio Settings........................................................................................ 29 Basics ......................................................................................................... 4 Display Settings ..................................................................................... 33 Getting Started .............................................
Before Use IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warnings and Cautions in this manual. • Please keep the manual in a safe and accessible place for future reference. WARNING • Do not operate any function that takes your attention away from safe driving. • Do not ingest the battery, Chemical Burn Hazard. The remote control supplied with this product contains a coin/button cell battery.
Basics Faceplate How to reset Loading slot Display window*1 Eject button *1 Only for illustration purpose. *2 For : You can also turn off the display information by pressing DISP repeatedly. (Page 42) : USB cable from the rear of the unit (USB input terminal). Volume knob To On the faceplate Turn on the power Press B SRC. • Press and hold to turn off the power. Adjust the volume Turn the volume knob. Select a source • Press B SRC repeatedly.
Getting Started Basics Remote control (RC-406) (supplied for ) Remote sensor (Do not expose to bright sunlight.) Pull out the insulation sheet when using for the first time. / / / / : Can be remotely controlled with an optionally purchased remote control.
Getting Started Default: [XX] 2 Set the clock and date [DISPLAY] 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [CLOCK], then press the knob. [EASY MENU] When entering [FUNCTION]... [ON]: [LCD DISPLAY] illumination changes to white color. ; [OFF]: [LCD DISPLAY] illumination remains as [COLOR SELECT] color. (Page 33) • [KEY 1] and [KEY 2] illuminations change to light blue color when you enter [FUNCTION], irregardless of the [EASY MENU] setting.
HD Radio™ Tuner (for Getting Started [CD READ] (Except for ) [1]: Automatically distinguishes between audio file disc and music CD. ; [2]: Forces to play as a music CD. No sound can be heard if an audio file disc is played. [USER S.REMO] (For ) See page 34 for details. ) You can tune in to both conventional and HD Radio broadcasts. • To find HD Radio stations in your area, visit .
HD Radio™ Tuner (for ) Direct Access Tuning (using the remote control) 1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a station frequency or channel number. 3 Press ENT IW to search for station or channel. • To cancel, press or DIRECT. • If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled. Select an HD Radio multicast channel Many HD Radio stations offer more than one channel programming.
HD Radio™ Tuner (for Radio (for ) / / / / ) Default: [XX] [TUNER SETTING] [SEEK MODE] Selects the searching method for S / T buttons when pressed. [AUTO1]: Automatically search for a station or channel. ; [AUTO2]: Search for a preset station or channel. ; [MANUAL]: Manually search for a station or channel. [IF BAND] [AUTO]: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.
Radio (for / / / / ) Direct Access Tuning (using the remote control) [NEWS SET] 1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a station frequency. 3 Press ENT IW to search for a station. (For ) [ON]: The unit will temporarily switch to News Programme if available. ; [OFF]: Cancels. [REGIONAL] • To cancel, press or DIRECT. • If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled.
CD/USB/iPod Insert a disc (except for Connect an iPod/iPhone ) Label side Eject disc USB input terminal iPod/ iPhone KCA-iP103 (optional accessory)*1 or accessory of the iPod/iPhone*2 (For ) You can also connect to the USB cable from the rear of the unit (USB input terminal). The source changes to iPod FRONT/iPod REAR/iPod USB automatically and playback starts. • You can also connect iPod/iPhone via Bluetooth. (Page 22) The source changes to CD automatically and playback starts.
CD/USB/iPod To On the faceplate On the remote control You can also select the music drive from the [FUNCTION] menu. Play back/pause Press 6 IW. Press ENT IW. Reverse/ Fast-forward Press and hold S / T. Press and hold S / T (+). 1 2 3 4 Select a track/file Press S / T. Press S / T (+). Select a folder*1 Press 1 /2 Press #FM+/ AM–. Repeat play*2 Press 4 repeatedly. Random play*2 .
CD/USB/iPod Select a file to play From a folder or list • For iPod, applicable only when [MODE OFF] is selected. (Page 12) 1 Press . 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob. Selected file starts playing. [SKIP SEARCH] setting 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [USB], then press the knob. 3 Turn the volume knob to select [SKIP SEARCH], then press the knob.
Pandora® (for / / / / You can listen to Pandora on iPhone/iPod touch (via Bluetooth or via USB input terminal) or Android device (via Bluetooth). Preparation: • Install the latest version of the Pandora application on your device (iPhone/iPod touch or Android device), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. (Page 6) To On the faceplate On the remote control Play back/pause Press 6 IW. Press ENT IW. Skip a track Press T.
(for Pandora® / / / / ) Bookmark current song information Press and hold the volume knob. “BOOKMARKED” appears and the information is stored to your device. • The bookmark is available on your Pandora account but not on this unit. Delete a station Spotify You can listen to Spotify on iPhone/iPod touch (via Bluetooth or via USB input terminal) or Android device (via Bluetooth) (page 22).
Spotify To On the faceplate On the remote control Play back/pause Press 6 IW. Press ENT IW. Skip a track Press S*1 / T. Press S*1 / T (+). Select thumbs up or thumbs down *2 Press 1 Start radio Press and hold 5. Repeat play*3 Press 4 Random play*3 Search for a song or station . 1 Press 2 Turn the volume knob to select a list type, then press the knob. [REPEAT ALL]/[REPEAT ONE]*1/ ( Not available ) [REPEAT OFF] The list types displayed differ depending on the information sent from Spotify.
SiriusXM® Radio (for / / / Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. • For more information, visit . Preparation: 1 Connect the optional SiriusXM Vehicle Tuner (commercially available).
SiriusXM® Radio (for / / / ) SiriusXM Keymode SmartFavorites and TuneStart™ Press and hold the volume knob to change the keymode (channel or replay). (Default: Channel keymode) “ ” indicator lights up when replay keymode is selected. When channel keymode is selected... To On the faceplate On the remote control Select a channel Press S / T. Press S / T (+). Change a channel rapidly Press and hold S / T. Press and hold S / T (+).
SiriusXM® Radio (for / / / ) SiriusXM settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. [LOCK SETTING] [MATURE CH]: Selects the SiriusXM-defined lock setting. ; [USER DEFINED]: Selects the individual channels the user wants to lock. ; [OFF]: Cancels. [CHANNEL EDIT]*1 1 Turn the volume knob to select a category, then press the knob.
AUX Using Other Applications You can listen to music from a portable audio player via the auxiliary input jack. KENWOOD Remote application Preparation: Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 6) Start listening 1 Connect a portable audio player (commercially available). You can control the KENWOOD car receiver from iPhone/iPod touch (via Bluetooth or via USB input terminal) or Android device (via Bluetooth) using KENWOOD Remote application. • For more information, visit
Using Other Applications Settings to use KENWOOD Remote application [STATUS] 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. To return to the previous setting item, press . Shows the status of the selected device.
Bluetooth® • Depending on the Bluetooth version, operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit. • Be sure to turn on the Bluetooth function of the device to make the following operations. • Signal conditions vary depending on the surroundings.
Bluetooth® Auto Pairing When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to [ON]. (Page 26) Press the volume knob to pair once you have confirmed the device name. Bluetooth — Mobile phone The following operations may differ or be unavailable depending on the connected phone. To On the faceplate On the remote control Answer a call Press or the volume knob or one of the number buttons (1 to 6). Press .
Bluetooth® To Adjust the phone volume*1 [00] to [35] (Default: [15]) Switch between handsfree and private talk modes*2 On the faceplate On the remote control Turn the volume knob during a call. Press VOL or VOL during a call. • Press and hold VOL to continuously increase the volume to 15. Press 6 IW during a call. press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.
Bluetooth® [CALL HISTORY] [PHONE BOOK] (Applicable only if the phone supports PBAP.) 1 Press the volume knob to select a name or a phone number. • “INCOMING,” “OUTGOING” or “MISSED” is shown on the lower part of the display to indicate the previous call status. • Press DISP to change the display category (NUMBER or NAME). • “NO DATA” appears if there is no recorded call history or call number. 2 Press the volume knob to call. (Applicable only if the phone supports PBAP.
Bluetooth® Make a call to a registered number 1 Press to enter Bluetooth mode. 2 Press one of the number buttons (1 to 6). 3 Press the volume knob to call. [RECONNECT] [ON]: The unit is automatically reconnect when the last connected Bluetooth device is within the connectable range. ; [OFF]: Cancels. [AUTO PAIRING] [ON]: The unit is automatically paired with the supported Bluetooth device (iPhone/iPod touch) when it is connected through USB input terminal.
Bluetooth® Bluetooth — Audio To On the faceplate Repeat play Press 4 repeatedly. [ALL REPEAT]/[FILE REPEAT]/[GROUP REPEAT]*/ [REPEAT OFF] Random play Press and hold 3 to select [ALL RANDOM] or [GROUP RANDOM]*. Select a file from a folder/list Refer to “Select a file to play” on page 13. Switch between connected Bluetooth audio devices Press 5. (Pressing the “Play” key on the connected device itself also causes switching of sound output from the device.
AMAZON ALEXA (for / / / Alexa is the cloud-based voice service developed by Amazon. You can ask Alexa to play music, get weather reports, traffic information, control smart home devices, shop on Amazon, search the internet, set reminders and more. Preparation: • Create an account at . • Install the latest version of the Alexa mobile application on your device (iPhone/iPod touch or Android device), then log in to the application.
(for AMAZON ALEXA / / / / ) Audio Settings 1 Press on the unit to speak with Alexa. The display shows: “ALEXA” “LISTENING...”. 2 Communicate with Alexa via the connected microphone. (Page 22) “THINKING...” appears when Alexa is processing your voice input. “SPEAKING...” appears while Alexa is responding to your voice input. “ALEXA” or display information such as playing time, song title, etc. appears while Alexa is in idle state.
Audio Settings [MANUAL EQ] [62.5HZ] Adjusts your own sound settings for each source. • The settings are stored to [USER] in [PRESET EQ]. • The settings made may affect the current settings of [EASY EQ]. [LEVEL] [LEVEL –9] to [LEVEL +9] ([LEVEL 0]): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.) [SOUND EFFECT] [SOUND RECNSTR] (Sound reconstruction) (Not applicable for RADIO source, AUX source and SIRIUS XM source.
Audio Settings [X ‘ OVER] [TWEETER] [FRONT HPF] [REAR HPF] [FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/ [6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]: Adjusts the crossover frequency for the tweeter speaker. [GAIN LEFT] [–8] to [0]: Adjusts the output volume of the left tweeter. [GAIN RIGHT] [–8] to [0]: Adjusts the output volume of the right tweeter.
Audio Settings Digital Time Alignment settings Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle. • For more information, see the following “Determining the delay time automatically”.
Display Settings Zone identification for color settings and brightness settings Default: [XX] [DISPLAY] [COLOR SELECT] Selects illumination colors for [ALL ZONE], [LCD DISPLAY], [KEY 1] and [KEY 2] separately. 1 Select a zone. (See the illustration on left column.) 2 Select a preset color for the selected zone. (Page 34) Default: [VARIABLE SCAN] To make your own color, select [CUSTOM R/G/B]. The color you have made will be stored in [CUSTOM R/G/B].
Display Settings [CLOCK] [CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is turned off. ; [OFF]: Cancels. [DEMO MODE] [ON]: Activates the display demonstration automatically if no operation is done for about 15 seconds. ; [OFF]: Deactivates.
Learning Steering Remote Control (for ) 7 Press and hold any control keys on your steering remote control which you want to assign. A list of key functions will appear on the display. [NONE] (default)/[ATT]/[SEEK UP]/[SEEK DOWN]/[VOL UP]/[VOL DOWN]/[MODE]/ [ON HOOK]/[OFF HOOK]/[VOICE]/[ENTER] 8 Turn the volume knob to select a function to assign, then press the knob. The selected key function is assigned to the steering remote control key you have selected in step 7.
Installation/Connection Part list for installation (Parts supplied for / (A) Mounting sleeve ( ×1 ) / ) (B) Trim plate ( ×1 ) Basic procedure 1 Remove the key from the ignition switch, then disconnect the terminal of the car battery. 2 Connect the wires properly. See “Wiring connection” on page 38. 3 Install the unit to your car. See the following “Installing the unit (in-dash mounting)”. 4 Connect the terminal of the car battery. 5 Press B SRC to turn on the power. 6 Reset the unit.
Installation/Connection Installing in Toyota cars (For / / Installing the unit (without mounting sleeve) ) Install onto the car brackets using screws (E) or (F) (supplied). Use the mounting holes ( ) or ( ) that fit the car brackets. Then, install the supplied trim plate (C). Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied). • For / / : Remove the mounting sleeve and trim plate from the unit before installing.
Installation/Connection Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Fuse (10 A) Antenna terminal White To front speaker (left) Gray To front speaker (right) If no connections are made, do not let the wire come out from the tab.
Installation/Connection (For Connect external components (For / / / / ) ) No Part 1 For : USB cable (DC 5 V 2 For : Learning steering remote control (Page 34) 3 For / / : Expansion port (12 V 500 mA): To the optional SiriusXM Vehicle Tuner (commercially available) (Page 17) 4 Microphone input jack (Page 22) 5 Output terminals REAR: Rear output FRONT: Front output SW: Subwoofer output • When connecting an external amplifier to the output terminals of this unit, securely connect the ampli
References Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth. Handling discs • Do not touch the recording surface of the disc. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • Do not use any accessories for the disc. • Clean from the center of the disc and move outward. • Clean the disc with a dry silicone or soft cloth. Do not use any solvents. • When removing a disc from this unit, pull it out horizontally.
References About Pandora • Pandora is only available in certain countries. For more information, visit . • Because Pandora is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired, or some or all of the services may become unavailable. • Some functions of Pandora cannot be operated from this unit. • For issues using the application, please contact Pandora at .
References Change the display information Each time you press DISP, the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name) appears or display will be blank.
Troubleshooting General Sound cannot be heard. “MISWIRING CHECK WIRING THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. “PROTECTING SEND SERVICE” appears. Send the unit to the nearest service center. Source cannot be selected. Check the [SOURCE SELECT] setting. (Page 6) The unit does not work at all. Reset the unit. (Page 4) HD Radio Tuner/Radio Correct characters are not displayed.
Troubleshooting Remedy “COPY PRO” A copy-protected file is played (disc/USB). “CONNECTING” “NO DEVICE” Connect a device (USB/iPod/iPhone), and change the source to USB/iPod FRONT/iPod REAR/iPod USB again. “NO MUSIC” Connect a device (USB/iPod/iPhone) that contains playable audio files. USB is disconnected from the head unit. Please make sure the device is connected properly through USB. • Connected via USB input terminal: The device is connecting to the head unit. Please wait.
Troubleshooting Bluetooth® “CODE ERROR” Remedy Symptom Make sure you have entered the correct pass code. (Page 19) “NO CONTENT” There is insufficient content to start TuneScan. “SCAN CANCEL” TuneScan has been aborted. No Bluetooth device is detected. • Search from the Bluetooth device again. • Reset the unit. (Page 4) Bluetooth pairing cannot be made. • Make sure you have entered the same PIN code to both the unit and Bluetooth device.
Specifications Troubleshooting Remedy No response from Alexa after the voice input. Amazon cloud was unable to analyze the voice input. Wrong response from Alexa. Alexa misunderstood what was said or did not catch the entire request or sentence spoken. Please try again. (Page 28) “DISCONNECTED” Not able to connect or reconnect to Alexa mobile application. : FM Be sure to connect your smartphone to the unit via Bluetooth. (Page 22) • Be sure the audio device is connected via Bluetooth.
Specifications / FM / Frequency Range / / : / / : 87.9 MHz — 107.9 MHz (200 kHz step) / AM Usable Sensitivity (S/N = 30 dB) 8.2 dBf (0.71 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.
Auxiliary Bluetooth 48 USB Standard USB 1.1, USB 2.0 (High speed) Maximum Output Power 50 W × 4 File System FAT12/16/32 22 W × 4 Maximum Supply Current DC 5 V Full Bandwidth Power (at less than 1 % THD) MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 Speaker Impedance 4Ω—8Ω Tone Action Band 1: 62.5 Hz ±9 dB Band 2: 100 Hz ±9 dB Band 3: 160 Hz ±9 dB Band 4: 250 Hz ±9 dB Band 5: 400 Hz ±9 dB Band 6: 630 Hz ±9 dB Band 7: 1 kHz ±9 dB Band 8: 1.6 kHz ±9 dB Band 9: 2.
Specifications Operating Voltage 12 V DC car battery Installation Size (W × H × D) / / 182 mm × 111 mm × 156 mm (7-3/16" × 4-3/8" × 6-1/8") : General / : 178 mm × 100 mm × 156 mm (7” × 3-15/16” × 6-1/8”) : 178 mm × 100 mm × 100 mm (7” × 3-15/16” × 3-15/16”) Net Weight : 1.7 kg (3.8 lbs) (includes Trimplate, Mounting Sleeve) / : 1.6 kg (3.5 lbs) (includes Trimplate, Mounting Sleeve) / 1.3 kg (2.9 lbs) : : 0.8 kg (1.8 lbs) Subject to change without notice. ENGLISH JS_KWD_DPX794BH_KN_EN.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For patents see http://dts.com/patents. HD Radio™ and the HD, HD Radio, and “ARC” logos are registered trademarks or trademarks of iBiquity Digital Corporation in the United States and/or other countries.
ENGLISH FRANC::AIS ESPANOL - DPX794BH DPX594BT DPX560BT DPX524BT DPX504BT DPX304MBT DUAL DIN SIZED CD RECEIVER DUAL DIN SIZED DIGITAL MEDIA RECEIVER Quick Start Guide Quick Start Guide RECEPTEUR CD FORMAT DUAL DIN AUTORADIO MULTIM£DIA NUM£RIQUE DEUX DIN Guide de demarrage rapide Guide de demarrage rapide RECEPTOR DUAL DE CD TAMANO DIN RECEPTOR DE MEDIOS DIGITALES TAMAf:,O DOBLE DIN Guia de inicio rapido Gura de inicio rapido JVCKENWOOD Corporation For your records Record the serial number, f
(For l•J:ftAllilll/lURae111=1■,11Ji!t.id•l=IIIl•Jif!J.tll:Q1l 1Jftl.i•!l=IIJ FCC CAUTION CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void theuser's authority to operate the equipment. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
IC (Industry Canada) Caution SOFTWARE LICENSE AGREEMENT This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
) Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder ofthe right who granted to the Licensor the license or sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be entitled to any right oth~ than the license granted hereunder, in respect of the Licensed Software and any r~ated documents. ' 1.
• Important Notice concerning the Software -cMP -jansson The MIT License (MITI Copyright (c) 2014 Charles Gunyon ' Copyright (c) 2009-2012 Petri Lehtinen
Installation/Connection This section is for the professional installer. For safety's sake, leave wiring and r:nounting to professionals. Consult the car audio dealer. A WARNING • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery's negative terminal before wiring and mounting.
Installing the unit (without mounting sleeve) 1 For 111ttfP!1:m,1•)i!f.isat:~1■,111:£c.'f,l1:j■: Remove the ..:iounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied). Wiring connection • (For l•lttfill:l#l1l1Ji,'f.iill=li' l•lA!C.1d1 l:l■ 1 l•J:tc.tll=li/l....•l...i-:c;-:11-11-=1■.1 Antenna terminal {For l•lttill!l&l=II) Wxm (3/8')I¥::~ MSmm MS mm 4 Use only the specified screws.
Before Use ... ···· IMPORTANT Basics ~ Faceplate • To ensure proper use, please read through this Guide before using this produ.ct. It is especially important that you read and observe Warnings and Cautions in this Guide. • Please keep the Guide in a safe and accessible place for future reference. Iffi. A WARNING l•li!Wl=t#I /l•li!f.ill=II/ l•li!t-idll=II I l•l:J!4.tll=II/ l•ll!f.i•dl=II Do not operate any function that takes your attention away from safe driving.
To adjust the clock Turn on the power Press {!)SRC. • Press and hold to turn off the power. Adjust the volume Turn the volume knob. Select a source Press <9SRC repeatedly. Change the display information . Press DISP repeatedly. 3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. 4 Turn the volume knob to make the settings, then press the knob. 5 6 To set the date 7 Turn the volume knob to select [DATE FORMAT], then press the knob.
Default: [XX] CD/USB/iPod [SYSTEM] [KEY BEEP] [ON]: Activates the keypress tone.; [OFF]: Deactivates. _ [FACTORY RESETI [YES]: Resets the settings to default (except the stored station).; [NO]:Cancels. [ENGLISH] ■ Start playback The source changes automatically and playback starts when you load a disc or attach a device (USB device/ iPod/iPhone) to the USB input terminal. Setctthe d' [ESPANOL] • ~----[F~ANCAIS] , informatk>n 8yd , HD Radio™ Tuner/Radio For Mi>!fi!l=m.
Functions Settings 1 2 3 4 Press the volume knob to enter [FUNCTION]. Turn the volume knob to select an item, then press the knob. Repeat step 2 until the desired item is selected or activated. Press and hold (\/~to exit'. · To return to the previous setting item, press OJ~. • Refer to the INSTRUCTION MANUAL on the following website for the detailed explanation of each item: • The availability of each item vary depending on the model.
■ Illumination Color Setting 5 Turn the volume knob to select a color for the selected zone, then press the knob. You can set your preferred illumination color for each zone. [INITIAL COLOR]/[VARIABLE SCAN]/[CUSTOM R/G/B]/ [RED1]/[RED2]/[RED3]/[PURPLE1]/[PURPLE2]/[PURPLE3]/ [PURPLE4]/[BLUE1 ]/[BLU E2]/[BLU E3]/[SKYBLUE1 ]/ [SKYBLUE2]/[LIGHTBLUE]/[AQUA1]/[AQUA2]/[GREEN1 ]/ [GREEN21 /[GREEt'.
Bluetooth® Once pairing is completed, Bluet9oth connection is established automatically. "□ 8T1" and/or "□ er2" indicator on the display window lights up. • The strength of the battery and• signal of the Iconnected device are shown on the supplementary display. · • • Depending on the Bluetooth version, operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit. • Be sure to turn on the Bluetooth function of the device to make the following operations.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. · • HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign.Patents. For patents see http://dts.com/patents. HD Radio"' and the HD, HD Radio, and "ARC" logos are registered trademarks or trademarks of iBiquity Digital Corporation in the United States and/or other countries.
MILITARY Units purchased lhroogh the U.SA military exchange service overseas may be serviced under warranty in the continental U.SA, subJect lo !he follow,1111 cond1J1ons 1) The ongmal warranty IS In effect 2) Proof of purchase Is prOVJded to the servicer.
U .S.A JVCKENWOOD USA Corporation This warranty will be honored only in lhe U.S A. WHO IS PROTECTED This warranly is enlorceable only by the original purchaser.
SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor Is copynghted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Important Notice concerning the Software -cJSON Copyright (c) 2009 Dave Gamble Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation fries (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: