Owner's Manual

ENGLISH
17
BLUETOOTH®
To On the faceplate On the remote control
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Press
.
Press
.
Reject another incoming
call
Press
.
Press
.
While having two active calls...
End current call and
activate held call
Press
.
Press
.
Swap between the
current call and held call
Press
.
Press
.
Adjust the phone volume
[00]
to
[35]
(Default:
[15]
)
Turn the volume knob during
a call.
This adjustment will not
affect the volume of the other
sources.
( Not available )
Switch between hands-free
and private talk modes
Press
during a call.
Operations may vary according
to the connected Bluetooth
device.
( Not available )
Improve the voice quality
While talking on the phone...
1 Press the volume knob to enter [
FUNCTION
].
2 Turn the volume knob to select an item (see the following table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN –10
—
+10
(
–4
):The sensitivity of the
microphone increases as the number increased.
NR LEVEL –5
—
+5
(
0
):Adjust the noise reduction level
until the least noise is being heard during a
phone conversation.
ECHO CANCEL –5
—
+5
(
0
):Adjust the echo cancellation
delay time until the least echo is being heard
during a phone conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2 until the desired item is selected
or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
SETTINGS
AUTO ANSWER
1
—
30
:The unit answers incoming call
automatically in the selected time (in
seconds).;
OFF
:Cancels.
BATT/SIGNAL* AUTO
:Shows the strength of the battery
and signal when the unit detects a Bluetooth
device and the Bluetooth device is connected.;
OFF
:Cancels. Clock time is shown.
*
Functionality depends on the type of the phone used.
JS_KWD_DPX792BH_KN_EN_00_1.indd 17 28/10/2015 5:24:16 PM