Owner's Manual

18
BLUETOOTH®
Make a call
You can make a call from the call history, phonebook, or dialing the number. Call by
voice is also possible if your mobile phone has the feature.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following table), then press the
knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
.
CALL HISTORY (Applicable only if the phone supports PBAP)
1 Press the volume knob to select a name or a phone number.
• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the display to
indicate the previous call status.
• Press
DISP to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
2 Press the volume knob to call.
PHONE BOOK (Applicable only if the phone supports PBAP)
1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains
many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
*
), press J / K .
• To select the desired first letter, turn the volume knob or press
S / T , then press
the knob.
Select “1” to search with numbers and select “
*
” to search with symbols.
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
•
The phonebook of the connected phone is automatically transferred to the unit when
pairing.
•
Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL
•
This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as “U”.)
NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9)
or character (
, #, +).
2 Press S / T to move the entry position.
Repeat steps
1 and 2 until you finish entering the
phone number.
3 Press the volume knob to call.
(or using RC-406)
1 Press the number buttons ( 0 to 9 ) to enter the
phone number.
2 Press to call.
VOICE Speak the name of the contact you want to call or the
voice command to control the phone functions.
(
 Make a call using voice recognition )
BATT LOW / MID / FULL
*
:Shows the strength of the battery.
NO SIGNAL / LOW / MID / MAX
*
:Shows the strength of the current
received signal.
*
Functionality depends on the type of the phone used.
Make a call using voice recognition
1
Press to activate the voice recognition of the
connected phone.
2 Speak the name of the contact you want to call or
the voice command to control the phone functions.
• Supported Voice Recognition features vary for each
phone. Refer to the instruction manual of the connected
phone for details.
• This unit also supports the intelligent personal assistant
function of iPhone.
JS_KWD_DPX792BH_KN_EN_00_1.indd 18 28/10/2015 5:24:16 PM