KENWOOD DRV-A601W GPS Integrated Dashboard Camera QUICK START GUIDE Dashcam mit integriertem GPS Schnellstartanleitung Camera embarquee avec GPS integre Guide de demarrage rapide Dashboard Camera met GPS Snelstartgids Videocamera da cruscotto con GPS integrato Guida di avvio rapido Camara de salpicadero con GPS integrado Guia de inicio rapido Camara de tablier com GPS incorporado Guia de lnicio Rapido B111AeoperncrpaTop c GPS-np111eMHIIIKOM KpaTKoe PYKOBO.
a 0 0 e 0 0 El 0 El 0 ..!2112-24VDC 0 EU contact address: JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC Uithoorn, THE NETHERLANDS I JVCKENWOOO Corporation Yokohama 221 -0022 Japan Made in China www.kenwood.
Parts Name and Functions Parts Name 0 Power Button 8 Up / Mute Button 0 E) Down I Screen Off Button G) 0 8 ~ ~ ~ G G 0 File Protect / Wireless Link Button LED Indicator Menu Button Record / OK Button Mode / Screen Shot Button ~ '1' CAM-IN DC-IN / Data Transfer Port HD OUT microSD Card Slot Connector Port Reset Status Button Speaker Function Power Button Press and hold the button for 3 seconds to turn the device on/ off.
In-Vehicle Installation 1. Insert microSD Card Into The Dash Cam The dash cam supports class 10 or above microSD card with 8GB to 256GB capacity. Follow the symbol as directed to insert the SD card. Do not remove or insert the memory card while the device is turned on. The microSD card is inserted as factory shipment condition. 2.
Feature & Support Parking Mode Access the VIDEO MENU by pressing the MENU button while in VIDEO MODE, and then turn the Parking Mode Sensor setting to On. In parking mode, the device will stay in a standby mode in conjunction with our hardwire kit CA-DR1030 (optional accessory). It can detect an impact above the normal level. recording events that could damage your vehicle. Also, the hardwire kit has an automatic power cutoff function.
Precautions for Use Disclaimer • Please note that JVCKENWOOD shall not be responsible for any damages suffered by the customer or a third party as a result of incorrectly using this product, a failure during use of this product, or other trouble, or due to the use of this product, unless such liability is acknowledged by law. Copyrights • Recorded video, image, and audio content cannot be used for other than personal enjoyment without the consent of the copyright holder as specified in the Copyright Act.
CE English Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed of as household waste.
FC FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual . The user could lose the authority to operate this equipment if an unauthorized change or modification is made. FCC NOTE • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 1S of the FCC Rules.
IC (CAN ICES-3(8) / NMB-3(8) IC (Industry Canada) Notice This device contains licenc~exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
DRV-A601W GPS Integrated Dashboard Camera INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, etc.) is available from . For your records Record the serial number, found on the back of the unit in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you can upon your KENWOOD dealer for information or service on the product.
Contents Before Use ................................................................................................................. 01 Dashboard Camera Function Guide ......................................................................... 01 Precautions for Use ................................................................................................... 02 Accessories ................................................................................................................. 09 Key Features .
Before Use • The screen images and operation examples in this document were created for explaining the operating procedures. • There may be screen images that differ from the actual screens or examples of operations not actually performed.
Precautions for Use Precautions and notices Warning! Do not operate the device while driving. Using this product does not change the requirement for a driver to take full responsibility for his or her behavior. This responsibility includes observing all traffic rules and regulations in order to avoid accidents, personal injury or property damage. • For your own safety, do not operate the controls of the product while driving. • A window mount is needed when using the device in a car.
Precautions for installation • Install the device in a position where it will not block the front view of the driver (position where hidden by the rear-view mirror). • Install the device so that it is within the wiping range of the wiper. • Install the device in a position where it will not interfere with the movement of the rear-view mirror. • Take care not to install the device over the vehicle inspection sticker or other sticker.
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed of as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste by products. Contact your local authority for details in locating a recycle facility nearest to you.
Declaração de Conformidade relativa à Diretiva RE 2014/53/UE Declaração de conformidade relativa à Diretiva RoHS 2011/65/UE Fabricante: JVCKENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPÃO Representante na UE: JVCKENWOOD Europe B.V.
Èeský Společnost JVCKENWOOD tímto prohlašuje, že rádiové zařízení DRV-A601W splňuje podmínky směrnice 2014/53/EU. Plný text EU prohlášení o shodě je dostupný na následující internetové adrese: Magyar JVCKENWOOD ezennel kijelenti, hogy a DRV-A601W rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU konformitási nyilatkozat teljes szövege az alábbi weboldalon érhető el: Hrvatski JVCKENWOOD ovim izjavljuje da je radio oprema DRV-A601W u skladu s Direktivom 2014/53/EU.
Malti B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar-radju DRV-A601W huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-dikjarazzjoni ta’ konformità huwa disponibbli fl-indirizz intranet li ġej: Українська Таким чином, компанія JVCKENWOOD заявляє, що радіообладнання DRV-A601W відповідає Директиві 2014/53/EU. Повний текст декларації про відповідність ЄС можна знайти в Інтернеті за такою адресою: Türkçe Burada, JVCKENWOOD DRV-A601W radyo ekipmanının 2014/53/AB Direktifine uygun olduğunu bildirir.
CAN ICES-3(B) / NMB-3(B) IC (Industry Canada) Notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
Accessories Before you get started, check you have everything below. Dashboard Camera (with 64GB microSD card) Suction mount Cigar Lighter Adapter Cable USB Cable Adhesive Mount Cable Clips PL Fliter * Product appearance may differ slightly to that shown above. Key Features - 3” LCD Color Screen We developed a screen that perfectly fits your camera, without any loss of resolution. This design allows you to use the playback feature, instantly letting you view the shot you just captured.
Parts Name and Functions 1 5 2 6 3 7 4 9 8 1. Power Button Press and hold the button for 3 seconds to turn the device on/off. 2. Up/Mute Button Up Navigate up within menus or go to the previous file in playback mode. Mute Turn on or off the audio recording function while in video mode. 3. Down/Screen Off Button Down Navigate down within menus or go to the next file in playback mode. Screen Off Turn on/off the LCD screen. 4.
6. Record/OK Button Record In Video mode, press to start or stop recording. In Photo mode, press to take a photo. OK The confirm button used to select options in menus. 7. Mode/Screen Shot Button Mode This button allows you to navigate between video, photo and playback modes. Screen Shot While you are recording in video mode, press the button and you will be able to take a screenshot of the current frame. 8. Screen The device is equipped with a standard 3” LCD color screen to let you view. 9.
12. microSD Card Slot Insert your microSD card here. Push your memory card into the slot until you hear a click. (microSD card is inserted into microSD Card Slot at the factory shipment condition) Insert Your microSD Card Into The Device The device is designed to allow a standard microSD card to record your footage. Before installing, make sure the gold end of the card is facing the LCD screen. Once it’s aligned with the slot, push the card in and listen for the CLICK that will confirm it is secure.
14. CAM-IN The device can be connected with the rear camera KCA-R200.(optional accessory) 15. DC-IN/Data transfer Port By connecting the device with the supplied cigar lighter adapter cable you are able to charge the device. This will also be utilized to let you connect the USB cord to your computer. You can either connect the cigar lighter adapter cable with the device or magnetic connector. 16. Reset Button On the rare occasions the device has a problem, use the reset button to shut down the device.
1. CONNECT THE DEVICE TO THE POLARIZER FILTER 1.1. Installing Circular Polarizer Filter Align the threaded side of the polarizer filter with device and turn it clockwise to make sure the rotation is smooth along the threaded metal area. 1.2. Adjusting Circular Polarizer Filter Rotate the polarizer filter outer metal ring clockwise and align arrow mark on the polarizer lens with the arrow mark on the device. Note: The arrow mark is the recommended position, users can adjust the polarizer angle accordingly.
2. 2.1 CONNECT THE DEVICE TO THE MAGNETIC MOUNT Attach the device onto (e) the magnetic connector on the mount. Make sure you align the device within the connector port for proper installation. 2.2 REPLACE THE SUCTION MOUNT WITH THE ADHESIVE MOUNT: Adhesive Mount Suction Mount (a) Suction release tab (b) Locking lever (c) Locking ring (d) Power socket (e) Magnetic Connector There are two types of mounts included in the package. One is a suction-cup and the other is an adhesive type.
How to use the Adhesive Mount: i. Loosen the (c) locking ring on the suction mount and pull the (e) magnetic connector out. ii. Next, loosen the (c) locking ring from the adhesive mount, and plug the (e) magnetic connector into the adhesive mount. iii. Clean the installation area on the windshield and peel off the plastic covering. Adhere it to the windshield. Loosen Tigten 3.
4. ADJUST THE ANGLE Loosen the (c) locking ring and adjust the device to the angle you want. When you find the perfect angle, remember to tighten the (c) locking ring again. 5. CONNECTING TO CIGAR LIGHTER SOCKET Connect the cigar lighter adapter cable that is in the package to your vehicle’s 12 V outlet. The provided cable clips can help you keep the power cable neat. Plug the cigar lighter adapter cable into the (d) power socket of the mount or the device. This will allow the device to begin charging.
Connect the Rear Cam KCA-R200 (optional accessory) 1. Connect the Rear Cam Insert CAM-IN connector into the CAM-IN port on compatible dashboard camera. CAM-IN connector of rear camera 2. Select installation position Start the engine to power up the rear cam, then turn on Wireless Link mode to connect with mobile device. Using the App to view the image and adjust the installation position. Note: Device will automatically turn on and start recording once power has been made available from the 12 V outlet.
Initial Settings THE FIRST-TIME SETUP When connecting the power, the device will turn on and display the first-time setup guide below. - Select the Language Language English Deutsche Français Nederlands En De Fr Nl Press OK to continue. - Select the Country and Time Zone Select Time Zone Select Country United States (EST) United States (CST) United States (MST) United States (PST) United States Canada Russia Spain Press OK to continue. Press OK to continue.
- Select the Speed Unit Select Speed Units MPH KMH Press OK to continue. - Set Wireless Link Password Set Wireless Link Password 1 2 3 4 5 6 7 8 Press OK to continue. TIP: You can reset the settings either by operating inside of the SETUP MENU, or by restoring defaults. You can switch the capitalization by Protect button when you set the Wireless Link password. From now on, the device will automatically turn on and start recording once power has been made available from the 12 V outlet.
Basic Operation -Video Mode The following information will help you better understand the icons in VIDEO MODE and their relative functions. Some icons show up only when corresponding functions are activated. 1 2 3 4 5 6 7 00:59 00:59 8 9 11:17:01 02/13/2019 11:17:01 02/13/2019 13 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 12 11 10 14 Mode: Indicates the device is in video mode. Resolution: Displays the current resolution. G Sensor: The current sensitivity level of G-Sensor.
Basic Operation -Video Menu Access the VIDEO MENU by pressing the MENU button while in VIDEO MODE. Resolution Video Length Exposure Parking Mode Sensor OK Enter MENU Back Use the UP and DOWN buttons to select setting options and press the OK button to enter the sub-menu. Once you access the sub-menu, highlight the desired setting and press the OK button to confirm your selection and to return to the VIDEO MENU. Press the MENU button twice to return to video mode.
Once the device detects any vibration in the parking mode, it will turn on the device automatically and record the video for 30 seconds. In this duration, if the device detects any other vibration, it will extend recording for 30 seconds until there is no vibration at all and turn off the device back to the parking mode.
Basic Operation -Photo Mode While in VIDEO MODE, press the MODE button to enter PHOTO MODE. In PHOTO MODE, you are able to take stationary photos. The following instructions will explain the icons in PHOTO MODE. Some icons show up only when corresponding functions are activated. 1 2 11:17:01 02/13/2019 5 1. 2. 3. 4. 5. 4 3 Mode: Indicates when the device is in photo mode. Exposure: Indicates the current exposure level settings. Date: Displays current date. Time: Displays current time.
Basic Operation -Photo Menu Access the PHOTO MENU by pressing the MENU button while in PHOTO MODE. Exposure Time & Date Stamp OK Enter MENU Back Use the UP and DOWN buttons to select setting options and press the OK button to enter the sub-menu. Press the MENU button twice to return to PHOTO MODE. Exposure: Adjust exposure levels settings. OPTIONS: +2/+1/ 0(default)/-1/-2 Time & Date Stamp: Turn ON or OFF the date stamp mark on the photos.
Basic Operation -Playback Mode While in PHOTO MODE, press the MODE button to enter PLAYBACK MODE In PLAYBACK MODE, you are able to review the videos and photos you have stored. DIRECTORIES Press the UP or DOWN buttons to navigate through the menu. Protected: The directory for all protected videos. Video: The directory for all unprotected videos. Note: If the video file is protected under the playback mode, the file will move in the protected folder. Photo: The directory for all photos.
The following instructions will explain the icons in Video File. 02/13/2019 Logo Date 11:17:01 Time X:+3.80 Y:+1.02 Y:+1.65 Accelerator Data 30MPH N5° 41’33.15” Speed W62”42”33.15 Latitude & Longitude KENWOOD Stamp: Logo, can be turned on/off in VIDEO MENU Time & Date Stamp: Date, Time, can be turned on/off in VIDEO MENU Information Stamp: Accelerator Data, Speed, Latitude & Longitude, can be turned on/off in VIDEO MENU 1 2 3 00:59 7 02/13/2019 11:17:01 5 6 1. 2. 3. 4. 5.
OK: PLAY/PAUSE. MENU: DELETE or PROTECT the video. UP: REWIND. DOWN: FAST FORWARD. MODE: STOP playing video and go back to Video/Protected directory. 6. Charging Indicator: Indicates if the device is charging or not. 7. Protected File: Indicates the selected file is protected. PHOTO FILES 80/80 20190213_111701_F 20190213_111801_F 20190213_111901_F 20190213_112001_F 02.13.
1. 2. 3. 4. Mode: Indicates when the device is in PLAYBACK MODE. File Type: Indicates the file type is photo. Date & Time: Indicates the date and time of the recorded file. Playback Controls: Use the device buttons as instructed below. UP: Previous file DOWN: Next file 5. Charging Indicator: Indicates if the device is charging or not. DELETING FILES Highlight the DELETE option and press the OK button. TIP: PROTECTED FILES CANNOT BE DELETED.
PROTECTING/UNPROTECTING FILES Highlight the PROTECT/UNPROTECT option and press the OK button.
Settings Access the SETUP MENU by pressing the MENU button twice. Wireless Link Format SD Card Device Sounds JUL Time & Date OK 7 Enter MENU Back Use the UP and DOWN buttons to select setting options and press the OK button to enter the sub-menu. Once you access the sub-menu, highlight the desired setting and press the OK button to confirm your selection and to return to the SETUP MENU. Press the MENU button to return to the current mode.
• Language: Select a preferred language. OPTIONS: English (default) /Deutsche /Français /Nederlands /Italiano /Español / Português /Pусский /Polska /Česky /Română • Country: Select a country and time zone setting. OPTIONS: United States /Canada /Russia /Spain /Germany /France/Italy /Netherlands / Belgium /Poland /Czech /Romania /United Kingdom/Others • Image Reversal: Rotate the video image and the screen 180 degrees.
Connection with Computer When you use the provided USB cable to connect the device to your computer, the LCD screen will show two available options. • USB Storage • Dash Cam Use the UP and DOWN buttons to select the necessary function, and press the OK button to continue. USB STORAGE When you have connected the device to the computer, the device will operate as a card reader. Your computer will have a pop up of a new drive for you to browse all the video and photo files.
Using the Desktop Software “KENWOOD VIDEO PLAYER” is a desktop software for displaying video recorded with the device. System Requirements for “KENWOOD VIDEO PLAYER” OS: Microsoft Windows 10, Windows 8.1, Windows 7* (except for the Windows 10 Mobile, Windows RT) *Windows 7 Service Pack 1 must be installed. *Microsoft Visual C++ must be installed. *DirectX XAudio2 must be installed(Windows 7 and older version). OS: Apple Mac OS X 10.
1. Video time line : Drag the Video time line bar to Rewind or Forward to cue Video, Speed and G-Sensor date. 12. Chart of G-sensor data : Display the G-data of the vehicle in the video when it was recorded. 2. Video play control buttons : Available options from left to right are stop, last clip, last frame, play, next frame next clip. Available hot keys for individual options are (1) Play / Pause: space (2) Stop: esc (3) Last frame: left (4) Next frame: right (5) Next clip: N (6) Last clip: B 13.
How to Edit the Video: KENWOOD VIDEO PLAYER JVC VIDEO PLAYER Edit Setup Share Help Edit Mode OK Cancel 00:27 01:00 Cut Time : INFORMATION File G Sensor 20 +3 0 mph 0 200 -3 X -2.0 Y 0 00:07 ~ 00:37 Z +1.0 Time Compass Compass 2018 / 08 / 14 , -19 : 33 : 03 -W Latitude Avg. Speed -N 25 1”56” -65mph Longitude Max Speed -W 121 33”32” -135mph -263.
1. Image processing: Proceed with image processing once the image export options are setup. 2. Export status (1): The image file export progress is presented as a percentage symbol "%" and is synced with item 3. 3. Export status (2): The image file export progress is presented by a frame being filled with layered colors ink and synced with item 2. The export is finished once the frame is fully inked in layered colors. 1. OK: Click to go back to the play mode page. 2.
-Share Mode KENWOOD VIDEO PLAYER INFORMATION 00:27 Click Share → Share Videos in the software system bar at the top of the window or the community sharing icon in the interface to display the sharing window. 1. To share the current video: When two files are playing, the one with the active speaker icon will be shared. 2. To share the non-current video: Click and open the file selection window. 3. Next step: Click to go to the next step.
KENWOOD VIDEO PLAYER Public 00:27 4 Private 01:00 Unlisted 5 1. Select a community platform: You can select just one community platform and the one being selected will be circled in layered colors. 2. Select the privacy mode: You can select the privacy mode of Public, Private, and Unlisted when you upload the video. 3.
KENWOOD JVC VIDEO VIDEO PLAYERPLAYER Edit Setup Share Help 00:27 INFORMATION File 1. File upload failure: This page displays if an upload failed or there is a server connection timeout. 2. Last step: Click to go back to the last step.
KENWOOD VIDEO PLAYER INFORMATION 00:27 1. Connect to community platform: The message "Connecting to Social Media…… Please Wait." displays when a connection is being initiated. Your default browser will display and connect to the selected community platform. You are required to bundle your account ID with the platform for connection the first time only (no longer needed once bundled). 2. Cancel: Click to go back to the last step.
KENWOOD VIDEO PLAYER 1. Upload status (1): The file upload progress is presented as a percentage symbol "%" and synced with item 2. 2. Upload status (2): The file upload progress is presented by a frame being filled with layered colors ink and synced with item 1. The file is uploaded successfully once the frame is fully inked in layered colors. 3. Upload progress: The former number is the MB uploaded and the latter is the total for the upload. 4. Cancel: Click to go back to the last step.
KENWOOD VIDEO PLAYER 1. Confirm: Click to go back to play mode information.
Using the Smartphone App “KENWOOD DASH CAM MANAGER” is a smartphone app for displaying video recorded with the device. System Requirements for “KENWOOD DASH CAM MANAGER” OS: Android 5.0.2 or later OS: iOS 9.0 or later Android is a trademark of Google Inc. in the U.S. and other countries. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries.
The following information will help you better understand the app and their relative functions. How to Connect: 1. Long press the Wireless Link button on the device and enter the connecting mode. 2. 3. 4. 5. Open the KENWOOD DASH CAM MANAGER of the smartphone app. Press the Connect button and select from the network list to pair the dashboard camera device. Enter the Wireless Link password into the input field. Connect completed, press the Continue button into the main screen of app. -Main Screen 1.
-Preview Click the preview display to enter the video mode, and click the video/photo icon to switch between these two modes. By clicking the red dot to start/stop recording and the white dot to take photos. 1. Back Button Back to main screen. 2. Dashboard Camera Image Preview Displays the streaming of the dashboard camera. 3. Video Mode Press it to switch to video mode. 4. Photo Mode Press it to switch to photo mode. 5. Status Bar Video mode: Recording duration. Photo mode: Remaining shot count. 6.
-Files on Dash Cam Click Files on Dash Cam to enter the Video Playback mode to review,protect/unprotect, and delete the files saved in the SD card. In addition, you can also download the important files to your mobile device. 1 2 3 4 5 6 7 8 9 47 1. Back Button Back to main screen. 2. Video/Image Play/Pause the video. 3. Time Line The time line for current video. 4. Switch Display Video/Image File Press the button to switch display file on the playback list. 5.
-Files on Mobile Click Files on Mobile to enter the Local Video Playback mode to review the downloaded videos with Google Maps, and also view the user’s route, speed, G-sensor and distance data. You can also shorten the video by using the edit function and share it to the other social media apps installed in your mobile device. 1 2 3 4 5 6 1. Back Button Back to main screen. 2. Video/Image Play/Pause the video. 3. Time Line The time line for current video. 4.
-How to Edit the Video: 1. Files on Mobile Device. 2. Press the Edit Mode button. 3. Select the video. 02:05 4. Press the Edit button and then press the Cut button. 5. Select the area of video. 49 6. Press the Check button to output the video.
-How to Share the Video: 1. Files on Mobile. 2. Press the Edit Mode button. 3. Select the video. 02:05 4. Press the Share button and press the Check button. 5. Select the social media apps installed in your smartphone.
-Menu Click Menu to enter the Video/Photo/General menu and adjust settings. Switch between these three menu by clicking the icons at the bottom. 4K -About Click About icon to view the software version and the app’s information.
Troubleshooting Blurred Image (Video) The device comes with a protective lens cover for the camera lens, be sure to remove it. Wipe the lens with a soft cloth until any debris/stains are removed. Clean your vehicles windshield where the camera is placed. Unable to insert SD card Make sure the metal portion of the memory card faces the screen side. Once inserted, push the card until a CLICK sound is heard.
The device shuts down on its own Auto power off function will turn off the device automatically after it loses its power supply. Make sure the device is connected properly to the car power cable. The device does not charge in my car If your cigar lighter adapter cable is not working properly with your device, check your car’s power fuses. Also check your power cord and replace it if there is an issue.
I press the MENU button but nothing happens Reminder: The device will not let you access the menu while it is recording. To access the menu, stop recording and the MENU feature will be accessible. When I download files from the KENWOOD website a malicious software message appears If this message appears, simply adjust your browser settings and allow for the download to proceed. Once complete, reset your browser security to protect your computer.
On Wireless Link Security The Wireless Link communicating with radio wave, there is a benefit that you are able to access Link freely as far as the radio wave reaches. On the other hand, without security setting there may be a risk of hacking or abuseful invasion by a malignant third party. We recommend that you use Wireless Link after setting security of the devices connected. Please be noted that we are not liable for any damage or troubles pertaining to security when using this function.
Requests Regarding Disposal or Transferring Ownership of an SD Card Using the SD card format and deletion functions of this device or formating with a function of a computer just changes the file management information and does not completely delete the data in a SD card. We recommend either physically destroying the actual SD card or using commercially available PC data deletion software or the like to completely delete the data in the SD card before disposal or transfer of ownership.
Specifications Model Number / Name DRV-A601W / GPS Integrated Dashboard Camera Power Requirements 5V / 2A; 12-24V DC Power Supply (Car power cable) Input: 12-24V DC Output: 5V DC Fuse Type: 32mm/2A Current Consumption 650mA Sensor Resolution 8.48M Pixels Lens Type/Angle/Aperture 8G / 130° / F1.
KENWOOD KCA-R200 Rear Camera for Dashboard Camera INSTRUCTION MANUAL JVCKENWOOD Corporation • Updated information (the latest Instruction Manual, et c.) is available from . For yo ur records Record the serial number, found on the back of the unit in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you can upon your KENWOOD dealer for information or service on the product.
Contents Ill Before Use ........................................... ....... .............................................. 01 Precautions for Use ..................................................................................... 01 Accessories . . . . . . .. . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... 03 Parts Name ............................. .. ................................
I Before Use • The screen images and operation examples in this document were created for explaining the operating procedures. • There may be screen images that differ from the actual screens or examples of operations not actually performed.
Precautions for installat ion • • • • • • • • • • Install the device in a position where it will not block the view of the driver. Install the device within the wiping range if equipped the wiper. Take care not to install the device over the vehicle inspection sticker or other sticker. Take care not to install the device where it will interfere with driving or airbag operation. If the device is installed incorrectly, event recording or parked recording may not work correctly.
I Accessories Before you get started, check you have everything below. Rear Ca mera Sm Mini USS cable Adhesive Pads Adhesive mount * Product apperance may differ slightly from that shown above. I Parts Name Rear Camera 2 01'--....!..:...!.11:~Jlllll.~i,--)- -""Ir -- -lallM 1. Rear camera. 2. Rear camera cable connector. 3.Adhesive mount. 4 1 4. Mounting port. Rear Camera Cable 5 6 I .--.-:"llllmllh--j- - - ---l,I I r--[~i:t-: 1 '--..l.._...!...!...Jlllll - - - - - ----1,j 5.
I installation and Connection Recommended installation position • • Install the device in a position where it will not block the view of the driver. Install the device within the wiping range if equipped the wiper. I Caution When passing the power cord through the front pillar or another part, observe the points below when performing the wiring work. • Wire the power cord farther forward or farther rearward than the airbag so that it does not interfere with the airbag.
For the first installation, follow the instructions below: Step 1: Locate the Rear Camera. 1.1 Connect the device to the adhesive mount Attach the device onto (3) the adhesive mount. Make sure you align the device within the adhesive mount for proper installation. 111111 3 1.2 Connect Rear Camera Cable Connector Connect (2) Rear Camera connector to (5) cable connector. Be sure the male and female pins is align when connecting.
1.3 Connect the Rear Cam Insert (6) CAM-IN connector into the CAM-IN port on compatible dashboard camera . I , , ,, , .. ---- .... ~ ~ .. '\ I I • 1.4 Select installation position Start the engine to power up the rear cam, then turn on Wireless Link mode to connect with mobile device. Using the App to view the image and adjust the installation position. Note: Device will automatically turn on and start recording once power has been made available from the 12 V outlet.
1.5 Putting on an adhesive mount After selecting the best installation position and angle, remove (3) Adhesive protective film and protective lens film, stick it on the rear windshield, keep press and add pressure for 30 seconds. ,--~---- .. .... ... '' ' I I I I -----TIP - Make sure that Cable can be connected at the installation location. - Windshield should be thoroughly cleaned and mounting area is wiped dry and at room temperature before applying the adhesive (Avoid under direct sunlight).
I Specifications Image Sensor 1/2.8" CMOS Sensor Frame Rate 30fps - Recording Resolution 2560 X 1440 (3.7M) Recording Format H.264 (MOV) ~ Lens F=2.0 Fixed Focus Lens Field of View Horizontal :129° / Vertical: 66° / Diagonal: 161° - Operating Voltage DCS.0V ~ I - Current Consumption · 120mA . Operating Temperature -10°c to 60°c Dimensions 2- 1/2" X 2-5/8" X 1-7/16" 63mm x 66mm x 36mm Weight 11 .
- Information on Disposal of Old Electrical and Electronic Equipment (applicable for countries that have adopted separate waste collection systems) Products with the symbol (crossed-out wheeled bin) cannot be disposed of as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste by products. Contact your local authority for details in locating a recycle facility nearest to you.
Declara~o de Conformidade relativa a Diretiva EMC 2014/30/EU Declara~o de conformidade relativa a Diretiva RoHS 2011/65/EU Fabrlcante: JVCKENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAO Representante na UE: JVCKENWOOD Europe B.V.
CAN ICES-3(8)/ NMB-3(8) IC (Industry canada) Notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada' s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause Interference. 2. This device must accept any Interference, including interference that may cause undesired operation of the device.
KENWOOD
Estimado Usuario de los productos KENWOOD: Gracias par haber elegido este Producto KENWOOD. Si resulta defectuoso bajo condiciones normales de funcionamiento, le rogamos que contacte con su distribuidor autorizado mAs abajo indicado, para informaci6n acerca de la garantla JVCKENWOOD EUROPE B. V. Sucursal en Espaila Carretera de Rubi, 88 00817' Sant Cugat def Vall•s. Barcelona Tel.+ 3'-93-507-5252 www.kenwood.
JVCKENWOOD U.K.
JVCKENWOOD USA Corporation This warranty will be honored only in the U.S.A. KENWOOD LIMITED WARRANTY FOR CAR STEREO COMPONENTS HOW LONG IS THE WARRANTY JVCKENWOOD USA Corporation (• KENWOOD ") warrants this product for a period of one (1) year from the date of original purchase. WHAT IS COVERED AND WHAT IS NOT COVERED Except as specified below, this warranty covers all defects in material and w orkmanship in KENWOOD car stereo components. The following are not covered by the warranty: 1.
JVCKENWOOD Canada Inc KENWOOD WARRANTY JVCKENWOOD Canada Inc. (hereinafter called •KENWOOD"I, gives the following written warranty to the original customer of each new KENWOOD product distributed in Canada by KENWOOD and purchased from a dealer authorized by KENWOOD. KENWOOD warrants that each new KENWOOD product, under normal use, is free from any defects, subject to the terms and conditions set forth below.
