DRV-A700W GPS Integrated Dashboard Camera INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, etc.) is available from . For your records Record the serial number, found on the back of the unit in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you can upon your Kenwood dealer for information or service on the product.
Contents Before Use ................................................................................................................. 01 Dashboard Camera Function Guide ......................................................................... 01 Precautions for Use ................................................................................................... 02 Accessories ................................................................................................................. 09 Key Features .
Before Use • The screen images and operation examples in this document were created for explaining the operating procedures. • There may be screen images that differ from the actual screens or examples of operations not actually performed.
Precautions for Use Precautions and notices Warning! Do not operate the device while driving. Using this product does not change the requirement for a driver to take full responsibility for his or her behavior. This responsibility includes observing all traffic rules and regulations in order to avoid accidents, personal injury or property damage. • For your own safety, do not operate the controls of the product while driving. • A window mount is needed when using the device in a car.
Precautions for installation • Install the device in a position where it will not block the front view of the driver (position where hidden by the rear-view mirror). • Install the device so that it is within the wiping range of the wiper. • Install the device in a position where it will not interfere with the movement of the rear-view mirror. • Take care not to install the device over the vehicle inspection sticker or other sticker.
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed of as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste by products. Contact your local authority for details in locating a recycle facility nearest to you.
Declaração de Conformidade relativa à Diretiva RE 2014/53/UE Declaração de conformidade relativa à Diretiva RoHS 2011/65/UE Fabricante: JVCKENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPÃO Representante na UE: JVCKENWOOD Europe B.V.
Èeský Společnost JVCKENWOOD tímto prohlašuje, že rádiové zařízení DRV-A700W splňuje podmínky směrnice 2014/ 53/ EU. Plný text EU prohlášení o shodě je dostupný na následující internetové adrese: Magyar JVCKENWOOD ezennel kijelenti, hogy a DRV-A700W rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU konformitási nyilatkozat teljes szövege az alábbi weboldalon érhető el: Hrvatski JVCKENWOOD ovim izjavljuje da je radio oprema DRV-A700W u skladu s Direktivom 2014/53/EU.
Malti B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar-radju DRV-A700W huwa konformi mad-Direttiva 2014/53 / UE. It-test kollu tad-dikjarazzjoni ta’ konformità huwa disponibbli fl-indirizz intranet li ġej: Українська Таким чином, компанія JVCKENWOOD заявляє, що радіообладнання DRV-A700W відповідає Директиві 2014/53 / EU. Повний текст декларації про відповідність ЄС можна знайти в Інтернеті за такою адресою: Türkçe Burada, JVCKENWOOD DRV-A700W radyo ekipmanının 2014/53/AB Direktifine uygun olduğunu bildirir.
CAN ICES-3(B) / NMB-3(B) IC (Industry Canada) Notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
Accessories Before you get started, check you have everything below. Dashboard Camera (with 16GB microSD card) Magnetic Charging Port Mount Adhesive Pads Hardwire Kit USB Cable Cable Clips PL Fliter * Product appearance may differ slightly to that shown above. Key Features - Quick Release Magnetic Mount We know how difficult it is to maintain focus with movement. We developed a mount that is uniquely designed for easy attaching and removing so you can focus on capturing the perfect shot.
Parts Name and Functions 1 2 3 9 10 4 5 7 6 8 1. File Protect / Wireless Link Button File Protect Simply press the button to protect the current video file from overwriting. Note: - If the button is pressed within the first third of a video clip, the previous clip will also be protected. - If the button is pressed within the final third of a video clip, the next clip will also be protected (if recording continues). Wireless Link Press and hold for 3 seconds to turn on the Wireless Link function.
5. Reset Button On the rare occasions the device has a problem, use the reset button to shut down the device. Simply press the reset until the device turns off and the device will automatically turn on. 6. Speaker System sound and recorded footage sound. 7. DC-IN / Data Transfer Port By connecting the device with the supplied power cord you are able to charge the device. This will also be utilized to let you connect the USB cord to your computer.
Installation and Connection • • • Recommended installation position Install the device in a position where it will not block the front view of the driver (position where hidden by the rear-view mirror). Install the device so that it is within the wiping range of the wiper. Mounting the device to the center of the windshield behind the rear-view mirror will facilitate optimal video recording.
1. CONNECT THE DEVICE TO THE POLARIZER FILTER 1.1. Installing Circular Polarizer Filter Align the threaded side of the polarizer filter with device and turn it clockwise to make sure the rotation is smooth along the threaded metal area. (Polarizer Filter is attached at the factory shipment condition.) 1.2. Adjusting Circular Polarizer Filter Rotate the polarizer filter outer metal ring clockwise and align arrow mark on the polarizer lens with the arrow mark on the device.
2. CONNECT THE DEVICE TO THE MAGNETIC CHARGING PORT MOUNT Attach the device onto the magnetic charging port connector. Make sure you align the device within the connector port for proper installation. 3. CONNECT THE FUSE TAP CABLE TO THE FUSE BOX 3.1 Find your vehicle's fuse box. Typically it locates under the driver steering wheel or underneath your engine hood. Please refer your vehicle manual. 3.2 Remove an original fuse associated with your vehicle’s ignition ACC/Switched or Permanent power supply.
5. SELECT INSTALLATION POSITION View the image and adjust the installation position through the smartphone. 6. STICK THE ADHESIVE ONTO THE WINDSHIELD After positioning a location on the windshield, clean the area with a dry/clean cloth, remove the adhesive protective film and protective lens film, stick it on the windshield, keep pressing and adding pressure on it for 30 seconds.
Connect the Rear Cam KCA-R100 (optional accessory) 1. Connect the Rear Cam Insert CAM-IN connector into the CAM-IN port on compatible dashboard camera. CAM-IN connector of rear camera 2. Select installation position Start the engine to power up the rear cam, then turn on Wireless Link mode to connect with mobile device. Using the App to view the image and adjust the installation position. Note: Device will automatically turn on and start recording once power has been made available from the 12 V outlet.
Initial Settings THE FIRST-TIME SETUP When device is powered, the dash cam will turn on and automatically enter Wireless Link mode. Please setup the dash cam with your smartphone and it will display the first-time setup.
- Select the Speed Unit - Set Wireless Link Password - Format SD Card TIP: You can reset the settings either by operating inside of the SETUP MENU, or by restoring defaults. Please read carefully and follow the instructions below to help you operate the device safely.
Basic Operation -Video Menu Access the VIDEO MENU(Video Setting on the app) through the smartphone. About detailed explanation of smartphone app operation, refer to "Using the smartphone app" (P34 to P42). • Resolution: Choose the video resolution. OPTIONS: 1080P 30fps Dual / 1440P 30fps (default) / 1080P 30fps • Video Length: Set the length for each individual video clip. The video recorded by the device will be split and stored as individual video clips.
• KENWOOD Stamp: Turn the KENWOOD logo stamp ON or OFF on the recorded files. OPTIONS: On (default)/Off • Time & Date Stamp: Turn ON or OFF the date stamp mark on the recorded files. OPTIONS: On (default)/Off • Information Stamp: Turn the Information stamp including the acceleration, speed data on the recorded files ON or OFF. OPTIONS: On (default)/Off • License Plate Stamp: Input your license plate number to put your license plate stamp on the recorded files.
-Photo Menu Access the PHOTO MENU(Camera Setting on the app) through the smartphone. About detailed explanation of smartphone app operation, refer to "Using the smartphone app" (P34 to P42). Exposure: Adjust exposure levels settings. OPTIONS: +2/+1/ 0(default)/-1/-2 Time & Date Stamp: Turn ON or OFF the date stamp mark on the photos. OPTIONS: On (default)/Off NOTE: When you are in the System Setting -> Restore Defaults, you will be able to restore all the settings to the device’s default settings.
Settings -Setup Menu Access the SETUP MENU(System Setting on the app) through the smartphone. About detailed explanation of smartphone app operation, refer to "Using the smartphone app" (P34 to P42). Note: The default settings have been selected for great image quality and ease of operation. Under most circumstances, you don’t need to change the settings. • Format SD Card: Format the memory card. Formatting will remove ALL the files in the card.
Connection with Computer USB STORAGE When you use the provided USB cable to connect the device to your computer. The device will operate as a card reader. Your computer will have a pop up of a new drive for you to browse all the video and photo files. Note: The device is a “Read Only” device. If you want to copy/delete/edit the files, remove the SD card and use another card reader to connect your computer. Remember to always turn off the device before disconnecting it from your computer.
Using the Desktop Software “KENWOOD VIDEO PLAYER” is a desktop software for displaying video recorded with the device. System Requirements for “KENWOOD VIDEO PLAYER” OS: Microsoft Windows 10, Windows 8.1, Windows 7* (except for the Windows 10 Mobile, Windows RT) *Windows 7 Service Pack 1 must be installed. *Microsoft Visual C++ must be installed. *DirectX XAudio2 must be installed(Windows 7 and older version). OS: Apple Mac OS X 10.
1. Video time line : Drag the Video time line bar to Rewind or Forward to cue Video, Speed and G-Sensor date. 12. Chart of G-sensor data : Display the G-data of the vehicle in the video when it was recorded. 2. Video play control buttons : Available options from left to right are stop, last clip, last frame, play, next frame next clip. Available hot keys for individual options are (1) Play / Pause: space (2) Stop: esc (3) Last frame: left (4) Next frame: right (5) Next clip: N (6) Last clip: B 13.
How to Edit the Video: KENWOOD VIDEO PLAYER JVC VIDEO PLAYER Edit Setup Share Help Edit Mode OK Cancel 00:27 01:00 Cut Time : INFORMATION File G Sensor 20 +3 0 mph 0 200 -3 X -2.0 Y 0 00:07 ~ 00:37 Z +1.0 Time Compass Compass 2018 / 08 / 14 , -19 : 33 : 03 -W Latitude Avg. Speed -N 25 1”56” -65mph Longitude Max Speed -W 121 33”32” -135mph -263.
1. Image processing: Proceed with image processing once the image export options are setup. 2. Export status (1): The image file export progress is presented as a percentage symbol "%" and is synced with item 3. 3. Export status (2): The image file export progress is presented by a frame being filled with layered colors ink and synced with item 2. The export is finished once the frame is fully inked in layered colors. 1. OK: Click to go back to the play mode page. 2.
-Share Mode KENWOOD VIDEO PLAYER INFORMATION 00:27 Click Share → Share Videos in the software system bar at the top of the window or the community sharing icon in the interface to display the sharing window. 1. To share the current video: When two files are playing, the one with the active speaker icon will be shared. 2. To share the non-current video: Click and open the file selection window. 3. Next step: Click to go to the next step.
KENWOOD VIDEO PLAYER Public 00:27 4 Private 01:00 Unlisted 5 1. Select a community platform: You can select just one community platform and the one being selected will be circled in layered colors. 2. Select the privacy mode You can select the privacy mode of Public, Private, and Unlisted when you upload the video. 3.
KENWOOD JVC VIDEO VIDEO PLAYERPLAYER Edit Setup Share Help 00:27 INFORMATION File 1. File upload failure: This page displays if an upload failed or there is a server connection timeout. 2. Last step: Click to go back to the last step.
KENWOOD VIDEO PLAYER INFORMATION 00:27 1. Connect to community platform: The message "Connecting to Social Media…… Please Wait." displays when a connection is being initiated. Your default browser will display and connect to the selected community platform. You are required to bundle your account ID with the platform for connection the first time only (no longer needed once bundled). 2. Cancel: Click to go back to the last step.
KENWOOD VIDEO PLAYER 1. Upload status (1): The file upload progress is presented as a percentage symbol "%" and synced with item 2. 2. Upload status (2): The file upload progress is presented by a frame being filled with layered colors ink and synced with item 1. The file is uploaded successfully once the frame is fully inked in layered colors. 3. Upload progress: The former number is the MB uploaded and the latter is the total for the upload. 4. Cancel: Click to go back to the last step.
KENWOOD VIDEO PLAYER 1. Confirm: Click to go back to play mode information.
Using the Smartphone App “KENWOOD DASH CAM MANAGER” is a smartphone app for displaying video recorded with the device. System Requirements for “KENWOOD DASH CAM MANAGER” OS: Android 5.0.2 or later OS: iOS 9.0 or later Android is a trademark of Google Inc. in the U.S. and other countries. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries.
The following information will help you better understand the app and their relative functions. How to Connect: 1. Long press the Wireless Link button on the device and enter the connecting mode. 2. 3. 4. 5. Open the KENWOOD DASH CAM MANAGER of the smartphone app. Press the Connect button and select from the network list to pair the dashboard camera device. Enter the Wireless Link password into the input field. Connect completed, press the Continue button into the main screen of app.
-Main Screen 1 2 3 4 5 6 7 8 9 10 1. Dashboard Camera Live View Press to check the live view. Time & Date Displays the device current settings of Date, Time, Country, and Time Zone. 3. Format SD Card Format the memory card. Format will remove ALL the files in the card. 4. Last Format Date Displays the date of your last format. 5. Dash Cam Info Press to check the Dashboard camera’s Information. 6. Audio Rec Press to turn on/off the audio recording function. 7.
-Preview Click the preview display to enter the video mode, and click the video/photo icon to switch between these two modes. By clicking the red dot to start/stop recording and the white dot to take photos. 1 2 3 4 5 6 37 1. Back Button Back to main screen. 2. Dashboard Camera Image Preview Displays the streaming of the dashboard camera. 3. Video Mode Press it to switch to video mode. 4. Photo Mode Press it to switch to photo mode. 5. Status Bar Video mode: Recording duration.
-Files on Dash Cam Click Files on Dash Cam to enter the Video Playback mode to review,protect/unprotect, and delete the files saved in the SD card. In addition, you can also download the important files to your mobile device. 1 2 3 4 5 6 7 8 9 38 1. Back Button Back to main screen. 2. Video/Image Play/Pause the video. 3. Time Line The time line for current video. 4. Switch Display Video/Image File Press the button to switch display file on the playback list. 5.
-Files on Mobile Click Files on Mobile to enter the Local Video Playback mode to review the downloaded videos with Google Maps, and also view the user’s route, speed, G-sensor and distance data. You can also shorten the video by using the edit function and share it to the other social media apps installed in your mobile device. 1 2 3 4 5 6 7 8 9 10 11 12 8. Google Maps Press the button to turn on the map. Note: This feature only works when the video had GPS data. 9.
-How to Edit the Video: 1. Files on Mobile Device. 2. Press the Edit Mode button. 3. Select the video. 02:05 4. Press the Edit button and then press the Cut button. 5. Select the area of video. 40 6. Press the Check button to output the video.
-How to Share the Video: 1. Files on Mobile. 2. Press the Edit Mode button. 3. Select the video. 02:05 4. Press the Share button and press the Check button. 5. Select the social media apps installed in your smartphone.
-Menu Click Menu to enter the Video/Photo/General menu and adjust settings. Switch between these three menu by clicking the icons at the bottom. 4K -About Click About icon to view the software version and the app’s information.
Troubleshooting Blurred Image (Video) The device comes with a protective lens cover for the camera lens, be sure to remove it. Wipe the lens with a soft cloth until any debris/stains are removed. Clean your vehicles windshield where the camera is placed. Unable to insert SD card Make sure the metal portion of the memory card faces the button side. Once inserted, push the card until a CLICK sound is heard.
The device does not charge in my car If your power cord is not working properly with your device, check your car’s power fuses. Also check your power cord and replace it if there is an issue. SD Card is not letting me view my files Try some different card readers and computers to see if any of them can view the files. If none of them work, the files are probably damaged. Use the device to format the memory card.
On Wireless Link Security The Wireless Link communicating with radio wave, there is a benefit that you are able to access Link freely as far as the radio wave reaches. On the other hand, without security setting there may be a risk of hacking or abuseful invasion by a malignant third party. We recommend that you use Wireless Link after setting security of the devices connected. Please be noted that we are not liable for any damage or troubles pertaining to security when using this function.
Requests Regarding Disposal or Transferring Ownership of an SD Card Using the SD card format and deletion functions of this device or formating with a function of a computer just changes the file management information and does not completely delete the data in a SD card. We recommend either physically destroying the actual SD card or using commercially available PC data deletion software or the like to completely delete the data in the SD card before disposal or transfer of ownership.
Specifications Model Number / Name DRV-A700W / GPS Integrated Dashboard Camera Power Requirements 5V / 2A; 12-24V DC Power Supply (power cord) Input: 12-24V DC Output: 5V DC Fuse Type: 2A (The ferrite core locates at 50cm from the mini USB port of the car charger) Current Consumption 320mA Sensor Resolution 5.14M Pixels Lens Type/Angle/Aperture 6G / 154° / F1.
