DUAL DIN SIZED CD RECEIVER DPX-MP5110U DPX-MP4110 DPX-MP3110 INSTRUCTION MANUAL © B64-4186-00/00 (MW) B64-4186-00_00_English.indd 1 08.2.
Contents Before use 3 Appendix Basic Operation 4 Accessories/ Installation Procedure 20 General functions Tuner functions Disc & Audio file play functions Cassette play functions General Operation 7 Audio Control Adjusting the detail of Audio Control Audio Setup Speaker Setting Sound Enhancer Select Sound Enhancer Control Spectrum Analyzer Select Illumination Color Select User Color Setting Display Switching Tuner Operation 18 Connecting Wires to Terminals 21 Installation 22 Troubleshooting
Before use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the (page 16). How to reset your unit • If this unit or the connected unit (disc auto changer, etc.
Basic Operation DSI indicator Display Disc slot [ ] DPX-MP5110U [SE] [SRC] [M.JOG] [COL] [ ] USB Terminal Control knob [ATT] [1] [2] General functions Power/Source Select button [SRC] Turns on the power. When the power is on, the source switches between Tuner (“TUNER”) , Tape** (“TAPE“) , USB* (“USB”), CD (“CD”) , Auxiliary input (“AUX”), and Standby (“STANDBY”) each time this button is pressed. Press at least 1 second to turn off the power. * Function of DPX-MP5110U.
: Indicates the button etc. to operate. Disc & Audio file play functions Disc play Disc slot Starts playing when a disc is inserted. indicator is ON. When a CD is inserted, the ⁄ • 3 inch (8 cm) CD cannot be used. Attempt to insert using an adapter can cause malfunction. USB device play USB Terminal Folder search Control knob Changes the folder containing the audio file when pushing toward up or down. Select mode [M.
Basic Operation DSI indicator Display : Indicates the button etc. to operate. Disc slot Cassette tape slot [ ] DPX-MP4110 [SE] [SRC] [M.JOG] [COL] [ ] Tape [ ] [ATT] [1] Control knob [2] Cassette play functions Direction [38] When you want to listen to the reverse side. Tape[0] Fast Forwarding and Rewinding knob [4] [5] Dolby B NR Cassette play Cassette tape slot Starts playing when a cassette tape is inserted. When a Cassette is inserted, the indicator is ON.
General Operation Audio Control Adjusting the detail of Audio Control You can adjust following Audio Control items ; Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail. Adjustment Item Rear volume Subwoofer level System Q Display Range “R-VOL” 0 — 35 “SW L” –15 — +15 “User”/“Rock”/ User setting/Rock/Pops/Easy/ “Pops”/“Easy”/ Top 40/Jazz/Natural “Top40”/“Jazz”/ (The indicator turns on “Natural” according to the setting.
General Operation Audio Setup Speaker Setting You can set Sound system, such as follows; Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Adjustment Item Front High Pass Filter Display “HPF” Rear High Pass Filter “HPR” Low Pass Filter Subwoofer Phase Volume offset Loudness Dual Zone System “LPF” “PHAS” “V-Off” “LOUD” “2ZON” Range Through/40/60/80/100/120/ 150/180/220 Hz Through/40/60/80/100/120/ 150/180/220 Hz 50/60/80/100/120/Through Hz Reverse (180°)/ N
Sound Enhancer Control ⁄ Adjusts each function of Sound effect individually. • Scan of Spectrum Analyzer: The items from “PeakHold” to “Jump” are displayed in sequence. 1 Enter the Sound Effect Control mode Press the [SE] button for at least 1 second. “SE CTRL” is displayed. 2 Select the Sound effect item for adjustment Push the Control knob towards right or left. 3 Adjust the Sound effect item Push the Control knob towards up or down.
General Operation In Tape source User Color Setting Adjust the illumination color with R(Red), G(Green), B(Blue) setting. Adjusted set value is memorized in the of User setting area. Information Play time (Tape counter) Clock Graphic Display “Counter” “Clock” “Graphic” 1 Select the item to adjust and select “USER” See step1 to step3 of (page 9) for detail. 2 Enter the RGB adjusting mode Press the Control knob for at least 1 second.
Tuner Operation Auto Memory Entry Frequency Step Setting Putting stations with good reception in the memory automatically. Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 Select the band for Auto Memory Entry Push the Control knob towards up or down. 2 Enter Menu mode Press the [M.JOG] button for at least 1 second. “Menu” is displayed. 3 Select the Auto Memory Entry mode Push the Control knob towards up or down. Select the “A-Memory” display.
Music disc/Audio file Operation Play Functions of Disc Changer While a disc in the disc changer is being played, the following play functions can be used. Playing the Current Song or Disc Repeatedly. (Repeat play) Press the [4] button. Pressing the button repeatedly selects Track Repeat play on (“TRAC REP”), Disc Repeat play on (“Disc REP”), and Repeat play off (“REP Off”) sequentially. Randomly plays the music in the disc changer. (Magazine random play) Press the [6] button.
Cassette Operation Function of Music CD Track Select Select the song you want to listen to by turning the control knob. 1 Enter Multi Jog Select mode Press the [M.JOG] button. “M. Jog On” is displayed. Displays the current music No. 2 Select the music Turn the Control knob. 3 Play the selected song Press the Control knob. The Multi Jog Select mode is canceled and the selected song is played. DPSS with the Remote control Designating the music to be skipped with the remote control number buttons.
Menu Operation Menu System : Can be set during Tuner reception. : Can be set while accessing AUX source. — : Can be set during all sources. Set up the following functions; Display “Code Set” “I-EFCT” Setting Refer to page 14 0/1/2/3 “Beep” On*/Off “CLK ADJ” “DSI” Refer to page 15 On*/Off Setting overview Sets security code. Set the illumination color effect. (page 19) Setting the operation check sound (beep sound) ON/OFF. Sets the clock.
6 Confirm the Security Code Press the Control knob for at least 3 seconds. When “RE-Enter” is displayed, “Code” is also displayed. 7 Do the step 3 through 6 step operation, and reenter the security code. “Approved” is displayed. The Security Code function activates. ⁄ • If you enter a Code different from your Security Code, you have to start over from step 3. 8 Exit Security Code mode Press the [M.JOG] button.
Menu Operation Basic Operations of remote control Demonstration mode Setting SRC VOL Turning the demonstration mode ON/OFF. ATT 1 Select Demonstration item during Menu mode Select the “DEMO” display. For how to select menu items, refer to
⁄ Dual Zone control Dual zone system on and off [2-ZONE] Rear channel volume control [5]/ [∞] ¤ In Tuner source Band select About [ ] This button is used when Bluetooth HANDS FREE BOX is connected. For more information, refer to the instruction manual of Bluetooth HANDS FREE BOX. • Do not set the remote control in hot places such as on the dashboard. [FM]/[AM] Loading and Replacing the battery Station select [4]/[¢] Recall preset stations [1] — [6] Use two “AA”/ “R6”-size batteries.
Appendix About Audio file About USB device • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • USB device Playable Model DPX-MP5110U • Playable USB device USB mass storage class • Playable USB device file system FAT16, FAT32 Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device.
Menu Glossary For operating KCA-BT100 • SWPRE (Switching Preout) Switches the preout between rear output (“R”) and subwoofer output (“SW”). • SUPREME Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate.
Accessories/ Installation Procedure Accessories 1 ..........1 2 ..........1 3 ..........6 4 ..........6 Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 5. Connect the wiring harness connector to the unit. 6.
Connecting Wires to Terminals Steering remote control (Light Blue/Yellow) REMO.CONT To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. When this terminal is not in use, leave its cap on. FM/AM antenna input Front preout Fuse (10A) Wiring harness (Accessory1) Rear/SubWoofer preout To Kenwood disc changer/ External optional accessory If no connections are made, do not let the wire come out from the tab.
Installation Installation Install onto the car bracket using the supplied screws (M5 × 6 mm, M5 × 7 mm). The holes of the car bracket to use will differ depending on the car model. Car Bracket Accessory3 (M5 × 7 mm) or Accessory4(M5 × 6 mm) Accessory2 (Only for NISSAN car) 22 | DPX-MP5110U/DPX-MP4110/DPX-MP3110 B64-4186-00_00_English.indd 22 08.2.
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! ! ! • Cannot set up the subwoofer. • Cannot set up the High Pass Filter. • Cannot set up the Fader. • No Audio control effect on AUX. ▲ • Preout is not set to subwoofer. ☞ “SWPRE” of
Troubleshooting Guide The messages shown below display your systems condition. NA File: An Audio file is played with a format that this unit can’t support. Eject: Copy PRO: A copy-protected file is played. Reading: The unit is reading the data on the disc. Hold: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ➪ Cool down the unit by opening the windows or turning on the air conditioner.
Specifications FM tuner section Frequency range 200 kHz space : 87.9 MHz – 107.9 MHz 50 kHz space : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.
B64-4186-00_00_English.indd 26 08.2.
B64-4186-00_00_English.indd 27 08.2.
B64-4186-00_00_English.indd 28 08.2.
