DVD / CD PLAYER DVF-3530 DV-402 INSTRUCTION MANUAL KENWOOD CORPORATION COMPACT DIGITAL AUDIO B60-4833-08 (EN)
Introduction DVF-3530 / DV-402 Before applying power Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ....................................................... AC 120V only Australia ....................................................................... AC 240 V only Europe and U.K. ............................................................ AC 230V only *Other countries ....................
Introduction 3 DVF-3530 / DV-402 Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage.
IMPORTANT SAFEGUARDS Caution : Read this page carefully to ensure safe operation. DVF-3530 / DV-402 Please read all of the safety and operating instructions before operating this appliance. Adhere to all warnings on the appliance and in the instruction manual. Follow all the safety and operating instructions. These safety and operating instructions should be retained for future reference. Preparations 1.
IMPORTANT SAFEGUARDS 5 DVF-3530 / DV-402 13.Lightning – For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges. 14.Abnormal smell – If an abnormal smell or smoke is detected, immediately turn the power OFF and unplug the appliance from the wall outlet.
Special features and Contents DVF-3530 / DV-402 Special features This document classifies the applications of each feature using the following marks : Description of a feature that can be used with DVD. CD : Description of a feature that can be used with CD.
Discs information 7 DVF-3530 / DV-402 Recording systems and types of playable discs The system using this unit does not only play music from CD but can also play the discs listed below to offer you high-quality entertainment of video of movies and live concerts. DVD Playable Disc CD COMPACT Logo mark on disc DIGITAL AUDIO 8cm Played sides Contents Video + Audio 8cm 12cm One side only One side only Max. 20 min., digital Max. 74 min., digital 12cm One or both One or both Approx. 41 min.
Region codes DVF-3530 / DV-402 Every player of this model has a certain region code assigned to it based on the country where the player is used. When the player is used to play back DVD discs, it can only play the DVD discs carrying the region codes matching the region code of the player. The region code for this player is described on the rear panel of the player.
Video formats 9 DVF-3530 / DV-402 The video signals used to display TV pictures and video disc pictures are mainly based on two types of signal formats (PAL and NTSC), which are assigned to each country or area as shown on the right. As a result, it is required to select discs according to the video format used with your TV monitor (in your country or area). TV formats of major countries TV Format NTSC PAL Major Countries & Areas Japan, Taiwan, Korea, U.S.A., Canada, Mexico, Philippines, Chile, etc.
Important items DVF-3530 / DV-402 Maintenance Cleaning Caution against contact revitalizer Unplug this appliance from the wall outlet before cleaning. Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth. Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they may deform the plastic component.
System Connections (for Europe and U.K.) 11 DVF-3530 / DV-402 Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. Caution: Do not plug in the power lead until all connections are completed. Caution Malfunction of microcomputer Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard. ÷ Do not place any objects impairing heat radiation onto the top of unit.
System Connections (for Europe and U.K.
System Connections (for Other countries) 13 DVF-3530 / DV-402 Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. Caution: Do not plug in the power lead until all connections are completed. Except for U.S.A. and Canada Caution Malfunction of microcomputer Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.
System Connections (for Other countries) DVF-3530 / DV-402 Connecting to a TV with Component input terminals TV DV-402 or DVF-3530 Preparations VIDEO OUTPUT Cr DIGITAL OUTPUT AUDIO OUTPUT (PCM/BIT STREAM) DIGITAL COAXIAL L R COMPONENT VIDEO OUTPUT Cb S-VIDEO Y Audio cord Video cords Connecting to an Audio component TV DV-402 or DVF-3530 VIDEO OUTPUT AV receiver or Amplifier Cr DIGITAL OUTPUT AUDIO OUTPUT (PCM/BIT STREAM) DIGITAL COAXIAL L R COMPONENT VIDEO OUTPUT Cb S-VIDEO Coaxial
Controls and indicators 15 DVF-3530 / DV-402 TITLE indicator CHAPTER indicator TRACK indicator REPEAT indicators REPEAT 1 A-B REPEAT RANDOM indicator Program indicator Play/Pause indicator SKIP indicator DVD indicator CD indicator Playback status indicator Character information display section Display 1 2 3 STANDBY ON/STANDBY 0 7 6 4 ¢ 1 ¡ POWER ON 9 8 7 OFF 4 1 STANDBY indicator 2 ON/STANDBY ( ) key 3 POWER ON / OFF switch 4 Disc tray 5 0 (open/Close) key 6 1, ¡ (Search) keys & &
Operation of remote control unit DVF-3530 / DV-402 # Preparations 1 2 3 4 5 $ % ^ & 6 7 8 * ( 9 ) 0 ¡ ™ ! £ @ The keys on the remote control unit with the same names as on the main unit have the same function as the keys on the main unit. 1 POWER ( ) key & Power ON/OFF switching is executed.
Playback of disc 17 DVF-3530 / DV-402 Basic play Preparation POWER POWER ( ) key 6 (PLAY/PAUSE) key OPEN/CLOSE (0) key ON OFF ÷ set the POWER ON/OFF switch to the ON ( ) position. ÷ When the POWER ON/OFF switch of the main unit is left ON at all times, the power can be switched on and off with the remote control unit.
Playback of disc DVF-3530 / DV-402 Disc playback features PREV, NEXT (4, ¢) keys REV, FF (1, ¡) keys 6 (PLAY/PAUSE) key 7 6 0 POWER Notes ÷ You won’t hear the sound (audio) on the DVD when you’re using the Skip, Search, Step or Slow motion features. ÷ Playback features are not available during the opening credits of a movie.
Using the On-screen banner display 19 DVF-3530 / DV-402 The on-screen Banner Display contains many playback features. To see the Banner Display, press ON SCREEN key on the remote while a disc is playing. Use the Cursor (Up/Down/Left/Right) keys on the remote to move through the different features in the Banner Display. Each feature is illustrated with an icon. 1 During playback, press the ON SCREEN key on the remote.
Using the On-screen banner display DVF-3530 / DV-402 DVD Selecting a Title Some discs contain more than one title. For example, there might be four movies on one disc (each movie might be considered a title). DVD CD Selecting a Chapter or Track Because DVD discs use digital technology, a title can be divided into individual chapters (similar to tracks on a CD). You can skip a specific chapter by using the Chapter section in the Banner Display.
Using the On-screen banner display 21 DVF-3530 / DV-402 DVD Changing the Audio Language DVD Changing the Subtitle Language If the disc was created with different language tracks, you can use the Banner Display to temporarily change the DVD player’s Audio setting. You can change the Subtitle language while you’re watching a disc (but only if the disc was created with subtitles).
Using the On-screen banner display DVF-3530 / DV-402 DVD Changing the Camera angle CD Using IntroScan function Some disc contains multiple angles particular scene or sequence. If the disc only has one angle, this feature won’t work. IntroScan plays the first few seconds of each track on the CD similar to the scan feature that’s on many car radios. Using the on-screen banner display Using the on-screen banner display 1 During playback, press the ON SCREEN key on the remote.
Using the On-screen banner display 23 DVF-3530 / DV-402 DVD CD Using Bookmarks The bookmark feature lets you mark a point on the disc that you can go to quickly. You can store up to 9 bookmarks. Create the bookmark Recalling a bookmarked scene 1 During playback, press the ON SCREEN key on the remote. ON SCREEN 1 During playback, press the ON SCREEN key on the remote. ON SCREEN 2 Press the Cursor left/right (2/3) keys until the BOOKMARK icon is highlighted. 3 Press the ENTER key.
Using the On-screen banner display DVF-3530 / DV-402 DVD CD Repeat play DVD CD A-B Repeat play Desired titles or discs can be played back repeatedly. There are four Repeat options: ÷ Disc – Repeat the disc that is playing. ÷ Title – Repeat the title that is playing. ÷ Chapter – Repeat the chapter that is playing. The A-B repeat function lets you mark a segment to repeat between the beginning “A” and the end “B” of the segment you want to replay. 1 During playback, press REPEAT on the remote.
Using the On-screen banner display 25 DVF-3530 / DV-402 CD Random play The chapters or tracks of the disc are played in random order. 1 During playback or stop mode, press RANDOM on the remote. RANDOM The Random Play display appears LED display Lit Each time you press RANDOM on the remote, random play would be on and off. The Standard Play display appears when random is off. ÷ The menu is switched off when no operation is performed for about 3 seconds.
Program play DVF-3530 / DV-402 You can listen to the desired tracks or chapters of the current disc in any desired order. Program Edit 1 During stop mode, press the P.MODE key on the remote Program edit display appears. PROGRAM EDIT P.MODE Playlist Title Chapter Add 2 All Derete (12) (2) T C Play Done 2 Select specific title/chapter or track by Press Cursor up/down (5/∞) keys or numeric keys (0-9).
Program play 27 DVF-3530 / DV-402 Insert chapter or track 1 Press the P.MODE key on the remote P.MODE Program edit display appears. PROGRAM EDIT Playlist T C Title Chapter Insert 2 All Derete 2 All Play 3 12 Done 1 8 1 All 3 5 (12) (2) 2 Select specific title/chapter or track to insert by Press Cursor up/down (5/∞) keys or numeric keys (0-9).
Set Up functions DVF-3530 / DV-402 Set up menu The initial setup of the player, which has been made at the factory, can be changed to the desired setup. 1 During stop mode, press MENU key on the remote. MENU Current setup menu display appears on the screen. Operations 2 Press Cursor up/down (5/∞) keys on the remote to select the item, then press the ENTER key to access the sub features Audio / Subtitle : This sets the language to be used when playing a disc.
Set Up functions 29 DVF-3530 / DV-402 DVD Select Audio Language DVD Select Subtitle Language 1 Press Cursor up/down (5/∞) keys on the remote to select Subtitle on the set up menu display, then press the ENTER key. (Audio menu appears.) (Subtitle menu appears.) 2 Press Cursor up/down (5/∞) keys on the remote to select specific Audio language, then press the ENTER key. 2 Press Cursor up/down (5/∞) keys on the remote to select specific Subtitle language, then press the ENTER key.
Set Up functions DVF-3530 / DV-402 DVD Select Menu Language 1 Press Cursor up/down (5/∞) keys on the remote to select Menus on the set up menu display, then press the ENTER key. DVD Select Rating This part of DVD rating lets you determine how your player will react discs that contain movies that are rated (in the U.S.A. the Motion Pictures Association of America rates movies as G, PG, PG-13, etc.).
Set Up functions 31 DVF-3530 / DV-402 DVD Password Input password 1 Press Cursor up/down (5/∞) keys on the remote to select Password on the set up menu display, then press the ENTER key. 4 Press ENTER key to finish password input (Confirm Password display appears below Enter Password display). (Password menu appears.) 2 After select “Set Password”, press the ENTER key. 6 Select OK and press the ENTER key. 3 Press Cursor up/down (5/∞) keys or numeric keys on the remote to enter password.
Set Up functions DVF-3530 / DV-402 DVD Password (continued) Change password 1 Press Cursor up/down (5/∞) keys on the remote to select Password on the set up menu display, then press the ENTER key. Operations (Enter Password menu appears.) 2 Press Cursor up/down (5/∞) keys or numeric keys on the remote to enter password. Select OK and press ENTER key. 4 Press Cursor up/down (5/∞) keys or numeric keys on the remote to enter password.
Set Up functions 33 DVF-3530 / DV-402 DVD Password (continued) Clear password 1 Press Cursor up/down (5/∞) keys on the remote to select Password on the set up menu display, then press the ENTER key. DVD TV aspect 1 Press Cursor up/down (5/∞) keys on the remote to select TV Aspect on the set up menu display, then press the ENTER key. (TV Aspect menu appears.) 2 Press Cursor up/down (5/∞) keys or numeric keys on the remote to enter password. Select OK and press ENTER key.
Set Up functions DVF-3530 / DV-402 DVD Dynamic Range 1 Press Cursor up/down (5/∞) keys on the remote to select Dynamic Range on the set up menu display, then press the ENTER key. DVD PCM Digital Audio Out : Choose this setting for all connection scenarios, except the Dolby Digital or DTS receiver or decoder connection. Dolby Digital : Choose this setting if you connected Dolby Digital receiver or decoder to your DVD player.
Knowledge 35 DVF-3530 / DV-402 DVD menu language code list Cord No. Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bengali; Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Cord No.
In case of difficulty DVF-3530 / DV-402 What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or service representative. Operation to reset The microprocessor may fall into malfunction (impossibility to operate erroneous display, etc.) when the power cord is unplugged while power is ON or due to an external factor.
In case of difficulty 37 DVF-3530 / DV-402 DVD player unit Symptom Cause Remedy Playback will not start even after a title is selected. ÷ A viewing restriction (RATING) has been set for the disc. ÷ Check the viewing restriction level (RATING) setting. The viewing restriction level (RATING) cannot be changed. ÷ You have forgotten the viewing restriction (RATING) password. ÷ Set the initial setup to the factory setup with the following procedure.
Specifications DVF-3530 / DV-402 [Type] System ................................................. DVD video player system Signal read system ..................................... Semiconductor laser COAXIAL ......................................................... 0.5 Vp-p / 75 Ω OPTICAL ............ -21 dBm ~ -15 dBm (Wave length 660 nm) [Video Section] [D/A Conversion Section] D/A conversion ..................................................................... 24 Bit Oversampling ..............
DVF-3530 / DV-402 Knowledge
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
