DVD / VCD / CD PLAYER DV-503 DVF-3550 INSTRUCTION MANUAL KENWOOD CORPORATION COMPACT DIGITAL VIDEO B60-5081-08 00 (K/P/T/M/Y) OC 01/03
Introduction DV-502/DVF-3050 (EN/K,P,T,M,Y) Before applying power Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ....................................................... AC 120V only Australia ....................................................................... AC 240 V only Europe and U.K. ............................................................ AC 230V only *Other countries ....................
Introduction 3 DV-502/DVF-3050 (EN/K,P,T,M,Y) Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage.
IMPORTANT SAFEGUARDS Caution : Read this page carefully to ensure safe operation. DV-502/DVF-3050 (EN/K,P,T,M,Y) Please read all of the safety and operating instructions before operating this appliance. Adhere to all warnings on the appliance and in the instruction manual. Follow all the safety and operating instructions. These safety and operating instructions should be retained for future reference. Preparations 1.
IMPORTANT SAFEGUARDS 5 DV-502/DVF-3050 (EN/K,P,T,M,Y) 13.Lightning – For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges. 14.Abnormal smell – If an abnormal smell or smoke is detected, immediately turn the power OFF and unplug the appliance from the wall outlet.
Special features and Contents DV-502/DVF-3050 (EN/K,P,T,M,Y) Special features This document classifies the applications of each feature using the following marks : Description of a feature that can be used with DVD. CD : Description of a feature that can be used with CD. VCD : Description of a feature that can be used with VCD.
Discs information 7 DV-502/DVF-3050 (EN/K,P,T,M,Y) Types of playable discs The system using this unit does not only play music from CD but can also play the discs listed below to offer you high-quality entertainment of video of movies and live concerts. DVD Playable Disc CD VCD COMPACT COMPACT Logo mark on disc DIGITAL VIDEO VIDEO 8cm Played sides Contents Video + Audio 8cm 12cm One or both One or both Approx. 41 min. (1 side, 1 layer) Approx. 75 min. (1 side, 2 layers) Approx. 82 min.
Region codes DV-502/DVF-3050 (EN/K,P,T,M,Y) Every player of this model has a certain region code assigned to it based on the country where the player is used. When the player is used to play back DVD discs, it can only play the DVD discs carrying the region codes matching the region code of the player. The region code for this player is described on the rear panel of the player.
Video formats 9 DV-502/DVF-3050 (EN/K,P,T,M,Y) The video signals used to display TV pictures and video disc pictures are mainly based on two types of signal formats (PAL and NTSC), which are assigned to each country or area as shown on the right. As a result, it is required to select discs according to the video format used with your TV monitor (in your country or area). TV formats of major countries TV Format NTSC PAL Major Countries & Areas Japan, Taiwan, Korea, U.S.A.
Important items DV-502/DVF-3050 (EN/K,P,T,M,Y) Maintenance Cleaning Caution against contact revitalizer Unplug this appliance from the wall outlet before cleaning. Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth. Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they may deform the plastic component.
System Connections 11 DV-502/DVF-3050 (EN/K,P,T,M,Y) Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. Caution: Do not plug in the power lead until all connections are completed. Except for U.S.A. and Canada Caution Malfunction of microcomputer Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.
System Connections DV-502/DVF-3050 (EN/K,P,T,M,Y) Connecting to a TV with Component input terminals (For other countries) TV VIDEO OUTPUT COMPONENT VIDEO OUTPUT Cr DIGITAL OUTPUT AUDIO OUTPUT (PCM/BIT STREAM) OPTICAL COAXIAL L Cb R S-VIDEO Y Preparations Audio cord Video cords Connecting to an Audio component TV (For Europe and U.K.
Controls and indicators 13 DV-502/DVF-3050 (EN/K,P,T,M,Y) INTRO SCAN indicator RESUME indicator PROGRAM indicator PLAY/PAUSE indicator RANDOM indicator SEARCH indicator Character information display section DVD indicator VCD indicator CD indicator PARENTAL LOCK indicator P.B.C. indicator Display 1 POWER ON / OFF switch 2 Disc tray 3 0 (Open/Close) key 4 1, ¡ (Search) keys % % % ^ TITLE indicator TRACK indicator CHAPTER indicator HOUR indicator MINUTE indicator SECOND indicator 5 4(PREV.
Operation of remote control unit DV-502/DVF-3050 (EN/K,P,T,M,Y) The keys on the remote control unit with the same names as on the main unit have the same function as the keys on the main unit. MENU 1 1 2 3 4 5 6 7 8 9 0 CLEAR SUBTITLE ON/OFF ON SCREEN TOP MENU 2 AUDIO ANGLE Preparations 3 4 0 ! @ # $ MULTI CONTROL 5 6 7 8 9 P.
Playback of disc 15 DV-503/DVF-3550 (EN/K,P,T,M,X) Basic play Preparation 6 (Play/Pause) key POWER TOP MENU key 7 ON OFF 7 (Stop) key 6 (PLAY/ PAUSE) key 6 0 POWER 0 (open/close) key POWER ON/ OFF switch ÷ set the POWER ON/OFF switch to the ON ( ) position. ÷ After switching the power ON, there is a delay of approx. 3 seconds until the display is lit. 7 (Stop) key 1 Load a disc Label side 1 Open the tray. 2 Place a disc. 3 Close the tray.
Playback of disc DV-503/DVF-3550 (EN/K,P,T,M,X) Disc playback features 6 (Play/Pause) key Notes 7 ÷ You won’t hear the sound (audio) on the DVD when you’re using the Skip, Search, Step or Slow motion features. ÷ Playback features are not available during the opening credits of a movie.
Using the On-screen banner display 17 DV-503/DVF-3550 (EN/K,P,T,M,X) The on-screen Banner Display contains many playback features. To see the Banner Display, press ON SCREEN key on the remote while a disc is playing. Use the Cursor (Up/Down/Left/Right) keys on the remote to move through the different features in the Banner Display. Each feature is illustrated with an icon. 1 During playback, press the ON SCREEN key on the remote.
Using the On-screen banner display DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Selecting a Title Some discs contain more than one title. For example, there might be four movies on one disc (each movie might be considered a title). DVD CD VCD SelectingaChapterorTrack Because DVD discs use digital technology, a title can be divided into individual chapters (similar to tracks on a CD). You can skip a specific chapter by using the Chapter section in the Banner Display.
Using the On-screen banner display 19 DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Changing the Audio Language DVD Changing the Subtitle Language If the disc was created with different language tracks, you can use the Banner Display to temporarily change the DVD player’s Audio setting. You can change the Subtitle language while you’re watching a disc (but only if the disc was created with subtitles).
Using the On-screen banner display DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Changing the Camera angle CD VCD Some disc contains multiple angles particular scene or sequence. If the disc only has one angle, this feature won’t work. IntroScan plays the first few seconds of each track on the CD similar to the scan feature that’s on many car radios. Using the on-screen banner display Using the on-screen banner display 1 During playback, press the ON SCREEN key on the remote.
Using the On-screen banner display 21 DV-503/DVF-3550 (EN/K,P,T,M,X) DVD CD VCD Using Bookmarks The bookmark feature lets you mark a point on the disc that you can go to quickly. You can store up to 9 bookmarks. Create the bookmark Recalling a bookmarked scene 1 During playback, press the ON SCREEN key on the remote. ON SCREEN 2 Press the Cursor left/right (2/3) keys until the BOOKMARK icon is highlighted. MULTI CONTROL 3 Press the ENTER key.
Using the On-screen banner display DV-503/DVF-3550 (EN/K,P,T,M,X) DVD CD VCD Repeat play DVD CD VCD A-B Repeat play Desired titles or discs can be played back repeatedly. There are three Repeat options: ÷ Disc – Repeat the disc that is playing. ÷ Title – Repeat the title that is playing. ÷ Chapter – Repeat the chapter that is playing. The A-B repeat function lets you mark a segment to repeat between the beginning “A” and the end “B” of the segment you want to replay.
Using the On-screen banner display 23 DV-503/DVF-3550 (EN/K,P,T,M,X) CD VCD Random play The tracks of the disc are played in random order. 1 During playback or stop mode, press RANDOM on the remote. RANDOM The Random Play display appears Display Lit RANDOM A B Each time you press RANDOM on the remote, random play would be on and off. The Standard Play display appears when random is off. ÷ The menu is switched off when no operation is performed for about 5 seconds.
DVD CD VCD Program play You can listen to the desired tracks or chapters of the current disc in any desired order. DV-503/DVF-3550 (EN/K,P,T,M,X) Program Edit 1 During stop mode, press the P.MODE key on the remote Program edit display appears. PROGRAM EDIT P.MODE Playlist Title Chapter Add 2 All Delete (12) (2) Play T C Done 2 Select specific title/chapter or track by Press Cursor up/down (5/∞) keys or numeric keys (0-9).
Program play 25 DV-503/DVF-3550 (EN/K,P,T,M,X) Insert chapter or track During stop mode, press the P.MODE key on the remote 1 Select specific title/chapter or track to insert by Press Cursor up/down (5/∞) keys or numeric keys (0-9). MULTI CONTROL 2Move the cursor with the Cursor right (‰) key to the "Playlist" and select the column to be added with the Cursor up/down (5/∞) keys.
Set Up functions DV-503/DVF-3550 (EN/K,P,T,M,X) Set up menu The initial setup of the player, which has been made at the factory, can be changed to the desired setup. 1 During stop mode or resume mode, press MENU key on the remote. MENU Current setup menu display appears on the screen.
Set Up functions 27 DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Select Audio Language DVD 1 Press Cursor up/down (5/∞) keys on the remote to select Audio on the set up menu display, then press the ENTER key. MULTI CONTROL ENTER Select Subtitle Language 1 Press Cursor up/down (5/∞) keys on the remote to select Subtitle on the set up menu display, then press the ENTER key. MULTI CONTROL ENTER (Subtitle menu appears.
Set Up functions DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Select Menu Language DVD 1 Press Cursor up/down (5/∞) keys on the remote to select Menus on the set up menu display, then press the ENTER key. MULTI CONTROL ENTER Select Rating This part of DVD rating lets you determine how your player will react discs that contain movies that are rated (in the U.S.A. the Motion Pictures Association of America rates movies as G, PG, PG-13, etc.).
Set Up functions 29 DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Password Input password 1 Press Cursor up/down (5/∞) keys on the remote to select Password on the set up menu display, then press the ENTER key. MULTI CONTROL 4 Press ENTER key to finish password input (Confirm Password display appears below Enter Password display). ENTER (Password menu appears.) 2 After select “Set Password”, press the ENTER key. MULTI CONTROL MULTI CONTROL ENTER ENTER 6 Press the ENTER key on “OK” icon.
Set Up functions DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Password (continued) Change password 1 Press Cursor up/down (5/∞) keys on the remote to select Password on the set up menu display, then press the ENTER key. 4 Press Cursor up/down (5/∞) keys or numeric keys on the remote to enter password. MULTI CONTROL MULTI CONTROL Operations (Enter Password menu appears.) 2 Press Cursor up/down (5/∞) keys or numeric keys on the remote to enter password. Press the ENTER key on “OK” icon.
Set Up functions 31 DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Password (continued) DVD Clear password 1 Press Cursor up/down (5/∞) keys on the remote to select Password on the set up menu display, then press the ENTER key. TV aspect 1 Press Cursor up/down (5/∞) keys on the remote to select TV Aspect on the set up menu display, then press the ENTER key. MULTI CONTROL MULTI CONTROL ENTER ENTER (TV Aspect menu appears.) 2 Press Cursor up/down (5/∞) keys or numeric keys on the remote to enter password.
Set Up functions DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Dynamic Range DVD 1 Press Cursor up/down (5/∞) keys on the remote to select Dynamic Range on the set up menu display, then press the ENTER key. MULTI CONTROL Digital Audio Out PCM : Choose this setting for all connection scenarios, except the Dolby Digital or DTS receiver or decoder connection. Dolby Digital : Choose this setting if you connected Dolby Digital receiver or decoder to your DVD player. ENTER DTS (Dynamic Range menu appears.
Menu playback Set Up functions 33 DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Linear PCM 96kHz => 48kHz : Even in case of 96 kHz digital signal, DVD will deliver 48 kHz signal out. (Linear PCM display appears.) 96kHz => 96kHz : In case of 96 kHz digital signal, DVD will deliver 96 kHz signal out. In this case your receiver should control 96 kHz signal. 1 Press Cursor up/down (5/∞) keys on the remote to select Linear PCM on the set up menu display, then press the ENTER key.
Menu playback DV-503/DVF-3550 (EN/K,P,T,M,X) Playback without using the menu playback function (In case of a P.B.C.-compatible VCD) (To P.B.C. On or Off) Press the TOP MENU key on the remote control unit. ÷ For the track numbers, refer to the disc jacket or other material. ÷ P.B.C. off mode : Without using menu playback function. P.B.C. off mode PBC Goes off TOP MENU To return to menu playback Press the TOP MENU key again. P.B.C.
MP3 function 35 DV-503/DVF-3550 (EN/K,P,T,M,X) Guidance of MP3 Media that can be played back with this equipment Usable media : CD-ROM, CD-R, CD-RW Usable formats : ISO9660 level 1. Files that can be played back : MP3 files Creating media for playing back on this equipment Compressing MP3 Please set up the transfer bit rate setting for the compression software when compressing MP3 files as follow. MP3 Files : 128kbps recommended (32kbps-320kbps) ÷ This unit is compatible with 32 kHz, 44.
MP3 function DV-503/DVF-3550 (EN/K,P,T,M,X) MP3 On-screen display Playing back MP3 When you insert MP3 media, the MP3 On-screen display appears. ÷ It is not possible to play back folders and files(up to 223) that exceed the maximum limitations of the media. ÷ A certain amount of time is required for the player to confirm the media on which MP3 files have been recorded before playback will commence. ÷ The files will be played back in the sequence in which they were recorded (written).
MP3 function 37 DV-503/DVF-3550 (EN/K,P,T,M,X) Selecting MP3 files or folders Selects the files to be played back directly. 1 Press Cursor up/down (5/∞) keys on the remote to select the folder, then press the ENTER key. MULTI CONTROL ÷ The files and folders in the selected folder appear. ENTER 2 Press Cursor up/down (5/∞) keys on the remote to select the file, then press the ENTER key. MULTI CONTROL ENTER Selects the folders to be played back directly.
MP3 function DV-503/DVF-3550 (EN/K,P,T,M,X) MP3 program playback You can listen to the desired files of the current MP3 disc in any desired order. Program Edit 1 During stop mode, press the P.MODE key on the remote P.MODE 2 Press Cursor up/down (5/∞) keys on the remote to select the file, then press the ENTER key. MULTI CONTROL ENTER ÷ The selected file go to program window. Operations 3 You can select maximum 1025 values by repeating step 2. 4 Press PLAY key to start program playback.
Knowledge 39 DV-402/DVF-3530 (EN/K,P,T,M,X) DVD menu language code list Cord No. Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bengali; Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Cord No.
In case of difficulty DV-402/DVF-3530 (EN/K,P,T,M,X) What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or service representative. Operation to reset The microprocessor may fall into malfunction (impossibility to operate erroneous display, etc.) when the power cord is unplugged while power is ON or due to an external factor.
In case of difficulty 41 DV-402/DVF-3530 (EN/K,P,T,M,X) DVD player unit Symptom Cause Remedy Playback will not start even after a title is selected. ÷ A viewing restriction (RATING) has been set for the disc. ÷ Check the viewing restriction level (RATING) setting. The viewing restriction level (RATING) cannot be changed. ÷ You have forgotten the viewing restriction (RATING) password. ÷ Set the initial setup to the factory setup with the following procedure.
Specifications DV-402/DVF-3530 (EN/K,P,T,M,X) [Type] System ................................................. DVD video player system Signal read system ..................................... Semiconductor laser [D/A Conversion Section] D/A conversion ..................................................................... 24 Bit Oversampling .............. 8 fs (Sampling frequency; 44.1, 48 kHz) 4 fs (Sampling frequency; 96 kHz) [Audio section] Knowledge Frequency response Sampling frequency ; 44.
DV-402/DVF-3530 (EN/K,P,T,M,X) Knowledge
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
