MULTIPLE DVD/VCD/CD PLAYER DVF-R5060 DV-605 INSTRUCTION MANUAL B60-5265-08 00 (K/P/E/T/X/Y) AP 01/10
Introduction DV-605 / DVF-R5060 (EN) Before applying power Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ......................................................... AC 120V only Other countries ........................................................... AC 110 - 240 V Preparations For the United Kingdom Factory fitted moulded mains plug 1. The mains plug contains a fuse.
Introduction 3 DV-605 / DVF-R5060 (EN) Unpacking Unpack the unit carefully and make sure that all the accessories are present. If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future. Keep this manual handy for future reference.
IMPORTANT SAFEGUARDS Caution : Read this page carefully to ensure safe operation. DV-605 / DVF-R5060 (EN) Please read all of the safety and operating instructions before operating this appliance. Adhere to all warnings on the appliance and in the instruction manual. Follow all the safety and operating instructions. These safety and operating instructions should be retained for future reference. Preparations 1.
IMPORTANT SAFEGUARDS 5 DV-605 / DVF-R5060 (EN) 13.Lightning– For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges. 14.Abnormal smell – If an abnormal smell or smoke is detected, immediately turn the power OFF and unplug the appliance from the wall outlet.
Special features and Contents DV-605 / DVF-R5060 (EN) Special features This document classifies the applications of each feature using the following marks. DVD : Description of a feature that can be used with DVD. CD : Description of a feature that can be used with CD. : Description of a feature that can be used with VCD.
Discs information 7 DV-605 / DVF-R5060 (EN) Types of playable discs The system using this unit does not only play music from CD but can also play the discs listed below to offer you high-quality entertainment of video of movies and live concerts. Playable Disc DVD VIDEO CD (CD-R, CD-RW) VCD Logo mark on disc 8cm Played sides Contents Video + Audio 12cm One or both One or both Approx. 41 min. (1 side, 1 layer) Approx. 75 min. (1 side, 2 layers) Approx. 82 min. (2 sides, 1 layer) Approx.
Region Codes DV-605 / DVF-R5060 (EN) Every player of this model has a certain region code assigned to it based on the country where the player is used. When the player is used to play back DVD VIDEO discs, it can only play the DVD VIDEO discs carrying the region codes matching the region code of the player. The region code for this player is described on the rear panel of the player.
Video formats 9 DV-605 / DVF-R5060 (EN) The TV picture display and disc signal systems can be divided roughly into two TV formats (NTSC and PAL). They are variable depending on countries and areas. TV formats of major countries TV Format Major Countries & Areas NTSC Japan, Taiwan, Korea, USA, Canada, Mexico, Philippines, Chile, etc. PAL China, U.K., Germany, Australia, New Zealand, Kuwait, Singapore, etc. (For U.S.A. , Canada and U.S. Military ) This unit reproduces NTSC discs in NTSC format.
Important items DV-605 / DVF-R5060 (EN) Maintenance Maintenance of the unit In regard to contact cleaner When the front panel or case becomes dirty, wipe with a soft, Do not use contact cleaners because it could cause a malfunction. dry cloth. Do not use thinner, benzine, alcohol, etc. for these Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component. agents may cause discoloration.
System Connections 11 DV-605 / DVF-R5060 (EN) Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. Caution: Do not plug in the power lead until all connections are completed. Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer referring to "In case of difficulty".
System Connections DV-605 / DVF-R5060 (EN) Connecting to a TV with Component input terminals (For other countries) [ For U.S.A. and Canada ] TV Select the scanning method of the Component Video output using the COMPONENT VIDEO OUTPUT switch on the rear panel. COMPONENT VIDEO OUTPUT Cr VIDEO AUDIO OUTPUT OUTPUT Cb COAXIAL OPTICAL L R Y INTERLACE S-VIDEO INTERLACE: Scanning method is fixed at interlaced scanning.
Controls and indicators 13 DV-605 / DVF-R5060 (EN) PLAY/PAUSE indicator TITLE indicator CHAPTER indicator TRACK indicator HOUR indicator MINUTE indicator SECOND indicator PARENTAL LOCK indicator REPEAT indicators REPEAT REPEAT 1 DISC REPEAT ALL DISC REPEAT A-B RANDOM indicator DISC NUMBER indicators Preparations PROGRAM indicator INTRO SCAN indicator P.B.C. indicator Display SEQ.
Operation of remote control unit DV-605 / DVF-R5060 (EN) The keys on the remote control unit with the same names as on the main unit have the same function as the keys on the main unit. 1 Preparations 2 3 4 5 6 7 8 9 0 ! MENU DISC 2 3 4 5 SEQ. MODE 6 7 8 9 DISC SKIP 0 CLEAR SUBTITLE ON/OFF 1 DISC ON SCREEN TOP MENU AUDIO ANGLE SHIFT @ # $ % ^ 1 Numeric keys ) 2 CLEAR key ( 3 DISC SKIP key ^* * 4 SHIFT key ¡ 5 SUBTITLE key & 7 6 MULTI CONTROL P.
DV-605 / DVF-R5060 (EN) Preparations
Playback of disc Using the On-screen banner display DV-605 / DVF-R5060 (EN) Basic play DISC SKIP key Preparation 6 (Play/Pause) key TOP MENU key DISC SKIP key POWER MAIN UNIT POWER ON/ OFF switch ON OFF ÷ Set the POWER ON/OFF switch to the ON ( ) position. ÷ After the power is switched ON, there is a delay of about 3 seconds before the display is lit. Disc tray 7 (Stop) key 0 (open/close) key 7 (Stop) key 6 (Play/Pause) key 1 Load a disc. Label side 1 Open the tray.
Using the On-screenPlayback banner display of disc 17 DV-605 / DVF-R5060 (EN) Disc playback features SLOW keys STEP keys Notes ÷ You won't hear the sound (audio) on the DVD when you're using the Skip, Search, Step or Slow motion features. ÷ Playback features are not available during the opening credits of a movie.
Using the On-screenPlayback banner display of disc DV-605 / DVF-R5060 (EN) DVD CD VCD Playing discs by changing them MAIN UNIT MAIN UNIT REMOTE REMOTE ÷ Press DISC SKIP key to skip a disc. ÷ When the DISC SKIP key is pressed while the tray open, the tray simply rotates. DISC SKIP DVD CD VCD Playing from the selected disc MAIN UNIT DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 ÷ Press one of DISC1 to DISC5 key to select a disc.
Using the On-screen banner display Using the On-screen banner display 19 DV-605 / DVF-R5060 (EN) The on-screen Banner Display contains many playback features. To see the Banner Display, press ON SCREEN key on the remote while a disc is playing. Use the Cursor (2/3) keys on the remote to move through the different features in the Banner Display. Each feature is illustrated with an icon. 1 During playback, press the ON SCREEN key on When playing a DVD the remote.
Using the On-screen banner display DV-605 / DVF-R5060 (EN) DVD Selecting a Title DVD CD VCD Selecting a Chapter or Track Some discs contain more than one title. For example, there might be four movies on one disc (each movie might be considered a title). Because DVD VIDEO discs use digital technology, a title can be divided into individual chapters (similar to tracks on a CD). You can skip a specific chapter by using the Chapter section in the Banner Display.
Using the On-screen banner display 21 DV-605 / DVF-R5060 (EN) DVD Select Audio Language DVD Select Subtitle Language If the disc was created with different language tracks, you can use the Banner Display to temporarily change the DVD player’s Audio setting. You can change the Subtitle language while you’re watching a disc (but only if the disc was created with subtitles).
Using the On-screen banner display DV-605 / DVF-R5060 (EN) DVD Select Camera angle CD VCD Using IntroScan function Some disc contains multiple angles particular scene or sequence. If the disc only has one angle, this feature won’t work. IntroScan plays the first few seconds of each track on the CD similar to the scan feature that's on many car radios. Using the on-screen banner display Using the on-screen banner display 1 During playback, press the ON SCREEN key on the remote.
Using the On-screen banner display 23 DV-605 / DVF-R5060 (EN) DVD CD VCD Using Bookmarks The bookmark feature lets you mark a point on the disc that you can go to quickly. You can store up to 9 bookmarks. Create the bookmark Recalling a bookmarked scene 1 During playback, press the ON SCREEN key on the remote. 1 During playback, press the ON SCREEN key on the remote. ON SCREEN 2 Press the Cursor left/right (2/3) keys until the BOOKMARK icon is highlighted. MULTI CONTROL 3 Press the ENTER key.
Using the On-screen banner display DV-605 / DVF-R5060 (EN) DVD CD VCD Repeat play Desired titles or discs can be played back repeatedly. ÷ ÷ ÷ ÷ ÷ "Repeat All Discs" : Repeat all disc in tray that is playing. "Repeat 1 Disc" : Repeat the disc that is playing. "Repeat Title" : Repeat the title that is playing. "Repeat Chapter" : Repeat the chapter that is playing. "Repeat Track" : Repeat the track that is playing. During playback, press the REPEAT key on the remote.
Using the On-screen banner display 25 DV-605 / DVF-R5060 (EN) CD VCD Random play The tracks of the disc are played in random order. During playback or stop mode, press RANDOM key on the remote. RANDOM The Random Play display appears Lit To repeat random play During random playback, press the REPEAT key on the remote. Display Each time you press RANDOM key on the remote, random play would be on and off.
DVD CD VCD Program play Using the On-screen banner display DV-605 / DVF-R5060 (EN) You can listen to the desired tracks or chapters of the current disc in any desired order. Registering and playing the program Insert all of the discs to be used in programming in the tray, close it and press the DISC 1 to 5 keys so that the player reads the disc information by playing each disc until display "READING" disappears.
Using the On-screen banner Program display play 27 DV-605 / DVF-R5060 (EN) Insert chapter or track During stop mode, press the P.MODE key on the remote 1 Select specific disc/ title/ chapter or track to insert by Press Cursor up/down (5/∞) keys or numeric keys (0-9). Program edit display appears. MULTI CONTROL PROGRAM EDIT 2 Move the cursor with the Cursor right (3) key to the "Playlist" and select the column to be added with the Cursor up/down (5/∞) keys.
Set Up functions Set Up functions DV-605 / DVF-R5060 (EN) Set up menu The initial setup of the player, which has been made at the factory, can be changed to the desired setup. 1 During stop mode or resume mode, press MENU key on the remote. MENU Current setup menu display appears on the screen.
Set Up functions 29 DV-605 / DVF-R5060 (EN) DVD Select Audio Language 1 Press Cursor up/down (5/∞) keys on the remote to select "Audio" on the set up menu display, then press the ENTER key. ENTER MULTI CONTROL DVD Select Subtitle Language 1 Press Cursor up/down (5/∞) keys on the remote to select "Subtitles" on the set up menu display, then press the ENTER key. ENTER MULTI CONTROL (Subtitle menu appears.
Set Up functions DV-605 / DVF-R5060 (EN) DVD Select Menu Language 1 Press Cursor up/down (5/∞) keys on the remote to select "Menus" on the set up menu display, then press the ENTER key. MULTI CONTROL DVD Select Rating This part of DVD rating lets you determine how your player will react discs that contain movies that are rated (in the U.S.A. the Motion Pictures Association of America rates movies as G, PG, PG-13, etc.).
Set Up functions 31 DV-605 / DVF-R5060 (EN) DVD Password Set password 1 Press Cursor up/down (5/∞) keys on the remote 4 Press ENTER key to finish password input (Con- to select "Password" on the set up menu display, then press the ENTER key. firm Password display appears below Enter Password display). MULTI CONTROL ENTER (Password menu appeaars.) 5 Press Cursor up/down (5/∞) keys or numeric keys on the remote to enter again password that you entered.
Set Up functions DV-605 / DVF-R5060 (EN) DVD Password (continued) Change password 1 Press Cursor up/down (5/∞) keys on the remote to select "Password" on the set up menu display, then press the ENTER key. 4 Press Cursor up/down (5/∞) keys or numeric keys on the remote to enter password. MULTI CONTROL MULTI CONTROL ENTER 5 Press ENTER key to finish password input (Confirm Password display appears below Enter Password display). Operations (Enter Password menu appears.
Set Up functions 33 DV-605 / DVF-R5060 (EN) DVD Password (continued) Clear password 1 Press Cursor up/down (5/∞) keys on the remote to select "Password" on the set up menu display, then press the ENTER key. DVD TV aspect 1 Press Cursor up/down (5/∞) keys on the remote to select "TV Aspect" on the set up menu display, then press the ENTER key. MULTI CONTROL MULTI CONTROL ENTER ENTER (TV Aspect menu appears.
Set Up functions DV-605 / DVF-R5060 (EN) DVD Dynamic Range DVD 1 Press Cursor up/down (5/∞) keys on the remote to select "Dynamic Range" on the set up menu display, then press the ENTER key. MULTI CONTROL ENTER Digital Audio Out PCM : Choose this setting for all connection scenarios, except the Dolby Digital or DTS receiver or decoder connection. Dolby Digital : Choose this setting if you connected Dolby Digital receiver or decoder to your DVD player.
Set Up functions 35 DV-605 / DVF-R5060 (EN) DVD Linear PCM 96kHz => 48kHz : Even in case of 96 kHz digital signal, DVD will deliver 48 kHz signal out. 96kHz => 96kHz : In case of 96 kHz digital signal, DVD will deliver 96 kHz signal out. In this case your receiver should control 96 kHz signal. 1 Press Cursor up/down (5/∞) keys on the remote to select "Linear PCM" on the set up menu display, then press the ENTER key. MULTI CONTROL ENTER (Linear PCM display appears.
Menu playback Set Up functions DV-605 / DVF-R5060 (EN) VCD Hierarchical structure of VCD menus When an item is selected on the menu screen during playback of a P.B.C.-compatible VCD, another menu with more details items may be displayed. When a number of menus are connected in multiple layers in this way, it is said that the menus have a hierarchical structure. In this structure, the desired scene can be reached by repeating item selections on the menu screens.
Set Menu Up functions playback 37 DV-605 / DVF-R5060 (EN) VCD Playback without using the menu playback function (In case of a P.B.C.-compatible VCD) (To P.B.C. On or Off) During VCD stop mode or play mode, Press the TOP MENU key on the remote control unit. ÷ For the track numbers, refer to the disc jacket or other material. ÷ P.B.C. off mode : Without using menu playback function. P.B.C. off mode Goes off TOP MENU To return to menu playback Press the TOP MENU key again. P.B.C.
MP3 function Set Up functions DV-605 / DVF-R5060 (EN) Guidance of MP3 MP3 media that can be played back with this equipment Usable media : CD-ROM, CD-R, CD-RW Usable formats : ISO9660 level 1 (excluding expanded formats) Files that can be played back : MP3 files Creating media for playing back on this equipment Compressing MP3 Please set up the transfer bit rate setting for the compression software when compressing MP3 files as follow.
SetMP3 Up functions function 39 DV-605 / DVF-R5060 (EN) Playing back MP3 ÷ It is not possible to play back folders and files(up to 223) that exceed the maximum limitations of the media. ÷ A certain amount of time is required for the player to confirm the media on which MP3 files have been recorded before playback will commence. ÷ The files will be played back in the sequence in which they were recorded (written).
SetMP3 Up functions function DV-605 / DVF-R5060 (EN) Selecting MP3 files 1 Press Cursor up/down (5/∞) keys on the remote to select the folder, then press the ENTER key. ÷ The files and folders in the selected folder appear. M P3 LIKE-1 Standard Play 1 0:05:34 LIKE-1 LUCKY-1 LET IT-1 ENTER MULTI CONTROL YESTERDA TRUE-1 OPEN-1 WHIHE-1 WHIHE-2 NEVER-2 2 Press Cursor up/down (5/∞) keys on the remote to select the file, then press the ENTER key.
SetMP3 Up functions function 41 DV-605 / DVF-R5060 (EN) MP3 Repeat play Desired folders or discs can be played back repeatedly. Each press the key switches the REPEAT mode ÷ "Repeat All Discs" : Repeat all disc in tray that is playing. ÷ "Repeat 1 Disc" : Repeat the disc that is playing. 1 "Repeat All Discs": Display lit "REPEAT ALL DISCS" ÷ "Repeat 1 Folder" : Repeat the folder that is playing. 3 "Repeat 1 Folder" : Display lit "REPEAT" ÷ "Repeat Track" : Repeat the file that is playing.
SetMP3 Up functions function DV-605 / DVF-R5060 (EN) MP3 program playback You can listen to the desired files of the current MP3 disc in any desired order. Program Edit 1 During stop mode, press the P.MODE key on the remote. Lit P.MODE Display 2 Press Cursor up/down (5/∞) keys on the remote to select the file, then press the ENTER key. M P3 LIKE-1 Program Edit Operations MULTI CONTROL ENTER ÷ The selected file go to program window.
DVD menu language code list Set Up functions 43 DV-605 / DVF-R5060 (EN) Cord No. Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bengali; Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Cord No.
In case of difficulty DV-605 / DVF-R5060 (EN) What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or service representative. Operation to reset The microprocessor may fall into malfunction (impossibility to operate erroneous display, etc.) when the power cord is unplugged while power is ON or due to an external factor.
In case of difficulty 45 DV-605 / DVF-R5060 (EN) DVD player unit Symptom Cause Remedy Playback will not start even after a title is selected. ÷ A viewing restriction (RATING) has been set for the disc. ÷ Check the viewing restriction level (RATING) setting. The viewing restriction level (RATING) cannot be changed. ÷ You have forgotten the viewing restriction (RATING) password. ÷ Set the initial setup to the factory setup with the following procedure.
Specifications DV-605 / DVF-R5060 (EN) [Type] System .................................... DVD video player system Signal read system ......................... Semiconductor laser [D/A Conversion Section] D/A conversion ........................................................ 24 Bit Oversampling ... 8 fs (Sampling frequency; 44.1, 48 kHz) ......................... 4 fs (Sampling frequency; 96 kHz) [General] Power consumption .................................................. 20 W Dimensions ...........
DV-605 / DVF-R5060 (EN) Knowledge
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.