MONITOR WITH DVD RECEIVER DDX8017 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD Receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents Before Use .................................................... 4 Notes on playing MP3/WMA/JPEG/MPEG.. 6 DDX8017 Basic operation ........................... 8 Basic Operations of Remote Controller ... 10 About discs ................................................. 13 Switching Screen Mode ............................. 14 Muting Audio Volume upon Reception of Phone call ...............................................
Source Select.............................................. 58 Displaying the Control screen Displaying the Source Select screen Adjusting the Monitor Display Position and Quality ............................................. 59 Displaying the Screen Control screen Displaying the Tilt Adjust screen Setup Menu ................................................ 60 Setup Menu ............................................................
Before Use 2WARNING Audio units you can control from the DDX8017 Receiver (As of June, 2005): To prevent injury or fire, take the following precautions: KTC-V500N, KTC-SR901, KTC-SR902, KTC-SR903, KTC-HR100, KTC-HR100MC, KTC-HR100TR, KHD-CX910, KHD-C710, KTC-WB100, KDC-C719, KDC-C669, KDC-C469, KDV-C810, KDC-CX89, KDC-CX87, KDC-C717, KDC-C667, KDC-C467, KDC-D301, KDC-CX85, KDC-C715, KDC-C665, KDC-C465, KDC-CX82, KDC-C712, KDC-662, KDC-D300, KMD-D400, KTC-9090DAB (Set the "O-N" switch to "N" position if p
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. 1 5 2 6 1 2 3 1 4 5 2 4 Icons on the DVD discs Icon Description Indicates the region code where the disc can be played. 8 Number of voice languages recorded with the audio function. The number in the icon indicates the number of voice languages. (Max. 8 languages) 32 Number of subtitle languages recorded with the subtitle function.
Notes on playing MP3/WMA/JPEG/MPEG This unit can play MP3 (MPEG1 Audio Layer 3)/ WMA/JPEG/MPEG (MPEG 1/MPEG 2). Note, however, that the MP3/WMA/JPEG/MPEG recording media and formats acceptable are limited. When writing MP3/WMA/JPEG/MPEG, pay attention to the following restrictions. Acceptable media The MP3/WMA/JPEG/MPEG recording media acceptable to this unit are CD-ROM, CD-R, CD-RW,DVD-R/RW and DVD+R/ RW. When using CD-RW, do full format not quick format to prevent malfunction.
MP3/WMA/JPEG/MPEG playing order When selected for play, Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD/DVD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
DDX8017 Basic operations AUTO 1 Play Disc [Disc insertion slot] A disc is played when you insert it. 3 Eject Disc [EJECT] key The disc is ejected. 2 Play/Pause [38] key Pauses and replays a disc. 8 | English B64-3185-00_(En).indd Sec1:8 05.5.
4 Video Source Selection [V.SEL] key Video source selection changes in the following order each time you press the key. DVD/VCD 7 Track/Station Selectors [SEEK] key Selects a music or chapter, track, or frequency. 8 Attenuator [ATT] key Attenuates the volume. Press it again to cancel muting. 9 Select Seek Mode [AUTO] key Selects the Seek mode.
Basic Operations of Remote Controller 2 NAV 14 CANCEL MENU 4 TV DVD AUD 18 ENTER 15 BAND+ u ATT 4 ¢ ZOOM IN POSITION 38 RETURN – BAND+ u ATT 4 ¢ ZOOM OUT VOL 7 d CANCEL MENU 6 VOL ENTER RETURN – ZOOM OUT SR C SR C TV DVD AUD 1 5 L SE V. L SE V. 3 NAV d ZOOM IN POSITION 8 38 17 9 MODE PBC ROUTEM VIEW MENU MAPDIR AV OUT TOP MENU 12 VOICE 2-ZONE SC1 ZOOM SC2 OPEN u 13 16 1 .
6 [BAND] key DISC (When 1 is set to "DVD" or "AUD") +: Selects next disc. –: Selects previous disc. TV (When 1 is set to "TV" or "AUD") BAND: Switches to TV1, TV2, VIDEO1, or VIDEO2. TUNER (When 1 is set to "AUD") +: Switches to the FM1, FM2, or FM3 band. –: Switches to the AM band. Selects the icon. TV TUNER NAV DISC TV TUNER You can adjust the rear channel volume when Zone function is on. r [MENU] key DVD (When 1 is set to "DVD") Stops to play the built-in disc play.
Basic Operations of Remote Controller o [0] – [9] key TV (When 1 is set to "TV") TUNER (When 1 is set to "AUD") — : Recall the stations on memory.. 1 .? & 6 MNO [ ]/[ ] key DVD (When 1 is set to "DVD") : Slow Backward. : Slow Forward. NAV You can enter a character/number. [SUBTITLE] key DVD (When 1 is set to "DVD") : Switches a subtitle language. 6 MNO [AUDIO] key DVD (When 1 is set to "DVD") : Switches an audio language. 2 DEF [1]/[¡] key DVD VCD (When 1 is set to "DVD") 1: Fast Backward (Rewind).
About discs Handling discs Removing discs • Do not touch the recording surface of the disc. When removing discs from this unit pull them out horizontally. Discs that can not be used • Discs that are not round can not be used. • CD-R/RW, DVD-R/RW, and DVD+R/RW discs are easier to be damaged than a ordinary music CD. Use a CD-R/RW, DVDR/RW, or DVD+R/RW disc after reading the cautions on the package. • Do not stick a tape, sticker, etc., on the disc.
Switching Screen Mode The Screen mode of the monitor changes each time the [MODE] key is pressed. [MODE] key AUTO Full picture mode (FULL) Justify picture mode (JUST) Cinema picture mode (CINEMA) Zoom picture mode (ZOOM) Normal picture mode (NORMAL) • When you select the Menu, Easy Control screen, or Navigation, the display is shown in the full-size display mode automatically. The screen mode of these displays cannot be changed.
Muting Audio Volume upon Reception of Phone call Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen MENU CALL CALL If you want to continue to listen to the audio source during phone call... The system resumes audio play during the phone call. When the call ends... Hang up the phone.
Control during Controlling during DVDDVD Video, Video, DVDVideo Audio CD, orJPEG VideoorCD MPEG Playback Playback Various control screens appear when you play back a DVD Video (DVD), a Video CD (VCD) disc or a JPEG, a MPEG files. Displaying the DVD/VCD/JPEG/MPEG Playback screen You can use the following operations when displaying DVD/VCD/JPEG/MPEG images. 4 Forward Chapter Search Area Selects the next chapter. Plays back the DVD/ VCD or JPEG/MPEG files.
Before Use JPEG/MPEG playback screen DVD MEDIA 13 3 Mode: FULL 15 P 0:01:48 1 18 AVOUT: TV 16 14 e Folder/File Number Display r Forword File Search Area Selects the next folder or file. t Backword File Search Area Selects the previous folder or file. y Picture Control Button Area (page 21) JPEG playback only. 17 u Information Display Button Area (page 21) i Play Time Display • The Easy control panel functions are seeing page 22.
Control during DVD Video, DVD Audio or Video CD Playback Displaying the DVD/VCD Control screen f Ejects the disc from the built-in disc player. Plays a DVD/VCD using various functions. g Calls the Sound Effects Menu. (page 88) h Displays the Source Select screen. (page 58) j Calls the Setup Menu. (page 60) k Fast Forwards or Fast Backwards. DVD/VCD Control screen l Stops to play. When pressed twice, the disc is played from its beginning when you play it in the next time.
Controlling during DVD Video, Video CD, JPEG or MPEG Playback English | B64-3185-00_(En).indd Sec1:19 19 05.5.
DVD Disc Menu 2 Disc Menu Selects an option from the DVD Disc Menu. 1 Select Disc Menu options Display the Disc Menu Control screen Cancel DVD Disc Menu Control Buttons Area (page 16) ANGLE 2 MENU Ctrl 1 Menu Control TOP 3 MENU Menu 6 1/1 AUDIO 4 1/1 5 3 ZOOM Enter SUB 3 RTN Top 1 3 4 1/1 7 Highlight 3 2 5 6 Exit 8 Cancel Exit 1 Calls the Menu. 2 Returns to the Disc Menu Control screen. 3 Selects a menu option. 4 Enters your menu selection.
Controlling during DVD Video, Video CD, JPEG or MPEG Playback VCD Zoom Control Information Display Displays an enlarged VCD screen. Displays the DVD and AV information. 1 Display the Zoom Control screen Information Display Button Area (page 16,17) Zoom Control Button Area (page 16) The information is displayed for 5 seconds. Zoom Control Top 2 2 2 Direct Search You can search for a DVD/VCD chapter, scene or track by entering its number.
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control You can recall various control screens during CD/MP3/WMA/JPEG/MPEG/Disc Changer playback. Displaying the Easy Control Panel The CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Panel is displayed in a floating position of the selected picture. 1 Switches the source. 2 Stops to play the built-in disc player. 3 Fast Forwards or Fast Backwards. (only when a CD is played back on the built-in disc player). 4 Selects a track or data.
Displaying the CD/MP3/WMA/JPEG/ MPEG/Disc Changer Control screen You can play the CD/MP3/WMA/JPEG/MPEG/Disc changer using various functions. During CD playback 8 Calls the CD/MP3/WMA/JPEG/MPEG/Disc Changer Menu. 9 Calls the Sound Effects Menu. (page 88) p Displays the Source Select screen. (page 58) q Calls the Setup Menu. (page 60) CD Control screen w Ejects the disc from the built-in disc player. MENU 8 12 9 10 13 14 15 r Selects a track.
MP3/WMA/JPEG/MPEG Control screen During MP3/WMA/JPEG/MPEG play MENU 29 28 29 31 k Ejects a disc. 30 32 l Fast Forwards or Fast Backwards. ( Disabled when a JPEG is being played.) 31 Direct SRC Next 34 41 SCN 39 33 43 33 DVD MEDIA REP 3 35 Folder - RDM 36 Folder + DISP 37 SCRL 42 P 00:03:24 1 - AM 12:56 45 - 38 FREP 40 - - - - 44 IN / Stops to play. When pressed twice, the disc is played back from its beginning in the next time. z Selects a song or data.
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Disc Changer Control screen During play by the disc changer MENU Disc + 46 Y Selects a track. Starts Fast Forward or Fast Backward when it is held down. 47 48 46 Direct SRC Next 49 SCN 54 REP 58 D 3 RDM 51 T 5 59 47 CD-CH Disc 50 - DISP 55 SCRL 60 P 01:24 TIME DREP 52 MRDM 53 - - AM - U Selects a disc. 57 12:56 62 - 56 I Plays or pauses.
Displaying the CD/MP3/WMA/JPEG/ MPEG Disc Changer Menu screen You can select menu options using various functions. Selects options from various function menus. Returns to the CD/MP3/WMA/JPEG/MPEG/Disc Changer Control screen. MENU • The available functions vary depending on the source used. CD Menu screen Name Set 63 MENU 64 26 | English B64-3185-00_(En).indd Sec1:26 05.5.
Before Use CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Set Disc Name Select Folder (during MP3/WMA/JPEG/ MPEG play) Names a CD. 1 2 Play a CD you wish to name Call the CD/Disc Changer Menu The folders of an MP3/WMA/JPEG/MPEG disc are listed for quick search. 1 Call the MP3/WMA/JPEG/MPEG Menu MENU MENU 3 Select the Set Name mode 2 Start the Select Folder Name Set Folder Select 2. Upper Folder Name MENU 1 • The Name Set position varies depending on the disc you are playing.
ID3/WMA TAG Display (during MP3/ WMA play) Disc Select (during play by disc changer) The ID3/WMA TAG information of MP3/WMA file is listed. The discs loaded on the disc changer are listed for quick disc selection. 1 1 Call the MP3/WMA/JPEG/MPEG Menu Call the Disc Changer Menu MENU 2 MENU Display the ID3/WMA TAG 2 Call the Disc Select Menu CH Disc Select Infomation MENU MENU Title: KENWOOD 2 1.KENWOOD DISP 1 2.KENWOOD Artist: KENWOOD 1 3.KENWOOD Album: 4.
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control Direct Search Searches for a disc or a track when its number is entered. During play on the built-in disc player 1 Select the Direct Search mode # BS DIRECT The following items can be searched directly each time it is pressed.
Tuner Control Various control screens appear in the Tuner Source mode. Displaying the Easy Control Panel The Tuner Control Panel is displayed in a floating position of the selected picture. 1 Switches the source. 2 Switches the band (to AM or FM1/2/3). 3 Tunes in a station 4 Switches the Seek mode. (see page 32 for the ) Displaying the Easy Control Panel • For receiver key operations, see (page 8).
u Selects the Program Service Name, Station Name, or Radio Text mode for text display. i Scrolls the display text. o When 1 to 6 buttons appear, you can recall the stations on memory. For memory of broadcasting stations, see (page 32) or (page 32). ; Indicates current Seek mode. a Clock Display When touched, the display of Clock 1, Clock 2 and Clock 3 are switched one after the other.
Seek Mode Manual Memory Sets a station selection. Stores the current receiving station in memory. 1 Select a station you wish to store in memory SEEK FM If SEEK is not shown, touch Next . The mode is switched in following order each time you touch the button. Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually. AUTO 1 AUTO 2 MANUAL 2 AM Store in memory 1 — 6 If 1 to 6 are not shown, touch Next .
Tuner Control Preset Select Set Station Name Lists and tunes in stations in memory one after the other. Names a station. 1 1 Select a station you wish to name Call the Tuner Menu FM AM MENU 2 2 Call the Tuner Menu Call the Preset Select Menu MENU Preset Select MENU P1 87.9 MHz 1 3 Select the Set Name mode 4 5 DISP P2 90.1 MHz Name Set P3 98.1 MHz P4 87.9 MHz 2 3 2 FM 1 TUNER 4 P5 87.9 MHz FM1 For character entry details, see (page 57). P6 87.
Direct Search Traffic Information Tunes in a station when its frequency is entered. When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. 1 Select a band – 2 BAND+ When the traffic bulletin starts... Select the Direct Search mode The Traffic Information screen appears automatically. Traffic Information screen # BS MENU DIRECT 3 1 3 TI Enter frequency 0 — 9 WXYZ 2 When you enter frequency, signal reception starts.
Tuner Control Search for Program Type Radio Text A program is tuned when you set its program type. (Only when receiving the FM broad cast.) You can display the radio text. (Only when receiving the FM broad cast.) 1 1 Call the Tuner Menu Call the Tuner Menu MENU MENU 2 2 Call the PTY Search Menu Display the Radio Text Radio-Text PTY Search 1 MENU 5 MENU 2 2 INFORMATION SRCH 3 SPORTS USER 4 TALK ROCK 2 FM 1 None 1 NEWS Preset 3 RadioText TUNER 98.
TV/ Video Control Various control screens appear in the TV/ Video Source mode. (You can only operate TV with the optional accessory TV Tuner connected.) Displaying the TV Picture screen 1 TV Band Number Display Various control screens appear in the TV Source mode. 2 Memory Number Display 3 Channel Number Display Select the TV Pictures. 4 Channel Up Area Increase the channel. 5 Channel Down Area Decrease the channel.
Displaying the TV Control screen e Calls the TV Menu. You can tune in a TV station using various functions. r Calls the Sound Effects Menu. (page 88) t Displays the Source Select screen. (page 58) y Calls the Setup Menu. (page 60) u Switches to VIDEO1 or VIDEO2. i Switches to TV1 or TV2. TV Control screen MENU 13 14 Direct VIDEO 15 19 SRC 16 Next - 17 19 TV 20 AME 21 SEEK 22 - 18 - TV - 2 ch 25 AM TV1 AUTO1 1 2 12:56 24 3 4 5 6 23 o Select a channel.
Displaying the TV Menu screen You can select menu options using various functions. h Selects options from various function menus. j Returns to the TV Control screen. MENU TV Menu screen Preset Select 26 MENU Name Set 27 TV 38 | English B64-3185-00_(En).indd Sec1:38 05.5.
Before Use TV/Video Control Seek Mode Auto Memory Sets a TV station selection. Stores stations with good reception in memory automatically. SEEK 1 If SEEK is not shown, touch Next . The mode is switched in following order each time you touch the button. AUTO 1 AUTO 2 MANUAL Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next channel manually.
Before Use Manual Memory Preset Select Stores the current receiving channel in memory. Lists and tunes in stations in memory one after the other. 1 Select a channel you wish to store in memory 1 Call the TV Menu TV MENU 2 (Page 37 e) Store in memory 2 1 — Call the Preset Select Menu 6 If 1 to 6 are not shown, touch Next . Continue to touch until the memory number appears.
TV/Video Control Set Station Name Direct Search Names a station. Tunes in a station when its channel number is entered. 1 Select a station you wish to name 1 Select the Direct Search mode TV # BS DIRECT 2 Call the TV Menu 2 MENU Enter a channel number (Page 37 e) 0 3 When you enter a channel number, signal reception starts. Example: When you receive Channel 06 0 6 MNO Enter a name For character entry details, see (page 57).
SIRIUS Tuner Control Various control screens appear in the SIRIUS Tuner source mode. (with the optional accessory SIRIUS Tuner connected only) Displaying the Easy Control Panel The SIRIUS Tuner Control Panel is displayed in a floating position of the selected picture. 1 Switches the source. 2 Switches the band. 3 Tunes in a channel. 4 Switches the Seek mode. SEEK 1: Tunes channels one after the other. SEEK 2: Selects channels in memory one after the other.
y When 1 to 6 buttons appear, you can recall the channel on memory. For memory of channel stations, see (page 44) . u Indicates current Seek mode. i Clock Display When touched, the display of Clock 1, Clock 2, and Clock 3 are switched one after the other. Displaying the SIRIUS Tuner Menu You can select menu options using various functions. MENU o Selects options from various function menus. ; Returns to the SIRIUS Tuner Control screen.
Channel Search 3 Select a category The categories and channels are listed for your channel selection. 1 Call the SIRIUS Tuner Menu The channel list of the selected category appears. Channel Selection screen MENU MENU 2 etc. cat.HITS 0 1 ch.Pure Jazz 4 Start Channel Searching ch.Jazz En Clave ch.Planet Jazz Channel Search SIRIUS 2 ch.Jazz Cafe ch.Standard Time The category list appears. RTN 3 2 Category Selection screen MENU 3 cat.HITS 0 1 1 Tunes in a channel.
SIRIUS Tuner Control Direct Channel Search Information Display A channel is tuned when you enter its number. The tuned program information is displayed.
HD Radio Control Various control screens appear in the HD Radio Source mode. (with the optional accessory HD Radio Tuner connected only) Displaying the Easy Control Panel 1 Switches the source. The HD Radio Control Panel is displayed in a floating position of the selected picture. 2 Switches the band (HD FM1/2/3, HD AM). 3 Tunes in a station. 4 Switches the Seek mode.
u When 1 to 6 buttons appear, you can recall the stations on memory. For memory of broadcasting stations, see (page 48) or (page 48). i Indicates current Seek mode. o M/S Indicator ; Clock Display When touched, the display of Clock 1, Clock 2, and Clock 3 are switched one after the other. Displaying the HD Radio Menu screen You can select menu options using various functions. MENU a Selects options from various function menus. s Returns to the HD Radio Control screen.
Seek Mode Manual Memory Sets a station selection. Stores the current receiving station in memory. 1 Select a station you wish to store in memory SEEK HD FM If SEEK is not shown, touch Next . The mode is switched in following order each time you touch the button. Tunes in a station or channel with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency or channel manually.
HD Radio Control Receive Mode Title Display The digital or analog program is selected and received. An information about the received song is displayed. 1 1 Call the HD Radio Menu Call the HD Radio Menu MENU 2 MENU 2 Call the Receive mode Menu Display the Title screen Receive Mode Title MENU Title screen 3 Receive Mode 1 Auto 2 1 MENU 3 2 HD RADIO 2 2 1 Receive mode Display. 2 Switches the Receive mode. 3 Returns to the HD Radio Menu.
DAB Tuner control Various control screens appear in the DAB Tuner source mode. (with the optional accessory DAB Tuner connected only) Displaying the Easy Control Panel 1 Switches the source. The DAB Tuner Control Panel is displayed in a floating position of the selected picture. 2 Switches the band (to DAB1/2/3). 3 Selects a service. 4 Selects the Ensemble. 5 Switches the Seek mode.
i When 1 to 6 buttons appear, you can recall a service on memory. o Indicates current Seek mode. ; Clock Display When touched, the display of Clock 1, Clock 2, and Clock 3 are switched one after the other. Displaying the DAB Tuner Menu screen You can select menu options using various functions. a Selects options from various function menus. s Returns to the DAB Tuner Control screen. • For DAB Tuner function details, see the Instruction Manual of DAB Tuner (optional accessory).
Seek Mode Service Preset Memory A service selection method can be set. The current receiving service is stored in memory. 1 Select a service you wish to store in memory SEEK Band If SEEK is not shown, touch Next . The mode is switched in following order each time you touch the button. Tunes in a ensemble with good reception automatically. Tunes in service in memory one after another. Switches to the next channel manually.
DAB Tuner control Service Select Language Filter The service list of the currently receiving ensemble is displayed for your selection. The languages are list for your selection. 1 1 Call the DAB Tuner Menu Call the DAB Tuner Menu MENU MENU 2 2 Call the Language Filter Menu Call the Service Select Menu Language Filter Service Select MENU MENU 3 Service Name 3 1 Language Service Name LANG Filter Off 1 Service Name 2 SRCH 2 DAB Service Name Service Name 2 1 Selects a service.
Search for Program Type 3 Select a program type The services are received when you set its program type. 1 Call the DAB Tuner Menu Select a Language 1. Display the Language select screen MENU 2 LANG Call the PTY Search Menu MENU PTY Search PTY News SRCH MENU 4 2 Language English PTY News 1 1 SRCH LANG 1 2 1 DAB RTN 3 3 DAB 1 Selects a Language. 2 Searches for the program type. 3 Returns to the PTY Search Menu. 1 Selects a program type. 2 Searches for the program type.
DAB Tuner control DAB Information DAB Announcement The DAB information is displayed. When the Announcement you have turned on starts, any source is switched to the Announcement automatically. 1 Call the DAB Tuner Menu When the announcement starts... MENU The Announcement screen appears automatically.
Weather Band Tuner Control Various control screens appear in the Weather Band Tuner source mode. (with the optional accessory Weather Band Tuner connected only) Displaying the Easy Control Panel The Weather Band Tuner Control Panel is displayed in a floating position of the selected picture. 1 Switches the source. 2 Tunes in a station. • For system key operations, see (page 8). • The Easy Control Panel display is hidden when you touch a central area of the monitor.
Character Entry How To Use the Character Entry screen When you select the Set Disc Name mode or others, the following screen appears for character entry. Character Entry screen 1 1 Shifts the cursor. 2 Enters a space. If you erase a character, locate the cursor on it and touch this button. 3 Enters characters. 1 4 Scrolls up or down the character button display. 2 3 f や -l 5 Exits the Character Entry mode and returns to the previous screen.
Source Select The source you wish to listen to can be selected quickly. Displaying the Control screen • The Source Select screen can be displayed from the control screen of any source Press this key several times unit the Control screen appears. Control screen MENU Direct SRC PBC REP DVD VIDEO Title 1 Chap KENWOOD - 3 - SCRL T 0:05:20 IN TIME AM 12:56 Displaying the Source Select screen 1 Select the source. 2 Returns to the Control screen previously displayed.
Adjusting the Monitor Display Position and Quality You can adjust the position and picture quality of the monitor. Displaying the Screen Control screen 1 Brightness Control You can adjust the picture quality using the following keys. 2 Tint Control Displayed for an NTSC system image on TV or Video. 3 Color Control Displayed on the TV and Video screen only.
Setup Menu Setup Menu You can set up various receiver parameters. Displaying the Control screen • You can call the same Setup Menu for the Control screen of each source. Press this key several times until the Control screen appears. Control screen MENU Direct SRC PBC REP DVD VIDEO Title 1 Chap KENWOOD - - 3 SCRL T 0:05:20 IN TIME AM 12:56 Displaying the Setup Menu screen 1 Scrolls the Setup Menu. 2 Calls each Setup Menu. 3 Calls the Sound Effects Menu.
English | B64-3185-00_(En).indd Sec1:61 61 05.5.
Control during DVD Video, DVD Audio or Video CD Playback Audio Set Up (Other than STANDBY mode) You can set up the car type and speaker system you use together with this unit. Displaying the Car Type Set Up screen If your car type is selected, the Digital Time Alignment and Equalizer is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu.
Before Use Setup Menu Displaying the Channel Level screen You can set the volume at each setup position. e Selects a speaker to be set. (see , page 65) r Sets the speaker volume. (see , page 65) t Starts or stops test signal tone output for setup check. Channel Level screen y Displays the Speaker Set Up screen. MENU Test 13 14 16 Front Right +10 dB 15 14 Channel Level English | B64-3185-00_(En).indd Sec1:63 63 05.5.
Speaker Set Up 2 Select a speaker type You can select a speaker type and its size to get the best sound effects. 1 Select a speaker you wish to adjust You can select any of the following speaker types.
Before Use Setup Menu Channel Level You can set the volume at each setup position. 1 Select a speaker you wish to adjust (Page 63 e) Channel Level setup screen MENU 1 Test 2 3 Front Right +8 dB 5 4 6 Channel Level 1 Center speaker 2 Left front speaker 3 Right front speaker 4 Left rear speaker 5 Right rear speaker 6 Subwoofer 2 Adjust the volume English | B64-3185-00_(En).indd Sec1:65 65 05.5.
Before Use DTA Setup 3 Set a delay time You can manually set the sound output timing of each channel. 1 Display the DTA Setup screen DTA The speakers are virtually moved to the desired distance. When the values of center speaker and front speakers increase, they are virtually moved forward. When the values of rear speakers and subwoofer increase, they are virtually moved backward. (Page 52 5) DTA Setup screen DTA 1 Front 0.50feet 2 2 3 Return 1 Selects a speaker to be adjusted.
Before Use Setup Menu Crossover Network Setup You can manually set a crossover frequency of speakers. X'Over X'Over (Page 62 9) 0dB LPF Subwoofer 100Hz Frequency 1 1kHz 4 80 Hz 1 12dB/Oct 2 Phase Phase Normal Normal Slope 2 3 Return 1 Sets a crossover frequency. 2 Sets a crossover slope. 3 Returns to the Speaker Set Up screen. 4 Sets the phase of subwoofer output (it is displayed when the subwoofer crossover frequency is set). The phase is reversed 180 degrees when set to "Reverse".
Before Use DVD Setup You can set up the DVD play. Displaying the DVD SETUP 1 screen 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu. (page 88) DVD SETUP 3 Calls the Setup Menu. DVD SETUP 1 screen MENU 3 4 Selects a disc menu language.*1 (See , page 70) Menu Language en Set 4 5 Selects a subtitle language.*1 (See , page 70) Set 5 Set 6 6 Selects an audio language.
Before Use Setup Menu Displaying the DVD SETUP 2 screen DVD SETUP 2 screen MENU Parental Level Set 9 Off 10 OFF Angle Mark On 10 Screen Ratio 11 4:3 LB 11 9 Displays the Parental Lock screen.*1 ( OFF) (See , page 71) p Sets an angle mark display. ( On) q Selects the screen display mode.*1 ( 16:9) "16:9": Displays wide pictures. "4:3 (LB)": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen).
Language Setup Selects a language you use for the speech and menus. 1 Display the Language Setup screen See (page 68) and select a language you wish to use. Audio Language Set 2 1 4 3 5 1 Enters a language code. 2 Cancels the language setup and returns to the DVD SETUP 1 screen. 3 Clears the language code. 4 Sets the original audio language. (It appears during audio language setup.) 5 Sets the language and returns to the DVD SETUP 1 screen.
Before Use Setup Menu Parental Level Setup 3 Display the Parental Level Setup screen Sets a parental level. Enter 1 Display the Parental Level code number screen Set Return (Page 69 9) Parental Pass Cancel 2 1 Level 5 1 2 3 4 5 6 7 8 9 1 Level 5 Clear 3 Enter 1 4 0 1 Sets a parental level. 2 Returns to the DVD SETUP 2 screen. 5 1 Enters a code number. 2 Cancels the current setup and returns to the DVD SETUP 2 screen. 3 Clears the code number.
System Setup You can set up the system parameters. Displaying the System 1 screen 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu. (page 88) System Set Up 3 Calls the Setup Menu. System 1 screen MENU 3 4 Turns the key touch tone On or Off. ( Beep 4 On Off 4 2 Scroll Manual 1 5 Remote Sensor 6 On Off 6 On) 5 Allows scrolling of text display on the Source Control screen. ( Auto) "Auto": Scrolls the screen automatically.
Setup Menu Displaying the System 2 screen 8 Sets a music CD playback. ( 1) "1": Automatically recognizes and plays back an MP3/WMA disc, a DVD or a music CD. "2": Forcibly plays back a disc as a music CD. Select "2" if you wish to play a music CD having a special format or if you cannot play a disc in the "1" position. System 2 screen MENU CD Read 1 8 Key illumination color Green 10 System Set Up 2 9 • You cannot play an MP3/WMA/VCD disc in the "2" position.
Control during DVD Video, DVD Audio or Video CD Playback AV Interface You can set audio and visual (AV) interface parameters. Displaying the AV I/F 1 screen 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu. (page 88) AV Interface 3 Calls the Setup Menu. AV I/F 1 screen MENU 3 Navigation 4 RGB 4 VIDEO1 5 2 AV-IN1 Name 1 5 AV-IN2 Interruption 6 On AV-IN2 Name VIDEO2 7 AV I/F 1 6 7 8 4 Selects a navigation system connection.
Before Use Setup Menu Displaying the AV I/F 2 screen AV I/F 2 screen MENU R-CAM Interruption 9 On R-CAM Mirror Normal 10 DVD 11 AV-OUT 11 12 13 AV I/F 2 9 Sets a method to switch to the rear view camera video display. ( Off) "On": Switches to the the rear view camera video display when engaging the shift knob of car to "Reverse". "Off": Switches to the the rear view camera video display when engaging the shift knob of car to "Reverse" and then pressing the [V.SEL] switch several times.
Control during DVD Video, DVD Audio or Video CD Playback User Interface You can set up user interface (IF) parameters. Displaying the User I/F 1 screen 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu. (page 88) User Interface 3 Calls the Setup Menu. User I/F 1 screen MENU 3 4 Switches the wall paper.
Setup Menu w Sets an on-screen display of the TV screen. ( Auto) (when the optional accessory TV tuner in connected only) "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. (page 36) e Displays the User I/F 1 screen. r Displays the User I/F 3 screen. Displaying the User I/F 3 screen t Turns the information display On or Off when a button is touched on the Source Control screen.
Touch Panel Adjustment 3 Adjust the positions You can adjust the touch panel operations. 1 Display the Touch Panel Adjust screen Touch the center of left lower and right upper when requested. Touch If is not shown, touch to display it. Touch Next or Prev. MENU 3 2 Touch Panel Adjust Set 1 4 Touch 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu. (page 88) 3 Calls the Setup Menu. 4 Allows you to start touch panel adjustment.
Setup Menu Clock You can adjust the clock time. 1 Display the Clock screen Clock If is not shown, touch to display it. Clock Next 3 MENU 6 5 2 4 1 or Prev. AM 11:18 5 6 7 Reset RDS Synchronize Off 8 Clock 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu. (page 88) 3 Calls the Setup Menu. 4 Clock time display. 5 Adjusts hours. 6 Adjusts minutes. 7 Sets "00" minute.
Before Use Security Code Setup 2 Start the security code registration You can set a security code to protect your receiver system against theft. Set PassWord Cancel • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note, the Security Code can be set as the 4 digit number of your choice. 1 3 1 1 2 3 4 5 6 7 8 9 Display the Security Code Setup screen 0 2 Security If Clear is not shown, touch to display it.
Before Use Setup Menu If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code 0 — 9 You must enter the same security code as that you have entered in Step 3 above. 2 Enter the security code Enter Now, you can use your Receiver. English | B64-3185-00_(En).indd Sec1:81 81 05.5.
1 Recalls the memorized settings. 2 Memorizes the current Audio Set Up and AV Interface settings. 3 Clears the currently memorized settings. 4 Returns to Set Up Memory screen. Set Up Memory Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored.
Setup Menu SIRIUS Setup You can display the SIRIUS ID. (with the optional accessory SIRIUS Tuner connected only) Displaying the SIRIUS Set Up screen 1 Returns to the Control screen of the previous source. SIRIUS Set Up 2 Calls the Sound Effects Menu. (page 88) 3 Calls the Setup Menu. SIRIUS Set Up screen 4 Displays the SIRIUS ID MENU 3 2 • If Sirius ID SIRIUS Set Up Next 1 123456789012 4 is not shown, touch to display it. Prev. or SIRIUS Set Up English | B64-3185-00_(En).
DAB Set Up You can set the DAB reception. (only with the optional accessory DAB Tuner connected) Displaying the DAB Set Up screen 1 Calls the Sound Effects Menu. (page 88) 2 Returns to the Control screen of the previous source. DAB Set Up 3 Calls the Setup Menu. DAB Set Up screen 4 Turns the DAB Priority On or Off. MENU 3 DAB Priority Off 4 DRC Off 5 Regional INT Off 6 1 2 PTY Watch PTY Watch Off 7 Announcement Select 7 Set 8 5 Turns the Dynamic Range Control function On or Off.
Setup Menu Announcement Selection 2 Set the announcement parameters You can set various announcement reception parameters.
AMP Control Sets the power amp connected via the LX bus. (with the optional accessory LX Power Amp connected only) Displaying the AMP Control screen 1 Calls the Setup Menu. 2 Calls the Sound Effects Menu. (page 88) 3 Returns to the Control screen of the previous source. AMP Control screen 4 Setup option and value display 5 Select a setup option. MENU 1 5 6 Selects a set value. 2 6 6 3 7 Enters the set value. 5 Set 4 AMP 1 VOLT 14.4V AMP Control 86 | 7 • If is not shown, touch Prev.
Setup Menu English | B64-3185-00_(En).indd Sec1:87 87 05.5.
Before Effects Sound Use Menu Sound Effects Menu You can set up the receiver sound effects. Displaying the Control screen • You can display the same Sound Effects Menu on the Control screen of any source. Control screen MENU Direct SRC PBC REP DVD VIDEO Title 1 Chap KENWOOD - - 3 SCRL T 0:05:20 IN TIME AM 12:56 Displaying the Sound Effects Menu screen 1 Calls the Sound Effects Menu. 2 Calls the Setup Menu. (page 60) 3 Returns to the Control screen of the previous source.
Before Use Audio Control You can adjust the front/rear and right/left audio balance. Displaying the Audio Control screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (page 60) Audio Control 3 Calls the Sound Effects Menu. Audio Control screen 4 3 1 4 Adjusts the right and left volume balance. 5 Adjusts the front and rear volume balance. Balance / Fader MENU 6 5 Vol. Offset -5 7 6 2 1 7 6 5 4 5 4 7 Adjusts the subwoofer volume.
Control during DVD Video, DVD Audio or Video CD Playback Equalizer You can set up the equalizer. Displaying the Equalizer screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (page 60) Equalizer 3 Calls the Sound Effects Menu. Equalizer screen MENU 3 4 BMS AMP Bass 5 BMS AMP FREQ 4 Adjusts the bass boost of the B.M.S power amplifier (optional accessory). Flat 6 Normal P-EQ • You may not set some models of power amp boost to "+18".
Sound Effects Menu Parametric Equalizer 5 Set a gain 6 Set a Q value You can Manually set the equalizer curve by adjusting the center frequency, gain and Q value. 1 Display the Parametric Equalizer screen P-EQ Q- Parametric Equalizer Flat 8 7 6 5 Frq Gain Q 80Hz +9dB 1.00 Band1 1 Frq Gain Q 315Hz -7dB 0.25 Band2 2 Frq Gain Q 1.6kHz +9dB 0.50 Band3 Frq Gain Q 3 Return 6 4 7 Rear Return Center Q+ Q- 9 Front Close the Parametric Equalizer screen 5 16kHz -7dB 0.
Surround Control You can set up the sound field. Displaying the Surround Control screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (page 60) Surround Control 3 Calls the Sound Effects Menu. Surround Control screen MENU 3 Stream Information 5 Dolby Digital 2/0 48kHz Adjust 1 2 4 Dolby PL Music 4 Surround Control 6 4 Sets a sound field. You can select any of the following sound fields.
Sound Effects Menu Surround Control Adjustment • You cannot use the during playback of a Multi-channel source. • You cannot use the when the sound field of "Dolby PLII Movie", or "Dolby PLII Matrix" has been set. You can adjust the sound field.
SRS WOW Control You can set up the SRS WOW effect. Displaying the SRS WOW Control screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (page 60) SRS WOW 3 Calls the Sound Effects Menu. SRS WOW Control screen 4 Sets a SRS WOW. You can select any of the following sound fields. • "Off" • "Low" • "Middle" • "High" • "User" MENU 3 5 Adjust 1 Middle 2 4 5 Displays the SRS WOW User Setup screen.
Sound Effects Menu SRS WOW User Setup 1 Display the SRS WOW Adjust screen Adjust SRS WOW Adjust screen SRS WOW Adjust 1 TruBass 3 2 2 FOCUS 5 3 3 SRS 3D 1 4 4 Return 5 1 Selects a speaker to be set (Front, Rear or Center speaker). 2 Sets the TruBass effect level. 3 Sets the FOCUS effect level. 4 Sets the SRS 3D effect level. 5 Returns to SRS WOW Control screen. • FOCUS: Adjusts the vertical position of the speaker and sound image by virtual adjustment.
Position You can adjust the sound effects according to your listening position. Displaying the Position screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (page 60) Position 3 Calls the Sound Effects Menu. Position screen MENU 3 4 Sets a listening position. You can select any of "Front R" (Right front), "Front L" (Left front), "Front All" (All front), and "All" (All) positions. 5 Adjust 5 Displays the Position Fine Control screen.
Sound Effects Menu 1 Center speaker 2 Left front speaker 3 Right front speaker 4 Left rear speaker 5 Right rear speaker 6 Subwoofer Position Fine Control You can fine-adjust your listening position. 1 Display the Position Fine Control screen Adjust 3 Set a delay time 4 Close the Position Fine Control Screen Position Fine Control screen Position Fine Control 1 Total DTA 0.33 feet 2 0.33 feet 2 3 3 Return 4 Return Storing the Preset adjustment setup 1 Selects a speaker to be adjusted.
Sound Effects Menu Zone Control You can set the front and rear audio source. Displaying the Zone Control screen 1 Returns to the Control screen of the previous source. 2 Calls the Setup Menu. (page 60) Zone Control 3 Calls the Sound Effects Menu. Zone Control screen MENU 4 Zone 3 5 5 Rear Vol. 15 5 Adjusts the volume of the rear channel. (This button appears when the Zone function is On.
Glossary DVD: Digital Versatile Disc A type of disc which contains recording of audio/ video packaged media with high video and audio quality, such as a movie, featuring large recording capacity and digital signal processing capability. VCD: VIDEO CD A type of CD which contains the recording of moving images. It compresses image information by about 1/120 and audio information by about 1/6 and accommodates up to 74 minutes of recording in a disc with the same diameter as ordinary music CD of 12 cm.
Troubleshooting Guide Some system functions are limited to control depending on your setup. • Zone cannot be set. • The "Rear Bass Boost" of Surround Control Adjust cannot be set. • The rear speakers of DTA cannot be set. • The "Position Fine Control" of rear speakers cannot be set. • The "Channel Level" of rear speakers cannot be set. • The SRS CS II cannot be set. The rear speakers have been set to "NONE" on the Speaker Set Up screen (page 64). • No Surround Control (Sound Field) can be set.
What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn on. ✔ The fuse has blown. After checking for short circuits in the wires, replace the fuse with one having the same rating. ✔ The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated.
? The sound quality is poor or distorted. ✔ One of the speaker wires is being pinched by a screw in the car. Check the speaker wiring. ✔ The speakers are not wired correctly. Reconnect the speaker wires so that each output terminal is connected to a different speaker. ? Radio reception is poor. ✔ The car antenna is not extended. Pull the antenna out all the way. ✔ The antenna control wire is not connected. Connect the wire correctly, referring to the section on .
Troubleshooting Guide ? The specified disc does not play, but another one plays instead. ✔ The specified CD is quite dirty. Clean the CD. ✔ The CD is upside-down. Load the CD with the labeled side up. ✔ The disc is loaded in a different slot from that specified. Eject the disc magazine and check the number for the specified disc. ✔ The disc is severely scratched. Try another disc instead. ? The sound skips. ✔ Something is touching the disc changer. Remove whatever is touching it.
Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. Hot Error The protection circuit in the unit activates when the temperature inside the unit exceeds 60°C (140°F), stopping all operation. ] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again.
Specifications Specifications subject to change without notice. Monitor Section Picture size : 6.4 inches (diagonal) wide 143.6(W)×77.1(H)mm Display system : Transparent TN LCD panel Drive system : TFT active matrix system Number of pixels : 336,960 (480H×234V×RGB) Effective pixels : 99.
Specifications Audio section Maximum Power (Front&Rear) : 50Wx4 Full Bandwidth Power (Front&Rear)(at Less than 1%THD) : 22Wx4 Preout level (V) : 5V/10kΩ Preout impedance : 80Ω General Operating voltage : 14.4V (11V~16V) Current consumption : 15A Dimensions (W×H×D) 182 × 112 × 163mm 7-3/16×4-7/16×6-7/16 inch Operational temperature range : -10~60 °C Storage temperature range : -20~85 °C Weight 3.0 kg (6.6lbs) Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.
2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J.
B64-3185-00_(En).indd Sec1:108 05.5.