KVT-815DVD KVT-745DVD KVT-715DVD MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL MONITEUR AVEC RÉCEPTEUR DVD MODE D’EMPLOI MONITOR CON RECEPTOR DVD MANUAL DE INSTRUCCIONES © PRINTED IN JAPAN B64-2846-00/00 (K)(AI)
Contents Before Use ..............................................................4 English About discs ............................................................6 Notes on playing MP3/WMA ................................7 Opening/Closing the Monitor and Power Switch ......................................................8 Removing/Attaching the Protection Panel..........9 KVT-815DVD/745DVD/715DVD Basic operations................................................10 Basic Operations of Remote Controller ...
Before Use 2WARNING English To prevent injury and/or fire, take the following precautions: • Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground wires, make sure to use automotive-grade wires or other wires with an area of 0.75mm2 (AWG18) or more to prevent cable deterioration and damage to the cable coating. • To prevent short circuits, never put or leave any metallic objects (e.g.
About discs Notes on playing MP3/WMA Removing discs • Don’t touch the recording surface of the disc. When removing discs from this unit pull them out horizontally. English Handling discs This unit can play MP3 (MPEG1, 2 Audio Layer 3)/WMA. Note, however, that the MP3/WMA recording media and formats acceptable are limited. When writing MP3/WMA, pay attention to the following restrictions. Discs that can’t be used • Discs that aren’t round can’t be used.
Opening/Closing the Monitor and Power Switch English Open the monitor Removing/Attaching the Protection Panel Remove the protection panel [OPEN/CLOSE] key Close the monitor Attach the protection panel Place the right end of the protection panel onto hooks and push it until clicked and locked. Then, push the left end of the panel to lock it. Turn the power switch on Two hooks [SRC] key Hold down the [SRC] key more than one second to turn it off.
KVT-815DVD/745DVD/715DVD Basic operations 1 Play Disc [Disc insertion slot] ■ When the monitor is open English A disc is played when you insert it. 2 Stop to Play [7] key Stops to play. 3 Play/Pause [38] key Pauses and replays a disc. 4 Eject Disc [EJECT] key The disc is ejected. 5 Switch Video Sources [V.SEL] key The video sources are switched each time you press the key. 7 Volume Controls [+]/[–] key 8 Track/Station Selectors [4]/[¢] key Selects a music or chapter, track, or frequency.
Basic Operations of Remote Controller 6 Joystick [DVD] t [DISC] Select a folder or a disc. English Enters your selection from the DVD Disc Menu. 7 [DVD] [VCD] [TV] FM: Switches to TV1, TV2 or VIDEO. Returns to the previous screen when the DVD/VCD Disc Menu is used. [TUNER] FM: Switches to the FM1, FM2, or FM3 band. AM: Switches to the AM band. 8 [DVD] Calls the Top menu of DVD Disc Menu. 9 Switch Video Sources [V.
Switch Small Display (Function of KVT-815DVD) Switch Screen Mode The Small Display screen mode changes each time the [DISP] key is pressed. The Screen mode of the monitor changes each time the [MODE] key is pressed. English [DISP] key Full picture mode [FULL] Justify picture mode [JUST] Cinema picture mode [CINEMA] Zoom picture mode [ZOOM] Normal picture mode [NORMAL] * Hold down the [DISP] key more than 1 second to switch to the Frequency display.
Control during DVD Video or Video CD Playback Control during DVD Video or Video CD Playback English Various control screens appear when you play back a DVD Video (DVD) or a Video Displaying the DVD/VCD Playback screen Displaying the Easy Control Panel 1 Title Number Display You can use the following operations when displaying DVD/VCD images. 2 Chapter Number Display Plays back the DVD or VCD.
Control during DVD Video or Video CD Playback English Displaying the DVD/ VCD Control screen o Adjusts the volume. Plays a DVD/VCD using various functions. ; Ejects the disc from the built-in disc player. a Calls the Sound Effects Menu. (see page 80) s Switches the source. Displays the Source Select screen when touched more than one second. (see page 57) DVD/VCD Control screen 19 19 DVD V I DEO 21 Audio 23 Set Up 22 SRC 19 28 25 1 3 : 5 0 28 d Calls the Setup Menu.
Control during DVD Video or Video CD Playback DVD Disc Menu 2 Select Disc Menu options English Selects an option from the DVD Disc Menu. Disc Menu VCD Zoom Control Direct Search Displays an enlarged VCD screen. You can search for a DVD/VCD chapter, scene or track by entering its number.
Tuner Control Tuner Control English Various control screens appear in the Tuner Source mode. Displaying the Easy Control Panel Displaying the Tuner Control screen The Tuner Control Panel is displayed in a floating position of the selected picture. 1 Adjusts the volume. 6 Adjusts the volume. You can tune in a station using various functions. 7 Calls the Tuner Menu. 2 Switches the source. 8 Calls the Sound Effects Menu. (see page 80) 3 Switches the band (to AM or FM1/2/3). 9 Switches the source.
Tuner Control English Seek Mode Manual Memory Preset Select Set Station Name Sets a station selection. Stores the current receiving station in memory. Lists and tunes in stations in memory one after the other. Names a station. 1 Select a station you wish to store in memory SEEK AM FM If is not shown, touch SEEK 1 Tune in a station you wish to name 1 Call the Tuner Menu Next FM . AM Menu The mode is switched each time you touch the button.
Tuner Control English Direct Search Traffic Information Search for Program Type Radio Text Tunes in a station when its frequency is entered. When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. A program is tuned when you set its program type. You can display the radio text. 1 Select a band 1 1 Call the Tuner Menu Call the Tuner Menu When the traffic bulletin starts... Menu The Traffic Information screen appears automatically.
CD/MP3/WMA/Disc Changer Play Control CD/MP3/WMA/Disc Changer Play Control English You can call various control screens during CD/MP3/WMA/Disc Changer playback. Displaying the Easy Control Panel Displaying the CD/MP3/WMA/ Disc Changer Control screen 1 Adjusts the volume. The CD/MP3/WMA/Disc Changer Play Control Panel is displayed in a floating position of the selected picture. 2 Switches the source. p Calls the CD Menu. 4 When a CD is played back on the built-in disc player: Rewinds or fast forwards.
CD/MP3/WMA/Disc Changer Play Control English MP3/WMA Control screen Disc Changer/ CD player Control screen During MP3/WMA play DVD 29 MP3/WMA Menu Audio 35 – 33 Set Up 34 + 36 37 REP FREP 42 46 CD- CH Set Up z Fast Forwards. IN 45 x Stops to play. When pressed twice, the disc is played back from its beginning in the next time. Menu Audio / Ejects a disc.
CD/MP3/WMA/Disc Changer Play Control Set Disc Name English Names a CD. 1 Play a CD you wish to name Displaying the CD/MP3/WMA/ Disc Changer Menu screen You can select menu options using various functions. 2 Call the CD/Disc Changer Menu The directory of an MP3/WMA disc are listed for quick search. 1 Call the MP3/WMA Menu Selects options from various function menus. Returns to the CD/MP3/WMA/Disc Changer Control screen.
CD/MP3/WMA/Disc Changer Play Control Mute Telephone English ID3/WMA TAG Display (during MP3/WMA play) Disc Select (during play by disc changer) The ID3/WMA TAG information of MP3/WMA file is listed. The discs loaded on the disc changer are listed for quick disc selection. 1 Call the MP3/WMA Menu 1 Calls the Disc Changer Menu Menu Direct Search Mute Telephone Searches for a disc or a song when its number is entered. When the telephone is called, the system is paused automatically.
TV Control TV Control (with the optional accessory TV Tuner connected only) English Various control screens appear in the TV Source mode. Displaying the TV Picture screen Displaying the TV Control screen 1 TV Band Number Display Various control screens appear in the TV Source mode. Selects the TV Pictures. TV Picture screen 1 TV 1 5 6 t Calls the TV Menu. 3 Channel Number Display y Calls the Sound Effects Menu. (see page 80) 4 Channel Up Area Increase the channel. u Switches the source.
TV Control English Seek Mode Manual Memory Set Station Name Direct Search Sets a TV station selection. Stores the current receiving channel in memory. Names a station. Tunes in a station when its channel number is entered. SEEK 1 Select a station you wish to name 1 Select a channel you wish to store in memory 1 Selects the Direct Search mode TV If is not shown, touch SEEK TV . Next The mode is switched each time you touch the button.
SIRIUS Tuner Control SIRIUS Tuner Control (with the optional accessory SIRIUS Tuner connected only) English Various control screens appear in the SIRIUS Tuner source mode. Displaying the Easy Control Panel Displaying the SIRIUS Tuner Control screen The SIRIUS Tuner Control Panel is displayed in a floating position of the selected picture. 6 Adjusts the volume. 1 Adjusts the volume. 7 Calls the SIRIUS Tuner Menu. 2 Switches the source. 8 Calls the Sound Effects Menu.
SIRIUS Tuner Control Channel Search 3 Select a category English The categories and channels are listed for your channel selection. etc. C AT. Po p Direct Channel Search Information Display A channel is tuned when you enter its number. The tuned program information is displayed. 1 Call the SIRIUS Tuner Menu 1 Call the SIRIUS Tuner Menu Menu Menu 1 Call the SIRIUS Tuner Menu The channel list of the selected category appears.
HD Radio Control HD Radio Control (with the optional accessory HD Radio tuner connected only) English Various control screens appear in the HD Radio Source mode. Displaying the Easy Control Panel Displaying the HD Radio Control screen 1 Adjusts the volume. The HD Radio Control Panel is displayed in a floating position of the selected picture. 6 Adjusts the volume. You can tune in a station using various functions. 7 Calls the HD Radio Menu. 2 Switches the source.
HD Radio Control English Seek Mode Manual Memory Receive Mode Title Display Sets a station selection. Stores the current receiving station in memory. The digital or analog program is selected and received. An information about the received song is displayed. 1 Select a station you wish to store in memory SEEK 1 Call the HD Radio Menu HD FM If SEEK is not shown, touch Next . The mode is switched each time you touch the button.
DAB Tuner control DAB Tuner control (with the optional accessory DAB tuner connected only) English Various control screens appear in the DAB Tuner source mode. Displaying the Easy Control Panel 1 Adjusts the volume. The DAB Tuner Control Panel is displayed in a floating position of the selected picture. 2 Switches the source. Displaying the DAB Tuner Control screen 7 Adjusts the volume. You can select the Ensemble and services using various functions. 9 Calls the Sound Effects Menu.
DAB Tuner control English Seek Mode Service Preset Memory Service Select Language Filter A service selection method can be set. The current receiving service is stored in memory. The service list of the currently receiving ensemble is displayed for your selection. The languages are list for your selection. SEEK If SEEK 1 Select a service you wish to store in memory is not shown, touch Next Menu Band . Se r v i c e The mode display is switched each time you touch the button.
DAB Tuner control Search for Program Type Select a Language English The services are received when you set its program type. Display the Language select screen DAB Information DAB Announcement The DAB information is displayed. When the Announcement you have turned on starts, any source is switched to the Announcement automatically. 1 Call the DAB Tuner Menu 1 Call the DAB Tuner Menu LANG When the announcement starts... Menu The Announcement screen appears automatically.
Weather Band Tuner Control Weather Band Tuner Control (with the optional accessory Weather Band Tuner connected only) English Various control screens appear in the Weather Band Tuner source mode. Displaying the Easy Control Panel 1 Adjusts the volume. The Weather Band Tuner Control Panel is displayed in a floating position of the selected picture. Display of Easy Control Panel 1 MODE: F U L L Displaying the Weather Band Tuner Control screen 4 Adjusts the volume. 2 Switches the source.
Character Entry Source Select English How To Use the Character Entry screen Source Select The source you wish to listen to can be selected quickly. When you select the Set Disc Name mode or others, the following screen appears for character entry. Displaying the Control screen Character Entry screen 1 1 KENWOOD 3 4 4 2 a b c d e f g h i j k l m n o p q r s t u v w x y z Space Press this key several times unit the Control screen appears.
Adjusting the Monitor Display Position and Quality Setup Menu English Adjusting the Monitor Display Position and Quality Setup Menu You can adjust the position and picture quality of the monitor. You can set up various receiver parameters. Displaying the Screen Control screen Displaying the Control screen You can adjust the picture quality using the following keys. 1 Brightness Control Disabled if the Auto Dimmer is On. 2 Tint Control Displayed for an NTSC system image on TV or Video.
Setup Menu English Audio Set Up Crossover Network Setup You can setup a speaker network, etc. You can set a crossover frequency of speakers. X ' Ov e r Displaying the Audio Set Up screen Au d i o S e t 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Up 3 Calls the Sound Effects Menu. (see page 80) 4 Calls the Setup Menu. Speaker setup screen 1 1 4 3 Audio Menu 5 6 Sets up the front speaker type to fine-tune for the optimal equalizer curves.
Setup Menu DVD Setup English You can set up the DVD play. Displaying the DVD SETUP 1 screen Displaying the DVD SETUP 2 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. DVD SETUP 3 Calls the Sound Effects Menu. (see page 80) 4 Calls the Setup Menu.
Setup Menu Language Setup Abbreviation English Select a language you use for the speech and menus. 1 Display the Language Setup screen See (see page 62) and select a language you wish to use. Audio LANG en d 1 a 3 b c e f g h i j k l m n o p q r s t u v w x y z C l e ar 2 Can c e l ORIGN 4 5 Enter 1 Enters a language code. 2 Cancels the language setup and returns to the DVD SETUP 1 screen. 3 Clears the language code.
Setup Menu System Setup English You can set up the system parameters. Displaying the System Set Up 1 screen Displaying the System Set Up 2 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. S y s t em S e t U p 3 Calls the Sound Effects Menu. (see page 80) 4 Calls the Setup Menu.
Setup Menu AV Interface English You can set audio and visual (AV) interface parameters. Displaying the AV I/F 1 screen Displaying the AV I/F 2 screen 1 Adjusts the volume. AV I / F Set 9 Selects an AV source to be output at the AV OUTPUT port. ( AV-IN) 2 Returns to the Control screen of the previous source. Up 3 Calls the Sound Effects Menu.
Setup Menu User Interface English You can set up user interface (IF) parameters. Displaying the User I/F 1 screen User I / F Set Displaying the User I/F 2 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Up 3 Calls the Sound Effects Menu. (see page 80) 4 Calls the Setup Menu. User I/F 1 screen 1 1 4 3 Audio Set Up 2 SRC User I/F 2 screen Menu Audio Wa l l P a p e r 5 If U s e r touch 5 Stripes 8 Sets an on-screen display of the video playback screen.
Setup Menu Touch Panel Adjust 3 Adjustment English You can adjust the touch panel operations. Adjusts the clock time. 1 Display the Touch Panel Adjust screen 1 Display the Clock Screen Touch the center of left lower and right upper when requested. To u c h A d j u s t If is not shown, touch To u c h A d j u s t or Clock C l o ck A d j u s t If C l o ck A d j u s t to display it.
Setup Menu Security Code Setup 2 Start the security code registration English You can set a security code to protect your receiver system against theft. If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code Set When the Security Code function is activated, the code can't be changed and the function can't be released. Note, the Security Code can be set as the 4 digit number of your choice.
Setup Menu English of KVT-815DVD> AMP Control SIRIUS Setup
Setup Menu English DAB Set Up (with the optional accessory DAB tuner connected only) Announcement Selection The DAB reception can be set. Various announcement reception parameters can be set. Displaying the DAB Set Up screen 1 Displays the Announcement Selection screen 1 Adjusts the volume. Set 2 Calls the Sound Effects Menu. (see page 80) DA B S e t U p 3 Returns to the Control screen of the previous source. 1 1 DAB P r i o r i t y 4 Menu DRC Set Up 3 SRC 8 Reg i o n a l I n t .
Sound Effects Menu English Sound Effects Menu Audio Control You can set up the receiver sound effects. You can adjust the front and rear and right and left audio balance. Displaying the Control screen Displaying the Audio Control 1 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Au d i o Co n t r o l Control screen 3 Calls the Setup Menu.
Sound Effects Menu English Equalizer Tone curve setup You can set up the equalizer. You can set a Tone curve. 3 Set a center frequency FREQ 1 Display the Tone setup screen Displaying the Equalizer screen 2 Returns to the Control screen of the previous source. Equa l i z e r 3 Calls the Setup Menu. (see page 59) 1 1 4 Audio 2 SRC 7 Menu 3 Set Up 5 To n e System Q Natural S y s t em Q - E x 5 Off 6 Equa l i z e r 1 Level Tone setup screen 1 1 5 Selects an equalizer curve type.
Sound Effects Menu Glossary DVD: Digital Versatile Disc Zone Control English A type of disc which contains recording of audio/video packaged media with high video and audio quality, such as a movie, featuring large recording capacity and digital signal processing capability. You can set the front and rear audio source. Displaying the Zone Control screen VCD: VIDEO CD 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Zone C on t r o l 3 Calls the Setup Menu.
Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. English • Attenuator is turned on. • The fader or balance settings are set all the way to one side. • The input/output wires or wiring harness are connected incorrectly. ■ General The power does not turn on. • The fuse has blown.
Troubleshooting Guide The viewing angle cannot be changed. English • The DVD disc being played does not contain the recording of more than one angle. • You are attempting to switch the angle in a DVD section where more than one angle is not recorded. ■ MP3/WMA source • The viewing angle cannot be changed when the DVD disc being played does not contain the recording of more than one angle. • More than one viewing angle may be recorded only in limited sections in a disc.
Specifications 2CAUTION Specifications subject to change without notice. English Monitor Section Picture size..............................6.95 inches (diagonal) wide 154.1(W)×87.1(H)mm Display system ........................Transparent TN LCD panel Drive system ..............................TFT active matrix system Number of pixels....................336,960 (480H×234V×RGB) Effective pixels ......................................................99.99% Pixel arrangement......................