WIRELESS UNIT RFU-6100 INSTRUCTION MANUAL KENWOOD CORPORATION B60-5492-08 00 C (K) KW 0402 RFU-6100 5492/01-08/EN
Before applying power Caution: Read this page carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ............................................ AC 120V only Safety precautions WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
IMPORTANT SAFEGUARDS Caution: Read this page carefully to ensure safe operation. Please read all of the safety and operating instructions before operating this appliance. Adhere to all warnings on the appliance and in the instruction manual. Follow all the safety and operating instructions. These safety and operating instructions should be retained for future reference. 1.
Caution: Read this page carefully to ensure safe operation. 13. Lightning – For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges. 14. Abnormal smell – If an abnormal smell or smoke is detected, immediately turn the power OFF and unplug the appliance from the wall outlet.
Operation 1 Connect your Surround Speaker with the corresponding color terminals on the Wireless Receiver (RFU-R6100). (Right: Gray, Left: Blue) Surround Speaker (R) Surround Speaker (L) Wireless Receiver (RFU-R6100) 2 Connect the Wireless Receiver (RFU-R6100) power cord to your power supply. • The Wireless Receiver (RFU-R6100) power indicator lights up green. 3 Connect the AC adapter to the Wireless Transmitter (RFU-T6100) and power supply. Use the enclosed AC adaptor (AC-150015A) for this product.
Notes: • After you switch off your Receiver, the Wireless Transmitter (RFU-T6100) automatically enters standby mode. On receiving an incoming audio signal from your Receiver again, the Wireless Transmitter (RFU-T6100) automatically operate. • When the Wireless Receiver (RFU-R6100) enters the standby mode, the power indicator lights up red. • Do not position the Wireless Receiver (RFU-R6100) and Wireless Transmitter (RFU-T6100) near metal (such as heat ducts). Metal can absorb RF signals.
For the U.S.A. FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Specifications Wireless Receiver (RFU-R6100) Wireless Transmitter (RFU-T6100) Output power (1 kHz,10% T.H.D. at 8Ω one channel driven) .................................................................. 50 W + 50 W Power consumption .................................................... 25 W Power supply rating .................................... AC 120V, 60 Hz Dimensions ................................. Width: 195 mm (7-11/16 ") Height: 53 mm (2-1/16 ") Depth: 196 mm (7-11/16 ") Net Weight ...............