Box contents Safety precautions Unpack your KPA-H2H kit carefully and make sure that everything listed here is present: 1 x Cradle 1 x Base Caution 1 x Antenna Take the following precautions to keep the unit in proper working order: • Installation must be performed according to this installation manual. Kenwood is not responsible for issues arising from installations not performed according to the procedures in this manual. • Use only the included power supply.
Installation in a home Installation in a home (continued) Note: Do not put Here2Anywhere in the docking station until you have completed the installation. 1. Using the provided screw, assemble the docking station cradle to the base. 4 2A. Plug the audio cable’s mini 2B. Plug the audio cable’s white connector into the back of the (L ch,) and red (R ch.) connecdocking station, as shown. tors into your audio system. KPA-H2H Installation Guide 3.
Installation in a home: Placing the antenna 5. For best reception of the satellite signal, place the included antenna near a window. Use the map on page 7 as a general placement guideline—some experimentation may be needed to obtain the best results. Due to the paths of the SIRIUS satellites over the US, the best window for the antenna in your home depends on where you live. Locate the antenna based on which section of the country you live in according to the map on page 7.