User Manual

15
EN
ENGLISH
Timer setting
The system can switch on to CD, TUNER or TAPE
mode automatically at a preset time, serving as
an alarm to wake you up.
The timer recording of radio programs onto a cas-
sette tape is also possible.
Important!
Before setting the timer, ensure that the clock
is set correctly.
When setting the timer (playback or record-
ing) for TUNER, be sure to select the station
you wish to tune in beforehand.
1 Turn the system on.
2 Press timer set button (TIMER SET button on
the remote control) twice to enter timer set-
ting mode.
The icon “TIMER ON” will start flashing on the
display.
3 Press program button (PROGRAM button on
the remote control).
The hour indication will start flashing.
4 Set the time to start playback.
Press 4 or ¢ button (4 or ¢ SEARCH/
SKIP/TUNING button on the remote control)
to set timer start hours and press program
button (PROGRAM button on the remote con-
trol) to store the setting.
Repeat the same procedure to set the minutes.
5 Press timer set button (TIMER SET button
on the remote control).
The icon “TIMER OFF” will start flashing.
6 Repeat the step 3 and 4 to set the time to
stop the timer (off time).
7 Press timer set button (TIMER SET button on
the remote control).
The icon “TIMER” will flash and the source
display will appear.
8 Press program button (PROGRAM button on
the remote control).
9 Press 4 or ¢ button (4 or ¢ SEARCH/
SKIP/TUNING button on the remote control)
to select the desired source and press pro-
gram button (PROGRAM button on the remote
control) to store the setting.
The source switches as follows :
“CD” → “TUNER” → “TAPE” → “REC TU”
(recording tuner)
0 Press timer set button (TIMER SET button
on the remote control).
The icon “TIMER” will flash and the volume
display will appear.
! Press program button (PROGRAM button on
the remote control).
@ Press 4 or ¢ button (4 or ¢ SEARCH/
SKIP/TUNING button on the remote control)
to set volume level and press program button
(PROGRAM button on the remote control) to
store the setting.
# Press timer set button (TIMER SET button
on the remote control).
$ Press timer on/off button (TIMER ON/OFF
button on the remote control) to activate timer
mode.
The icon “TIMER” changes from flashing to
steadily lit.
The timer is now set.
% Switch the system to standby mode.
When reached the preset timer, the selected
source will play or switch to standby mode if
the timer has been activated.
Clock/timer operation