HM-337 COMPACT Hi-Fi COMPONENT SYSTEM INSTRUCTION MANUAL KENWOOD CORPORATION B60-5467-18 01 5467/01-07/E N C (E, M, X) 0312
Before applying power Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. Australia ....................................... AC 240 V only Europe .......................................... AC 230 V only Other countries ......... AC 110 - 120 / 220 - 240 V switchable* Except for the Europe and Australia * AC voltage selection The AC voltage selector switches on the bottom are set to the voltage that prevails in the area to which the unit is shipped.
Before applying power Unpacking Contents Unpack the unit carefully and make sure that all accessories are present. Caution : Read the pages marked to ensure safe operation. Antenna terminal cover ............................... (1) Screw for antenna terminal cover ............... (1) AM loop antenna ......................................... (1) Remote control unit .................................... (1) Batteries(R03/AAA) ..................................... (2) AC plug adapter* .....................
Before applying power Preparing the remote control Connections Insert batteries type R03/LR03 (“AAA” size) into the remote control. Connecting the AM antenna Set up the AM loop antenna, and then connect it. Operation When the standby indicator is lit, the power turns ON when you press the POWER button on the remote control. When the power comes on, press the button you want to operate.
Names and functions of parts Remote control unit 4 POWER 1 2 3 CD TAPE TUNER/BAND PLAY/PAUSE STOP REC /DEMO – SEARCH/TUNING + 5 PROGRAM 9 – P.CALL + 0 4 PTY RDS DISPLAY RANDOM SLEEP INTRO ON/OFF EQ/X-BASS 5 STEREO/MONO 6 7 7 ! @ # SET TIMER 8 $ MUTE 8 6 REPEAT – VOLUME + % 9 0 1 POWER button To turn the system on or to standby mode. 2 Input selector buttons CD button to select CD input or turn the system on to CD input.
Names and functions of parts Main unit 1 7 PROGRAM icon RANDOM icon TIMER icons REPEAT mode icon REC icon INTRO icon SLEEP CD time display icon icons 2 RDS icon (the Europe only) 3 4 5 6 TIMER ON OFF TOTAL REMAIN INTRO SLEEP REC. PROGRAM RANDOM REPEAT ALL ONE RDS SYNC STEREO POP CLASSIC ROCK JAZZ X-BASS 8 STEREO icon Sound effect icons Frequency display Preset channel display Playback time display etc.
Names and functions of parts 1 CD compartment 2 phones jack 3 EQ/X-bass button To select the desired sound effect: POP, CLASSIC, ROCK, JAZZ or FLAT; to switch on/ off X-BASS mode. 4 repeat button To repeat one track or all tracks for CD. 5 program button To program disc tracks for CD; to program preset radio stations for TUNER. To set or reset clock for clock. To set or reset timer for timer. 6 p.call +/– buttons To select a preset radio stations for TUNER. 7 push open button To open the CD compartment.
Basic function Demonstration mode To switch off the volume temporarily The system is equipped with a demonstration function (only display). The demonstration consists of sequential change of display and indicators showing the operations, but the audio itself does not change. The demonstration function can be cancelled as follows. Press MUTE button on the remote control. To deactivate the demonstration • Press and hold rec button (REC/DEMO button on the remote control) for more than 0.
Using the CD Loading a disc 1 Press CD button to select CD mode. 2 Press push open button to open the CD door. 3 Place a CD into the tray with the label facing up. 4 Close the CD door. The total playtime and total number of tracks will appear in the display. 5 To remove the CD, press push open button, grasp the CD by its edges, and carefully pull it out. Notes: • • To ensure good system performance; wait until the unit completely reads the disc before proceeding.
Using the CD If you press repeat button on the unit (REPEAT button on the remote control) during programmed playback, the current track or all programmed tracks will be played repeatedly. The icon "REPEAT ONE" or "REPEAT ALL" and the icon "PROGRAM" will appear on the display. 6 Press 7 STOP button once to stop program playback or twice to clear the program. The icon "PROGRAM" will disappear from the display. Repeat You can play the current track or the whole disc repeatedly.
Using the radio Tuning in radio stations 1 Press TUNER/band button (TUNER/BAND button on the remote control) to select TUNER mode. The current radio frequency will be displayed. 2 Press TUNER/band button (TUNER/BAND button on the remote control) to select the desired waveband: FM or AM. 3 Press and hold 4 or ¢ button (4 or ¢ SEARCH/TUNING button on the remote control). Repeat this procedure until the desired station is reached.
Using the radio Radio Text function: Displays the radio text data transmitted by some RDS stations when you press the RDS DISPLAY button. There is “NO TEXT” display if no text data is transmitted. • The icon “R·D·S” appears on the display when an RDS broadcast (signal) is received. Note: Some functions and function names may differ certain countries and areas.
Using the cassette Playing a cassette tape 1 Press TAPE button to TAPE. 2 Press push open button to open the cassette compartment door. Radio recording tip • To temporarily pause the recording, press rec button (REC/DEMO button on the remote control). Press 6 PLAY/PAUSE button to resume recording. Recording from a CD 3 Insert cassette tape into the compartment with the open edge facing down and the full reel on the left. 1 Insert a blank cassette tape into the tape deck. 4 Close the door securely.
Clock/timer operation View clock Timer setting The clock (if it is set) will be shown in standby mode. To view the clock in any source mode (CD, TUNER or TAPE), press timer set button (TIMER SET button on the remote control). The clock will be displayed. If the clock has not been set, "0:00" will start flashing. The system can switch on to CD, TUNER or TAPE mode automatically at a preset time, serving as an alarm to wake you up. The timer recording of radio programs onto a cassette tape is also possible.
Clock/timer Operation 8 Press 4 or ¢ button (4 or ¢ SEARCH/ TUNING button on the remote control) to select the desired source and press program button (PROGRAM button on the remote control) to store the setting. The source switches as follows : “CD” → “TUNER” → “TAPE” → “REC TU” (recording tuner) To activate / deactivate the timer • Press timer on/off button (TIMER ON/OFF button on the remote control). If activated, the icon “TIMER” will appear on the display.
General information Maintenance Caution on condensation Cleaning the cabinet Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside. This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours and restart the operation after the condensation has dried up.
In case of difficulty Resetting the Microcomputer The microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the microcomputer and return the unit to its normal operating condition. Plug in the AC power cord to the wall outlet, and within 5 seconds, press and hold down the 7 button and press CD button.
Specifications Main unit Amplifier section Rate output power .......5 W + 5 W (1 kHz, 10% T.H.D., at 4 Ω) X-BASS ...................................... +7 dB (60 Hz) Tuner section FM tuner section Tuning frequency range ................................. 87.5 MHz ~ 108 MHz AM tuner section Tuning frequency range (For the Europe and Australia) ................................. 531 kHz ~ 1,602 kHz (For other countries) ..................................530 kHz ~ 1,610 kHz CD player section Laser ............
EN 5467/08-20/E N
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
