Operation Manual

37
Application section
Various CD/MD playback features
Let the “PGM” indicator light.
Select track numbers in the order you want to play them.
Start playback.
Select the CD or MD input.
÷ Track No. 100 or more can be selected only with MD.
÷ Up to 32 tracks can be programmed. When "PGM FULL"
is displayed, no more tracks can be programmed.
÷ If you made a mistake, press the CLEAR/DELETE key
and enter the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
÷ When the total time of CD program is 256 minutes or
more or when that of MD program is 1000 minutes or
more, the display shows "
- -
:
- -
" .
1 Select the track.
2 Confirm the selection.
Selection of tracks
or
(Go to step 2 within 20 seconds.)
Press the numeric keys as shown below....
To select track No. 23 : +10
X 2, 3
To select track No. 40 : +10
X 4, 0
To select track No. 102 : +10
X 10, 2
Various CD/MD playback features
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
1
2
3
PGM CD
PGM CD
Program position of the track
to be selected next.
(To select more than one track, repeat steps 1 and
2 for each track.)
÷ Tracks will be played in the order they were pro-
grammed (following the program numbers).
÷ When the 4/ ¢ key is pressed during play, the pro-
gram will jump to the preceding or the following track
respectively.
÷ When the 4 key is pressed once during playback, the
play position returns to the beginning of the current
track being played.
PGM
SET
6
CD
6
MD
Press in stop mode
Listening to the desired sequence (program playback)
Lights
5
JKL
2
ABC
8
TUV
0
QZ
6
MNO
3
DEF
9
WXY
4
GHI
1
7
PRS
10
&
( )
-