Operation Manual

Application section

Convenient recording methods

Check the current play mode of the CD player.

Select the desired CD track and play it.If it is in play mode, stop it.

All-track recording Single-track recording

÷ When step 4 is performed in the middle of CD play-

back, the current track will be recorded from the begin-

ning.

To interrupt a recording

(Recording and playback will be stopped)

At the end of the recording

MD recorder : Stop.

Cassette deck : Stop is executed after an unre-

corded portion of about 4 sec.

has been produced.

stop

Tuning

Mode

stop

Tuning

Mode

(To record other tracks, repeat steps 3 and 4 for each

track)

Do not turn power off or apply shock or impact

while "MD WRITING" is displayed. If the power cord

is unplugged before "MD WRITING" disappears, the

recorded or edited data will be lost.

Start recording.

If you are operating the main unit, the same effect as

step 4 can be obtained by selecting "REC OPTIONS"

then selecting "CD = MD" or "CD = TAPE".

÷ When either the playback of CD or recording of MD or

tape is stopped, the other operation is stopped auto-

matically.

MD O.T.E.

TAPE O.T.E.