Operation Manual

Application section

Convenient recording methods

Check the current play mode of the CD player.

Select the desired CD track and play it.If it is in play mode, stop it.

All-track twin recording Single-track twin recording

÷ When step 4 is performed in the middle of CD play-

back, the current track will be recorded from the begin-

ning.

Start recording.

1 Press the menu key.

2 Turn the volume/multi control knob to se-

lect "REC OPTIONS", then press the set/

demo key.

3 Turn the volume/multi control knob to se-

lect "TWIN REC", then press the set/demo

key to start twin recording.

(To record other tracks, repeat steps 3 and 4 for each

track)

This operation is not available from the remote.

÷ When either the playback of CD or recording of MD or

tape is stopped, the other operation is stopped auto-

matically.

To interrupt a recording

(Recording and playback will be stopped)

stop

Tuning

Mode

stop

Tuning

Mode

Turning the knob switches the display contents.

1 "CD = MD"

2 "CD = TAPE"

3 "TWIN REC" :

Select to record a CD onto both

MD and tape.

At the end of the recording

MD recorder : Stop.

Cassette deck : Stop is executed after an unre-

corded portion of about 4 sec.

has been produced.

Do not turn power off or apply shock or impact

while "MD WRITING" is displayed. If the power cord

is unplugged before "MD WRITING" disappears, the

recorded or edited data will be lost.