Operation Manual

63
Application section
MD Edit Functions
Input the title.
2
1 Press the CHARAC. key repeatedly to select
a character group.
2 Select the first character by pressing a char-
acter input key.
3 Press the SET key to set the character.
To enter a character using the character input keys (Character input key mode)
If "Aa" or "12" is not displayed, press any char-
acter input key.
Pressing a key more than once changes the
character input with it.
Example: When the ABC key is pressed
Each press changes the character which can be
input.
A=B=C=a=b=c
±
÷ Press the 1 or ¡ key to move the input location
(cursor) to the left or right.
÷ If you commit a mistake, press the CLEAR/DELETE
key to clear the character.
(Repeat steps 1 to 3 for each character to be
entered.)
The character group which can be used in the "char-
acter input key mode" are as follows.
"Aa" group :
A to z, symbols plug title memos ([1], [2], [3])
"12" group :
0 to 9 and symbols.
1
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO
7 PRS
8 TUV
9 WXY
0 QZ
+10 &( ) -
SPACE
Key
Group
Title editing character list
"12"
"Aa"
÷ The first alphabet which appears when a character input key is pressed may sometimes be an uppercase or sometimes
a lowercase letter depending on each occasion.
BA ≤Aa
The cursor moves and waits for input of the
next character.
space [1] [2] [3]
ABCabc
DEFdef
GHIghi
JKLjkl
MNOmno
PRSprs
TUVtuv
WXYwxy
QZqz
' , : ? ! ; . ” _ ` $ ^ & ( )
- / +
*
= + < > # % @
space
CHARAC.
1
2
3
4
5
6
7
8
9
0
SET
Continued on next page
Characters can be selected either in the "character input key mode" or "skip key mode".