Operation Manual
65
Application section
MD Edit Functions
TITLE STORE
Executing title input
3
÷ When the ENTER key is pressed , the selection of the
next title (disc title or track title) to be edited can be
restarted. To continue editing of another title, repeat
the above procedure from step 1-2.
1 Press the ENTER key to set the title input.
2 Press the TITLE INPUT key to exit from
editing.
3 Press the 0 MD key and eject the MD.
÷ If power is switched off (to STANDBY mode) or
the TITLE INPUT key is pressed to cancel set-
ting before the ENTER key is pressed here, the
inputs made until then will be cleared.
Erasing all titles
1 Select the MD input and press the TITLE IN-
PUT key.
2 Press the 4 or ¢ key repeatedly to select
"ALL ERASE".
3 Press the SET key to set the "ALL ERASE"
selection.
4 Press the ENTER key to erase all titles.
5 Press the TITLE INPUT key to exit from
editing.
6 Press the 0 MD key and eject the MD.
÷ All of the disc and track titles are erased.
Changing or deleting a title
1 Perform step 1 in "Assigning a title to a disc
or track" to select the disc title or track title
to be changed or erased.
2 Press the 1 or ¡ key to place the cursor
on the character to be modified or erased.
3 Press the CLEAR/DELETE key to delete the
character. (If you are erasing the title, go to
step 5.)
4 If you are changing the title, perform step 2
in "Assigning a title to a disc or track".
5 Perform step 3 in "Assigning a title to a disc
or track".
÷ If it is required to insert a character, place the
cursor on the character immediately before the
desired insertion location.
TITLE INPUT
ENTER
0
MD
The MD editing is established finally at the mo-
ment the MD disc is ejected. To cancel the edit-
ing contents, perform the operation described in
"To delete the edited contents (EDIT CANCEL)"
before ejecting the disc. ˆ
Information is
being written.
Mini Disc has
been ejected.
MD WRITING
EJECT
Do not turn power off or apply shock or impact while
"MD WRITING" is displayed. If the power cord is un-
plugged before "MD WRITING" disappears, the re-
corded or edited data will be lost.