Operation Manual

Timer operation

Application section

Reserve the timer operation.

÷ Press the remote's TIMER key repeatedly until "O.T.T."

lights up.

÷ To cancel the timer reservation after it has been activated,

press the TIMER key while the unit is on so that all of the

timer-related indicators are turned off. (The setting made

above is still left in memory.)

÷ When the O.T.T. timer is set while the PROG.1 or

PROG.2 timer has been set, the reservation by the

PROG.1 or PROG.2 timer is canceled.

Put the unit in standby mode.

÷ When the unit enters the Standby mode, the standby/

timer indicator lights in green.

÷ If there is a power failure or the power cord is un-

plugged after the timer reservation has been acti-

vated, the standby/timer indicator blinks in green.

In this case, the clock setting should be restarted

from the beginning.\

Each press switches the timer as follows.

1 "O.T.T."

2 "PROG. 1"

3 "PROG. 1 2 "

4 "PROG. 1 2"

5 Extinguished

TIMER

Set the time at which you want to start playback or reception (On time).

1 Adjust the time.

2 Set it.

÷ In other areas than the U.K. and Europe the clock

shows the time of the day in the 12-hour system.

÷ The ON time can be set in steps of 5 minutes.

÷ If you make a mistake, press the menu key and restart

from step 1.

To check or modify the reservation contents, restart the timer reservation from the beginning.

The time is

advancexd

The time is re-

turned

volume / multi control

set

demo

POWER